• Title/Summary/Keyword: C-H activation

Search Result 1,315, Processing Time 0.035 seconds

Modified Activated Carbons from Olive Stones for the Removal of Heavy Metals

  • Youssef, A.M.;El-Nabarawy, Th.;El-Shafey, E.I.
    • Carbon letters
    • /
    • v.7 no.1
    • /
    • pp.1-8
    • /
    • 2006
  • The activated carbon "C" was obtained by carbonization followed by activation with steam at 40% of burn-off. Oxidized carbons C-N, C-P and C-H were obtained by oxidizing the activated carbon C with concentrated nitric acid, ammonium peroxysulfate and hydrogen peroxide, respectively. The textural properties of the carbons were determined from nitrogen adsorption at 77 K. The acidic surface functional groups were determined by pH titration, base neutralization capacity and electrophoretic mobility measurements. The cation exchange capacities of un-oxidized and oxidized carbons were determined by the removal of Cu(II) and Ni(II) from their aqueous solutions. The surface area and the total pore volume decreased but the pore radius increased by the treatment of activated carbon with oxidizing agents. These changes were more pronounced in case of oxidation with $HNO_3$. The surface pH of un-oxidized carbon was basic whereas those of the oxidized derivative were acidic. The removal of Cu(II) and Ni(II) was pH dependent and the maximum removal of the both ions was obtained at pH of 5-6. Cu(II) was more adsorbed, a phenomenon which was ascribed to its particular electronic configuration.

  • PDF

Induction of pro-inflammatory cytokines by 29-kDa FN-f via cGAS/STING pathway

  • Hwang, Hyun Sook;Lee, Mi Hyun;Choi, Min Ha;Kim, Hyun Ah
    • BMB Reports
    • /
    • v.52 no.5
    • /
    • pp.336-341
    • /
    • 2019
  • The cGAS-STING pathway plays an important role in pathogen-induced activation of the innate immune response. The 29-kDa amino-terminal fibronectin fragment (29-kDa FN-f) found predominantly in the synovial fluid of osteoarthritis (OA) patients increases the expression of catabolic factors via the toll-like receptor-2 (TLR-2) signaling pathway. In this study, we investigated whether 29-kDa FN-f induces inflammatory responses via the cyclic GMP-AMP synthase (cGAS)/stimulator of interferon gene (STING) pathway in human primary chondrocytes. The levels of cGAS and STING were elevated in OA cartilage compared with normal cartilage. Long-term treatment of chondrocytes with 29-kDa FN-f activated the cGAS/STING pathway together with the increased level of gamma-H2AX, a marker of DNA breaks. In addition, the expression of pro-inflammatory cytokines, including granulocyte-macrophage colony-stimulating factor (GM-CSF/CSF-2), granulocyte colony-stimulating factor (G-CSF/CSF-3), and type I interferon ($IFN-{\alpha}$), was increased more than 100-fold in 29-kDa FN-f-treated chondrocytes. However, knockdown of cGAS and STING suppressed 29-kDa FN-f-induced expression of GM-CSF, G-CSF, and $IFN-{\alpha}$ together with the decreased activation of TANK-binding kinase 1 (TBK1), interferon regulatory factor 3 (IRF3), and inhibitor protein ${\kappa}B{\alpha}$ ($I{\kappa}B{\alpha}$). Furthermore, NOD2 or TLR-2 knockdown suppressed the expression of GM-CSF, G-CSF, and $IFN-{\alpha}$ as well as decreased the activation of the cGAS/STING pathway in 29-kDa FN-f-treated chondrocytes. These data demonstrate that the cGAS/STING/TBK1/IRF3 pathway plays a critical role in 29-kDa FN-f-induced expression of pro-inflammatory cytokines.

Effect of Pre-Treatment Characteristics on the Gas Nitriding of Stainless Steels (스테인리스강의 가스질화에 미치는 전처리의 영향)

  • Kim, H.G.;Kim, Y.H.
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.17 no.5
    • /
    • pp.278-282
    • /
    • 2004
  • Effect of pre-treatment on the gas nitriding process of austenitic stainless steels has been investigated and the following results were obtained. Minimum pre-treatment time was decreased to 5min with increasing treatment temperature from $200^{\circ}C$ to $600^{\circ}C$. Surface activation effect by the pre-treatment was maintained in the air up to holding time of 64hr, judging from the analysis result of gas nitrided specimens. The Depth of nitrided layer of STS 304 and 316 stainless steels were ranged from $5{\mu}m$ to $90{\mu}m$ at $440^{\circ}C{\sim}600^{\circ}C$. The X-ray diffraction intensity for austenitic stainless steels were increases as nitriding temperature from $440^{\circ}C$ to $600^{\circ}C$.

DEVELOPMENT OF FINITE ELEMENT HUMAN NECK MODEL FOR VEHICLE SAFETY SIMULATION

  • Lee, I.H.;Choi, H.Y.;Lee, J.H.;Han, D.C.
    • International Journal of Automotive Technology
    • /
    • v.5 no.1
    • /
    • pp.33-46
    • /
    • 2004
  • A finite element model development of a 50th percentile male cervical spine is presented in this paper. The model consists of rigid, geometrically accurate vertebrae held together with deformable intervertibral disks, facet joints, and ligaments modeled as a series of nonlinear springs. These deformable structures were rigorously tuned, through failure, to mimic existing experimental data; first as functional unit characterizations at three cervical levels and then as a fully assembled c-spine using the experimental data from Duke University and other data in the NHTSA database. After obtaining satisfactory validation of the performance of the assembled ligamentous cervical spine against available experimental data, 22 cervical muscle pairs, representing the majority of the neck's musculature, were added to the model. Hill's muscle model was utilized to generate muscle forces within the assembled cervical model. The muscle activation level was assumed to be the same for all modeled muscles and the degree of activation was set to correctly predict available human volunteer experimental data from NBDL. The validated model is intended for use as a post processor of dummy measurement within the simulated injury monitor (SIMon) concept being developed by NHTSA where measured kinematics and kinetic data obtained from a dummy during a crash test will serve as the boundary conditions to "drive" the finite element model of the neck. The post-processor will then interrogate the model to determine whether any ligament have exceeded its known failure limit. The model will allow a direct assessment of potential injury, its degree and location thus eliminating the need for global correlates such as Nij.

A Study on the Effect of Liriopis tuber water extract on Hydrogen Peroxide-stimulated C6 Astrocyte Cells (과산화수소 자극으로 활성화된 C6 성상교세포에 대한 맥문동추출물의 조절 효능 연구)

  • Park, Ki Ho;Kang, Seok Yong;Jung, Hyo Won;Park, Yong-Ki
    • The Korea Journal of Herbology
    • /
    • v.35 no.4
    • /
    • pp.9-16
    • /
    • 2020
  • Objective : To identify the effects of the water extract of Liriope platyphylla tuber (Liriopis tuber, LT) on the activation of astocytes, we investigated the regulatory effects of LT extract on H2O2-induced oxidative damage in C6 rat astrocytes. Methods : LT extract was extracted with boiling water. C6 cell line were treated with LT extract at 1, 2, and 3 mg/㎖ or without for 30 min and then stimulated with H2O2 at 5 ㎛ for 24 hr. The cell viability was measured by MTT assay. The expression of glial fibrillary acidic protein (GFAP), signal transducer and activator of transcription 3 (STAT3), phospho-STAT3 (pSTAT3), cyclooxygenase (COX-2), Nuclear factor-κB (NF-κB), superoxide dismutase 2 (SOD2), heme oxygenase-1 (HO-1), catalase, Akt, phospho-Akt (p-Akt) phosphoinositide 3-kinases (PI3K), and protein kinase C alpha (PKCα) proteins were determined by Western blot, respectively. GFAP expression was also observed with immunocytochemistry under a fluorescence microscope. Results : LT extract induced cell proliferation in H2O2-stimulated C6 cells. LT extract significantly inhibited the expression of GFAP, NF-κB and COX-2 and increased the expression of HO-1 and the phosphorylation of STAT3 in H2O2-stimulated C6 cells. LT extract also significantly increased the phosphorylation of Akt and decreased the expression of PKCα in a dose-dependent manner in H2O2-stimulated C6 cells. Conclusions : LT extract can regulate H2O2-induced activation of astrocytes through inhibiting the expression of NF-κB, COX-2 and regulating Akt / HO-1, STAT3 or PKCα signaling pathway.

Stability of [D-Ala$^2$]-Methionine Enkephalinamide in Aqueous Solution (수용액중 [D-알라$^2$-메치오닌엔케팔린아미드의 안정성)

  • 전인구;양윤정;이치호
    • Biomolecules & Therapeutics
    • /
    • v.1 no.1
    • /
    • pp.31-36
    • /
    • 1993
  • To evaluate the feasibility of transmucosal delivery of methionine enkephalin analog, [$D-Ala^2$]-me-thionine enkephalinamide (YAGFM), the influence of pH, temperature, ionic strength and initial peptide concentration on the physicochemical stability of YAGFM in aqueous buffered solutions were investigated using a stability-indicating HPLC method. The degradation of YAGFM followed the pseudo-first-order kinetics. From the pH-rate profile, the maximum stability of YAGFM was shown to be at the pH of about 5.0. The halflife for the degradation of YAGFM was found to be 181.3 days at pH 5.0 and $37^{\circ}C.$ Arrhenius plots of the data obtained at 25~$45^{\circ}C$ were reasonably linear with a correlation coefficient greater than 0.99, and the activation energy was calculated to be 8.9 kcal/mole. A higher ionic strength and/or a higher peptide concentration in buffered solutions retarded the degradation of YAGFM.

  • PDF

High Performance Cements and Advanced Ordinary Portland Cement Manufacturing by HEM-refinement

  • Zoz, H.;Jaramillo V., D.;Tian, Z.;Trindade, B.;Ren, H.;Chimal-V, O.;Torre, S.Diaz de la
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 2006.09b
    • /
    • pp.1119-1120
    • /
    • 2006
  • High Energy Milling (HEM) is applied for the grinding of cement and this can lead to substantial refinement $(<2{\mu}m)$ and mechanically activation of the powder particles. The present paper reviews the preliminary studies, explains the novel technique and suggests the route into commercial application. Particular attention is paid to wear results with an applied $Si_3N_4-grinding$ unit where no substantial wear was found after 4000 h of operation.

  • PDF

Production of Activated Carbon from Woody Fishing Port Wastes Using Sulfuric Acid as Activating Agent (목질(木質) 어항(漁港) 폐기물(廢棄物)을 원료(原料)로 한 황산(黃酸)에 의한 활성탄(活性炭) 제조(製造))

  • Kim, Dong-Su;Lee, Jung-Eun
    • Resources Recycling
    • /
    • v.15 no.2 s.70
    • /
    • pp.50-57
    • /
    • 2006
  • Production of activated carbon from woody fish parking cases has been studied using waste sulfuric acid as an activating agent for the purpose or promoted recycling of woody fishing port wastes. The adsorption capacity of produced activated carbon was observed to increase with activation temperature and reached its maximum at ca. $650^{\circ}C$ under the experimental conditions. However, the adsorption capacity of activated carbon became deteriorated above this temperature due to the thermal degeneration of its structure. Optimal activation time was found to be about 120 minutes and 1:3 weight ratio of raw material and activating agent was appropriate for increased adsorption capacity of activated carbon under the conditions of $550^{\circ}C$ and 60 minutes of activation time. Regarding the effect of the concentration of activating agent on activation, ca. 1.2 M of sulfuric acid was observed to be proper for an optimal activation or raw material. Comparison of the activation power of sulfuric acid with nitric acid showed that sulfuric acid was superior to nitric acid, however, with regard to the yield of activated carbon there was no significant difference between the two activating agents. The degree of dispersion of carbon particles was shown to be relatively high in neutral condition and the produced activated carbon was considered to be effectively employed for the treatment of metal ions in wastewater due to its negative surface charge in aqueous condition.

Antidiabetic Activities of Extract from Malva verticillata Seed via the Activation of AMP-Activated Protein Kinase

  • Jeong, Yong-Tae;Song, Chi-Hyun
    • Journal of Microbiology and Biotechnology
    • /
    • v.21 no.9
    • /
    • pp.921-929
    • /
    • 2011
  • Stimulation of AMP-activated protein kinase (AMPK) signaling followed by increase of glucose uptake in L6 myotubes were studied with organic solvent extract of Malva verticillata (MV) seeds. Ethanol extract of M. verticillata seeds (MVE) significantly increased the phosphorylation level of AMPK, acetyl-CoA carboxylase (ACC), and glucose uptake in L6 myotube cells. The MVE was fractionated with n-hexane (MVE-H), chloroform (MVE-C), ethylacetate (MVE-E), n-butanol (MVE-B), and water (MVE-W). MVE-H (150 ${\mu}g$/ml) showed the highest phosphorylating activity and increased glucose uptake by 2.3-fold. Oral administration of MVE-H (40 mg/kg) for 4 weeks to type 2 diabetic (db/db) mice reduced non-fasting and fasting blood glucose levels by 17.1% and 23.3%, respectively. Phosphorylation levels of AMPK and ACC in the soleus muscle and liver tissue of db/db mice were significantly increased by the administration of MVE-H. MVE-H was further fractionated using preparative HPLC to identify the AMPK-activating compounds. The NMR and GC-MS analyses revealed that ${\beta}$-sitosterol was a major effective compound in MVE-H. Phosphorylation levels of AMPK and ACC, and glucose uptake were significantly increased by the treatment of MVE-S (${\beta}$-sitosterol) isolated from M. verticillata to L6 cells, and these effects were attenuated by an AMPK inhibitor (Compound C) pretreatment. These results, taken together, demonstrate that increased glucose uptake in L6 myotubes by MVE-H treatment is mainly accomplished through the activation of AMPK. Our finding suggests that the extract isolated from M. verticillata seed would be beneficial for the treatment of metabolic disease including type 2 diabetes and hyperlipidemia.