• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.9C
• /
• pp.842-852
• /
• 2002

The fast advance in the VoIP technologies gives a rich opportunity to create different kind of VoIP applications such as IP telephony services. The application level call signaling protocols such as ITU-T H.323 and IETF SIP provide the communication functions of end-to-end call setup and release. Currently, there is a lot of H.323 based VoIP products in the market, however SIP is considered as a suitable protocol for supporting applications in IP environments, so SIP based VoIP products and services begin to appear. In this paper, firstly we present the characteristics of some possible SIP based applications and describe the design and implementation of a VoIP example service named PC-to-PC Internet telephony service using the developed SIP network components. The PC-to-PC Internet telephony service and User Agent are developed in MS window 98/2000 using visual C/C++, and Proxy server and Registrar in Linux 7.0 using C, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2113-2120
• /
• 2015

This paper presents an integrated receiver to support multimode broadcasting standards such as DVB-T2, DVB-C2, and DVB-S2 in a single platform. The integrated receiver consists of a tuner block, a receiver engine, a frame processor, and an A/V decoder. The receiver engine includes a channel decoding engine and a demodulation engine to perform OFDM and APSK demodulations. The frame processor performs deinterleaving and BB frame decoding functions. The demodulator engine and the frame processor are implemented in two FPGA devices and DSP-based embedded software, respectively. To verify the functionality of the integrated receiver, it is tested in the laboratory. Commercial PC-based modulators are used to generate the DVB-T2, DVB-C2, and DVB-S2 modulated signals. The integrated receiver was tested under various operation modes as specified in the standards such as DVB-T2, DVB-C2, and DVB-S2 and showed successful operation in all the scenarios tested.

• Microbiology and Biotechnology Letters
• /
• v.6 no.4
• /
• pp.173-179
• /
• 1978

1) To study the productivity of single cell protein from the n-paraffin utilizing yeast, 235 yeast strains were isolatea from 90 samples 2) Optimum cell growth temperature of three strains selected was 40~45$^{\circ}C$ and these were identified as Candida tropicalis, Candida krusei and Torulopsis molischiana. 3) A-28 strain easily assimilated tetradecane, hexadecane and octadecane, but B-8 strain and C-15 strain assimilated more hexadecane than other n-paraffins. 4) Out of the selected three strains, the mass doubling time, specific growth rate and cell yield were 3.4~4.0 hours, 0.170~0.215, 86~98%, respectively. 5) Crude protein, fat, fiber, ash and nitrogen free extract of the selected three strains were found to be 48.2~61.2% 3.7~8.0%, 3.5~4.2%, 5.6~6.7%, 23.5~31.8%, respectively, and thiamine and riboflavin contents of dried yeast cell were 0.78~0.93 mg% and 6.03~7.3 mg%, respectively. 6) Yeast protein contained evenly most of amino acid, but the sulfur-containing amino acids were particularly low.

• Journal of the Korean Society of Radiology
• /
• v.14 no.1
• /
• pp.69-75
• /
• 2020

Multilayer mirrors have widely been used not only in the industry but also in the medical field. X-ray reflectivity was measured by X-ray diffractometer to evaluate the performance of W/C multilayer mirror with 40 layers. Genetic algorithm are used to obtain thickness, density, and interfacial roughness for each of the 40 layers. The existing uniform random selection causes a problem that the solution does not converge or the error increases even if it convergence. To reduce the time to calculate the fitness of the genetic algorithm, the genetic algorithm was written in C/C++ parallel programming. The genetic algorithm showed excellent scalability of linear time increase with increasing number of generation and population. The genetic algorithm was selected with uniform and Gaussian randomness of 1:1 to improve the convergence of solution. The improved genetic algorithm can be applied to characterize each layer of a sample with more than a few tens of layers, such as a multilayer mirror.

• Korean Journal of Microbiology
• /
• v.31 no.4
• /
• pp.261-266
• /
• 1993

A new methyltrophic bacterium which utilizes methanol as a sole source of carbon and energy was isolated from soil. It was Gram-negative, nonmotile, nonspore-forming rod, and strictly aerobic bacterium. Catalase and oxidase activities were present. Nitrate was reduced to nitrite. Vitamins and other growth factors were not required. Generation time was 1.6 hr under the optimal condition. The isolate assimilated methanol via the ribulose mono-phosphate pathway (Enter-Doudoroff varient) and did not have .alpha.-ketoglutarate dehydrogenase. It assimilated ammonia through glutamate dehydrogenase. The guanine plus cytosine content of the DNA was 61.0 mol%. The celular fatty acid composition was primarily straight-chain saturated $C^{16 : 0}$ acids (palmitic acids) and unsaturated $C_{16 :1}$ acid (palmitoleic acids), and the isolate also contained two unidentified $C_{17}$ branched fatty acids. The major ubiquinone was Q-8, and Q-6 and Q-7 were present as minor components. Phosphatidylethanolamine and phosphatidylglycerol were predominantly present, and diphosphatidyglycerol was also detected. Based on the physiological and biochemical properties, the isolate was assigned to a novel species of the genus Methylobacillus, Methylobacillus methanolovorus sp. nov.

• Plant Journal
• /
• v.10 no.3
• /
• pp.45-51
• /
• 2014

This study performs several experiments on a newly developed temperature safety system that can be used for residential building heating systems, the heat source of which is derived from a conventional fuel cell. Prior to this, the hot water made from a fuel cell was not used in residential housing but just went to waste. The present safety system is installed in the current underfloor heating system. At first we used the CFD technique to develop a new heat exchanger. The fuel cell must satisfy the thermal conditions of the inlet temperature being $55^{\circ}C$ and the outlet temperature being $60^{\circ}C$. But variations in weather cause fluctuations in the heating water temperature. The experimental results show our new system capable of maintaining the temperature difference within a ${\pm}0.5^{\circ}C$ range. So we believe that our new PFMFC fuel cell stack array is a good candidate for being used in residential heating systems.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.355-361
• /
• 2011

In order to properly evaluate ITS services exposed in SMART Highway project, a confident dynamic origin-destination (OD) is inevitably needed. This paper used WAVE communication information as a part of call and response (C&R) communication which constitutes core part of the technology for constructing OD. This information includes node information and vehicle information (e.g., latitude and longitude) as well as trajectory data and sample path volume date calculated using node information and vehicle information. A procedure developed to construct a dynamic OD and to validate OD is consist of 1) making toy network and one-hour 00 (random distribution), 2) collecting link information and vehicle information, 3) constructing five-minute OD, and 4) validating estimated OD result using traffic volume and travel time simultaneously. The constructed OD is about 84.79% correct within less than 20% error range for 15min traffic volume, and about 85.42%, within less than 20% error rate of 15 min travel time. Some limitations and future research agenda have also been discussed.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.249-253
• /
• 2000

We have analyzed electrical characteristics of the amorphous $MgTiO_3$thin films deposited by pulsed laser deposition (PLD) technique with the temperature of 400~$500^{\circ}C$. The electrical characteristics of $MgTiO_3$films heavily depend on the deposition temperature. We speculate that the density of anomalous positive charge (APC) substantially increases as the deposition temperature lowers, causing the HF C-V curves shift to the direction of the negative gate voltage. We further observed that both the degree of C-V shift as a function of the deposition temperature and the density of APC were minimized by the use of $SiO_2$with thickness of approximately 100 $\AA$ between $MgTiO_3$films and the Si substrate.

• Korean Journal of Microbiology
• /
• v.25 no.4
• /
• pp.346-352
• /
• 1987

One hundred and seventeen colonies were screened for the detection of the production of exodextranase on the dextran-mineral salts medium. Ten colonies out of them produced the dextranase. Flavobacterium multivorum greatly producing the enzyme was isolated from soil, identified and then studied for various biochemical characteristics. The activity of the dextranase in the cultured medium was high between pH8 and 9 at $35^{\circ}C$, and between $45^{\circ}C$ and $55^{\circ}C$ at pH8. By the growth curves the generation times of the bacterium were approximately 52 minutes in the LB broth, 38 minutes in the LB plus 1% dextran and 660 minutes in the dextran-salts. The strain did not have ant plasmid, and was susceptible to genramicin, cotrimoxazole and cefoperazone, and moderately susceptible to chloramphenicol, cefamandole and cefotaxime, but resistant to ampicillin, cephalothin, tetracycline, amikacin and tobramycin.

• International Area Studies Review
• /
• v.22 no.3
• /
• pp.149-174
• /
• 2018

This paper takes a close look at technology related services of e-Commerce companies from the viewpoint of B2C customers. The goal is to determine at which specific points of the customer purchase journey changes should occur, to address consumers' personal needs more effectively. All ten technologies examined fall into one of the following steps of the customer purchase journey: Decision Making, Payment Methods, and Delivery. AHP was utilized to clarify the preferences of millennials from Germany and Korea. The findings show that factors such as country of origin and gender had an impact on the preferences of the survey participants. In case of Germany, women replied that a change in Payment Methods would lead to significant enhancement of their shopping experiences, whereas men favored Decision Making. As for Korea, both genders stated that Decision Making should be the focus of marketers' efforts. One of the main findings was that participants from Germany and Korea exhibited different tastes in the use of technologies. Germans preferred functional technologies, whereas Koreans favored technologies which are more engaging and entertaining.