• 한국정보통신학회논문지
• /
• 제12권2호
• /
• pp.247-253
• /
• 2008

본 논문은 모터제어센터의 감시와 제어를 통한 효율적인 운영을 위한 실시간 관리 시스템의 설계 및 구현에 대해서 논한다. 실시간 관리 시스템은 하드웨어(MCC 판넬)와 소프트웨어(관리 프로그램)로 나눌 수 있다. 첫 번째, 하드웨어는 모터가 부착된 부하부분과 제어와 데이터 네트워크를 운용할 수 있는 MCC 구성요소 이다. 두 번째, 관리 프로그램은 통신인터페이스, 환경설정, 데이터의 처리 부분으로 구성되어 있다. 제작 구현된 MCC 판넬의 축소형 모델은 m-PRO, iM-PRO 디바이스, 하이퍼터미널을 이용하여 사전 테스트하였다. 그리고 필드 테스트를 위하여 MCC 판넬은 RS-232C/485를 이용하여 테스트하였고, 관리 시스템의 통신 절차는 제어 명령을 이용하여 메시지를 송 수신하여 확인 하였다. 실험 결과, 구현한 실시간 관리 시스템은 MCC 시스템을 효과적으로 운영하는데 이용할 수 있다.

• 새물리
• /
• 제68권11호
• /
• pp.1215-1224
• /
• 2018

Most solar photovoltaic (PV) modules frequently get shadowed, completely or partially, resulting in a reduction of PV generation. This paper presents and compares the results from simulations and experimental measurements of the power output from a single PV module under various shading conditions. The study was carried out with a 90 W PV module and a 250 W PV module. The shaded area was increased from 0 to 100% for both variable and constant irradiances to analyze the effect of fluctuations in the solar irradiance certain shading conditions. The effect of shading for irradiance levels from 100 to $900W/m^2$ was investigated. Results showed that for every $100W/m^2$ decrease in the solar irradiance level, the power output decreased by 9, 0.7 and 1.5 W at 0, 25 and 50% shading, respectively. For solar irradiance levels higher than $500W/m^2$, the temperature increased by 1.6, 2.7 and $1.1^{\circ}C$ at 0, 25 and 50% shading, respectively, for every $100W/m^2$ increase in the irradiance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.591-594
• /
• 2000

This paper describes a research work of developing a computer-aided design of product with bending and piercing for progressive working. An approach to the system for progressive working is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, strip layout and die layout module. Based on knowledge-based rules, the system is designed by considering several factors such as radius and angle of bend, material and thickness of product, complexities of blank geometry and punch profile, bending sequence, and availability of press. Strip layout drawing generated by the piercing processes with punch profiles divided into for external area is simulated in 3-D graphic forms, including bending sequences for the product with piercing and bending. Results obtained using the modules enable the manufacturer for progressive working of electronic products to be more efficient in this field.

• Current Optics and Photonics
• /
• 제1권3호
• /
• pp.207-213
• /
• 2017

The Adaptive Front-lighting System (AFS) is a part of the active safety system, providing optimized vision to the driver during night time and other poor-sight conditions of the road by automatic adaptation of lighting to environmental and traffic conditions. Basically, an AFS provides four different modes of the passing beam as designated in an United Nations Economic Commission for Europe regulation (ECE324-R123): neutral state or country light (Class C), urban light (Class V), highway light (Class E), and adverse weather light (Class W). In this paper, we first present an optics design for an AFS system capable of producing the Class C/V/E/W patterns requiring only on/off modulation of multi-array LEDs with no need for any additional mechanical components. The AFS optics consists of two separated modules, cutoff and spread; the cutoff module lights a narrow central area with high luminous intensity, satisfying the cutoff regulation, and the spread module forms a wide spread beam of low luminous intensity. Each module consists of two major parts; the first converts a discretely positioned LED array into a full-filled area emitting light source plane, and the second projects the light source plane to a 25 m away target plane. With the combination of these two optics modules, the four beam patterns are formed by simple on/off modulation of multi-array LEDs. Then we report the development of a prototype that was demonstrated to provide the four beam patterns.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.396-404
• /
• 2000

Post harvest processes for rice include drying, storage and processing. Drying has a great effect on the quality of the grain. The existing rice centers are with the ill equipped, especially with drying and storage facilities. The rice harvesting has bully mechanized, a large volume of rice with high moisture content are taken to the rice processing complex(RPC). Three, the need for drying and storage facilities becomes more urgent. At present the daily drying capacity of RPC can't exceed over 40~50 M/T. Therefore new technology and facilities for a high quality and main efficient drying should be introduced one such technology is the continuous flow drying system. This research, aims to test performance efficiency the mixed continuous flow grain dryer was whose daily drying capacity is 100 M/T. The results of the performance tests of the dryer are shown as follows; (1) The temperature distribution of the drying modules were measured by a temperature recorder. The fifth module showed the highest value, followed by the seventh and the third. (2) When the intake air temperature was $55^{circ}C$, the drying rates were 1.7 and 2.6%, wb/pass in the exhaust temperatures of 20 and $22^{circ}C$. And when the intake air temperature was $60^{circ}C$, the drying rates were 1.7 and 2.3%, wb/pass in the exhaust temperatures of 22 and $25^{circ}C$. (3) The average increased rate of cracked grains after the drying process was 0.7% which is below the tolerance limit (2.0%) of the continuous grain dryer.

• 디지털산업정보학회논문지
• /
• 제10권2호
• /
• pp.13-20
• /
• 2014

In this paper, we implemented the object scanning with nxtOSEK which is an open source platform. nxtOSEK consists of device driver of leJOS NXJ C/Assembly source code, TOPPERS/ATK(Automotive real time Kernel) and TOPPERS/JSP Real-Time Operating System source code that includes ARM7 specific porting part, and glue code make them work together. nxtOSEK can provide ANSI C by using GCC tool chain and C API and apply for real-time multi tasking features. We experimented the 3D scanning with ultra sonic and laser sensor which are made directly by laser module diode and experimented the measurement of scanning the object by knowing x, y, and z coordinates for every points that it scans. In this paper, the laser module is the dimension of $6{\times}10[mm]$ requiring 5volts/5[mW], and used the laser light of wavelength in the 650[nm] range. For detecting the object, we used the beacon detection algorithm and as the laser light swept the objects, the photodiode monitored the ambient light at interval of 10[ms] which is called a real time. We communicated the 3D scanning platform via bluetooth protocol with host platform and the results are displayed via DPlot graphic tool. And therefore we enhanced the functionality of the 3D scanner for identifying the image scanning with laser sensor modules compared to ultra sonic sensor.

• 한국통신학회논문지
• /
• 제27권11C호
• /
• pp.1139-1151
• /
• 2002

본 논문에서는 스위칭 시스템의 대용량화를 위해 시분할 다중합 방식과 멀티 홉 구조를 적용한 새로운 형태의 모듈화된 광 공간 스위치를 제안하였다. 그리고 기존 광 공간 스위치와의 비교를 통해 전력 손실, 사용 소자의 수, 신호대 누화비 등의 성능이 더 우수함을 보였다. 또한, 그 구조에서의 모듈 수, M에 따른 포화 처리율을 해석한 결과, 한 모듈의 입력 포트 수(N)가 매우 클 때, M개의 모듈을 가진 스위칭 시스템의 포화 처리율은 M+l-√($M^2$+1)이 됨을 알 수 있었다. 마지막으로, 제안한 스위치에서의 셀 손실율 특성을 시뮬레이션을 통해 알아보았다. 예를 들어, $\rho$=0.9, M=8, N=32일 경우, $10^{-6}$ 이하의 셀 손실율을 얻기 위해서는 입력 버퍼의 저장 유닛의 수가 6개, 출력 버퍼의 저장 유닛의 수가 52개 이상이어야 함을 알 수 있었다.다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.768-771
• /
• 2003

Nowadays, the study on the ceramic components and modules used in telecommunication system is being performed. Duplexer is the one of the most important components and has the role of dividing Rx and Tx signal. Duplexer including the FBAR is being done vigorously LTCC is used for package like SAW package, duplexer package. In our research, LTCC material is used for FBAR duplexer package and photo-lithography for the fine line phase shifter. The good characteristics, low loss and good isolation, of duplexer is obtained by the fine line phase shifter having high characteristic impedance of stripline.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.445-450
• /
• 2012

BIPV/T (Building Intergrated PhotoVoltaic/Thermal) is combined system produces electricity and thermal energy. The heat from PV modules should be removed for better electrical performance, and can be converted into useful thermal energy. The efficiency of the PV system's performance will raise by the system removes heat from the PV. The test system is installed to top floor of the experimental house in the KEPCO Research Institute. The planned experiment is following. (1) Supplying heat energy to top floor. (2) Supplying heat and cool energy to thermal storage in the bottom of the top floor. (3) Supplying heat energy to EHP for improved performance. The experimental performance is executed from 13th February to 13th March, 2012. The solar generation of electricity is 4.04kWh under the horizontal solar radiation is $1000W/m^2$ and the air temperature is $25^{\circ}C$.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 춘계학술대회논문집
• /
• pp.147-154
• /
• 1995

In this paper, a computer-aided design system for axisymmetric deep drawing process will be described. An approach to the system is based on the knowledge based system. The system has been written in AutoLISP with personal computer. The system is composed of four main modules, such as input , geometrical design, test & rectification and user modification . The system which aids designer provides powerful capabilities for the design of axisymmetric deep drawing process.