• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.4
• /
• pp.435-443
• /
• 1989

The regulation of the synthesis of alcohol-oxidase(E. C. 1. 1. 3. 13) was investigated in the methanol-utilizing yeasts during growth on different carbon sources. For this experiment, Pichia pastoris CBS 2612 and Pichia pastoris CBM 10 were cultured in mineral salt medium by changing its carbon sources. The production of alcohol-oxidase was varied by the carbon sources. For example, alcohol-oxidase was undetectable in all strains submitted to the test in the medium with glucose, but its production was rapidely increased when the carbon source was changed from glucose to methanol after 48hrs of incubation. Moreover, this enzyme was not synthesized during growth on the primary aliphatic alcohols alone(ethanol, propanol, butanol or pentanol) or on the mixed substrates(0.5% methanol+0.5% primary aliphatic alcohols). When cells were grown on the various carbon sources(glucose, xylose, lactose, glycerol, galactose, saccharose, sorbose, lactic acid or acetic acid), The alcohol-oxidase activity was detected a very little amounts. These carbon sources together with methnol yieled far better synthesis of alcohol-oxidase than in case of carbon sources alone. Especially, the alcohol-oxidase activity of the cells grown on sorbose, lactose or lactic acid together with methanol was far better or similar than that of cells grown on methanol alone. The apparent Km values for the methanol of Pichia pastoris CBS 2612 and Pichia pastoris CBM 10 enzymes were 1.92 and 210 mM, respectively. It is also active towards alcohols of shorter alkyl-chain length than $C_7$, insaturated alcohols(allylalcohol, crotyl-alcohol) and secondary alcohols (iso-amylacohol, iso-butylalcohol). The affinity of alcohol-oxidase for this alcohols decreased with the increasing length of the alkyl-chain.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.2
• /
• pp.49-57
• /
• 1991

A simple system to measure the correlated color temperature ($T_c$) and color rendering index ($R_a$) oflight sources was developed. And the T, and R, of incandescent lamps (I/L) and various fluorescent lamps(F/L) were measured with varying source voltage and power frequency. As results, $T_c$ variations of I/L and F/L with varying source voltage were relatively large, but $R_a$, variations were small. And $T_c$, $R_a$, variations of F/L under 5OkHz of power frequency were small, but over 50kHz, it is supposed that $T_c$, and $R_a$, will vary significantly.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.2
• /
• pp.211-213
• /
• 1996

A study was undertaken to investigate the effect of feeding early weaning diets based on different vegetable protein sources fed to Afghani lambs. Three isonitrogenous and isocaloric complete formula diets viz., A, B and C were prepared having cottonseed meal, soybean meal and canola meal; respectively as major source of protein. Eighteen 30-35 days old Afghani male lambs were randomly allotted to three experimental diets. Lambs were fed individually twice a day for a period of 60 days. Daily feed intake and weekly weight gain was recorded. Results indicated that weight gain was significantly(p<0.05) higher(282 g/lamb/day) in lambs fed diet B as compared to lamvs fed on diets A(231 g/lamb/day) and C(242 g/lamb/day). No significant difference was found in feed intake among the diets. Significant difference(p<0.05) were noticed in feed efficiency in lambs fed on diets A(6.88), B(5.41) and C(6.17).The economic efficiency was observed to be the best on diet B as compared to diets A and C. It was concluded that Afghani lambs(30-35 days) can be reared on early weaning diets and soybean meal was found comparatively better protein source for early weaning diet.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.5
• /
• pp.431-439
• /
• 2014

Recently, a demand for precision 5-axis machine tools is significantly increasing, and the maintenance of machine tool accuracy becomes more important. it is very difficult to evaluate to accuracy of 5-axis M/C in the production site since it needs expensive measuring equipment and skilled engineer. On the other hand, evaluation items of 5-axis M/C are not systematically organized in the existing KS and ISO standards. In this study, the evaluation items for 5-axis M/C were derived systematically and a test workpiece was developed to evaluate the machine tool accuracy more easily. The error sources of machine tool can be estimated by machining and measuring of the test workpiece. The correlation between the machine tool accuracy and the accuracy of machined test workpiece was analyzed. As a result, the accuracy of machined test workpiece represented the accuracy of machine tool and the error sources very effectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.120-121
• /
• 2006

To investigate the ZnO thin films which are interested in the next generation of short wavelength LEDs and Lasers, the ZnO thin films were deposited by RF magnetron sputtering system. Al sputtering process of ZnO thin films substrate temperature, work pressure respectively is $100^{\circ}C$ and 15 mTorr, and the purity of target is ZnO 5N. The ZnO thin films were in-situ annealed at $600^{\circ}C$, $800^{\circ}C$ in $O_2$ atmosphere. Phosphorus (P) and arsenic (As) were diffused into ZnO thin films sputtered by RF magnetron sputtering system in ampoule tube which was below $5{\times}10^{-7}$ Torr. The dopant sources of phosphorus and arsenic were $Zn_3P_2$ and $ZnAS_2$. Those diffusion was perform at $650^{\circ}C$ during 3hr. We confirmed that p-type properties of ZnO thin films were concerned with dopant sources rather than diffusion temperature.

• Journal of Sericultural and Entomological Science
• /
• v.45 no.2
• /
• pp.116-120
• /
• 2003

This study was carried out to obtain basic data on physiological characteristics for an artificial cultivation of fruiting body of C. pruinosa. C. pruinosa showed the most favorable growth on the MCM medium. The optimal condition for the mycelial growth was obtained at 25$^{\circ}C$ and pH 5.0, respectively. Carbon sources such as arabinose, mannose, xylose were favorable for stimulating a mycelial growth and fruiting bodies of C. pruinosa. Ammonium nitrate, ammonium citrate and ammonium tartrate of nitrogen sources also appeared to be good in the mycelial growth and fruiting body formation.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.2
• /
• pp.123-128
• /
• 1993

The polyesters (polyhydroxyalkanoates; PHAs) production capability in a two-step cultivation of Alcaligenes eutrophus H16(ATCC 17699) was investigated by using various organic carbon sources. The carbon sources used included linear $C_2~C_10$ monocarboxylic acids, $C_3~C_10$ dicarboxylic acids, crotonic acid, and several linear vicinal and $\omega$-diols. The polyesters synthesized were characterized by 500 MHz $^1 H-NMR$ spectroscopy, intrinsic viscosity$[\eta]$ measurement in chloroform and differential scanning calorimetry (DSC). The PHAs synthesis data showed that the use of C-odd ($C_3, C_5, and C_7$) monocarboxylic acids resulted in poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(P(3HB-co-3HV) (3HV content ranging 40 to 70 mol%) while the use of $C_9$ substrate gave the copolyester containing only 4 mol% of 3HV. All culture products obtained on $C_3$~C$_{10}$ dicarboxylic acids gave exclusively P(3HB). 500 MHz $^1 H-NMR$ analysis showed that all polyesters synthesized generally contained 1~2 mol% 3HV even for the unrelated substrates such as the carboxylic acids with even number of carbon. When $\alpha, \omega$-diols with even number of carbon were used as substrates, 4-hydroxybutyrate(4HB) was inserted into the polyester chain composed of P(3HB-co-4HB). Vicinal diols were generally not utilized by the bacterium for polyester production.n.

• Applied Biological Chemistry
• /
• v.18 no.3
• /
• pp.109-116
• /
• 1975

In order to utilize the agricultural waste products for animal feeds, two high xylanase producing mold strains were selected from various sources of samples. The optimum conditions of xylanase production and the characteristics of the mold enzyme were investigated,and summarized as follows. 1. Two Aspergillus niger strains (experimental No. 1701 and 430) showed the high xylanase activity. 2. The highest xylanase production was obtained at pH 5.0-6.0 in two days. 3. Xylanase production in strain 1701 was increase with the addition of carboxy methyl cellulose, $NH_4H_2PO_4$ and corn steep liquor as carbon sources and natural nutrients, as respectively, while the other carbon, nitrogen, phosphate sources, natural nutrients and minerals gave no remarkable effect. In the strain 430, the enzyme procuction was not effected with the above substrate sources. 4. Maximum xylan hydrolysis reaction with the crude enzyme extract (33.3% v/v) was obtained in the 2% substrate concentration at pH 5.0 and $60^{\circ}C$ in three hours in both strains. 5. Maximum xylan hydrolysis rate was 95% at the optimum conditions for xylanase activity.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.4
• /
• pp.421-428
• /
• 2000

Accelerator Mass Spectrometry (AMS) is presented for the applications to the environmental research. Traditionally the radiocarbon (14C) measurements have been made for the purpose of dating the archaeological and geological samples. 14C measurements using AMS however have become the more useful methods for the study of environmental science such as antropogenic modification of atmosphere and the determination of mixing ratios of fossil and biomass products. Such 14C AMS measurements have been extended to the discovery of new chemical tracers for investigations of sources of excessive contributions of CO2, CO, CH4 and other carbon-bearing molecules in the atmosphere.

• Proceedings of KHEA Conference
• /
• 1997.07a
• /
• pp.227-227
• /
• 1997