• 한국재료학회지
• /
• 제8권6호
• /
• pp.505-512
• /
• 1998

플라즈마 용사법을이용하여 AISI 316 스테인레스 금속모재에 0.1mm 두께의 $NiCrAlCoY_{2}O_{3}$금속 결합층과 0.3mm 두께의 $ZrO_{2}(8wt%Y_{2}O_3$) 세라믹층으로 구성된 이층 단열코팅층을 제조하였다. 코팅층의 미세조직, 금속결합층의 산화를 고찰하였으며, $900^{\circ}C$에서 등은 시험과 열반복시험 후, 접합강도시험을 통하여 코팅층의 단사정 상은 열처리시간이 길어질수록 약간 증가하였다. 또한 비변태성 t'의 c/a는 용사상태에서 1.0099이였으며, 100시간 열처리 후에는 1.0115로 약간 증가하였다. 그리고 용사층의 접합강도는 열처리 시간이 길어질수록 감소하였다. 등온열처리 후에는 1.0115로 약간 증가하였다. 그리고 용사층 의 접합강도는 열처리 시간이 길어질수록 감소하였다. 등온열처리 후, 파괴는 주로 세라믹층에서 일어났으며, 반복 열처리되 시편에서는 10회 이후 대부분 금속결합층/세라믹층의 계면에서 일어났다.

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.743-752
• /
• 2007

Statement of problem. The aims of the study were to evaluate the effect of current surface conditioning methods on the bond strength of a resin composite luting cement bonded to ceramic surfaces and to identify the optimum cement type. Material and methods. The sixty zirconia ceramic specimens(10 per group) with EVEREST milling machine and 60 tooth block were made. The zirconia ceramic surface was divided into two groups according to surface treatment: (1) airborne abrasion with $110{\mu}m$ aluminum oxide particles; (2) Rocatec system, tribochemical silica coating. The zirconia ceramic specimens were cemented to tooth block using resin cements. The tested resin cements were Rely X ARC, Panavia F and Superbond C&B. Each specimen was mount in a jig of the universal testing machine for shear strength. The results were subjected to 2-way ANOVA and Post hoc tests was performed using Tukey, Scheffe, and Bonferroni test. Results. The mean value of shear bond strength(MPa) were as follows: $$RelyXARC(+Al_2O_3),5.35{\pm}1.69$$; $$RelyXARC(+Rocatec),8.50{\pm}2.13$$; $$PanaviaF(+Al_2O_3),9.58{\pm}1.13$$; $$PanaviaF(+Rocatec),12.98{\pm}1.71$$; $$SuperbondC&B(+Al_2O_3)8.27{\pm}2.04$$; $$SuperbondC&B(+Rocatec),14.46{\pm}2.39$$. There was a significant increase in the shear bond strength when the ceramic surface was subjected to the tribochemical treatment(Rocatec 3M) in all cement groups(P<0.05). Bonding strengths of cements applied to samples treated with $Al_2O_3$ were compared; Rely X ARC showed the lowest values, whereas Panavia F cement showed higher value than that of Superbond C&B group with no statistical significance. When the bond strength of cements with of Rocatec treatment was compared, Rely X ARC showed lowest values. Overall, it was apparent that tribochemical treated Super-Bond possessed higher mean bond strength (14.46MPa; P<0.05) than that of Panavia F cement group with no significance. Conclusions. Silica coating followed silanization(Rocatec treatment) increase the bond strength between resin cement and zirconia ceramic. Panavia F containing phosphate monomer and Superbond C&B comprised of 4-META tend to bond chemically with zirconia ceramic, thus demonstrating higher bond strength compared to BisGMA resin cement. Superbond C&B has shown to have highest value of bonding strength to zirconia ceramic after Rocatec treatment compared to other cement.

• 대한치과보철학회지
• /
• 제51권2호
• /
• pp.73-81
• /
• 2013

연구 목적: 이 연구의 목적은 지르코니아 표면처리에 따른 3종의 레진시멘트와 지르코니아의 전단결합강도를 평가하기 위함이다. 연구 재료 및 방법: 총 143개의 디스크 모양의 지르코니아 블록(HASS Co., Gangneung, Korea) 시편을 제작하고 총 13개군(n=11)으로 나누었다. 그중9개군은 표면처리 방식(1. 알루미나 분사, 2. 알루미나 분사와 지르코니아 라이너의 도포, 3.알루미나 분사와 Rocatec (3M ESPE, Seefeld, Germany) 처리) 및 사용한 3종류의 레진시멘트(Bistite II (Tokuyama Dental Co., Japan), Panavia F2.0 (Kuraray Medical, Japan), Super-bond C&B (Sun Medical, Japan))에 따라 나누어 열순환처리 전 접착강도 실험을 시행하였다. 열순환처리 전 접착강도 실험은 위 3종류의 레진시멘트를 3가지 방법으로 표면처리한 지르코니아 시편에 접착하고, 상온의 증류수에 24시간 동안 보관한 후, 전단결합강도를 측정하였다. 열순환처리 후 접착강도 실험은, 열순환처리 전 접착강도 실험에서 우수한 전단결합강도를 보인 지르코니아 표면처리군(알루미나 분사와 Rocatec 처리를 하고 3종류의 레진시멘트를 접착한 3개의 군)과 대조군으로 알루미나만으로 표면처리 후 Super-bond C&B를 접착한 1개의 군을 대상으로 $5^{\circ}C$와 $55^{\circ}C$사이에서 5,000회 열순환처리를 시행하고 전단결합강도를 측정하였다. 결과: 열순환처리 전 접착강도 실험에서는 알루미나 분사와 Rocatec 처리를 한 지르코니아 표면에 Super-bond C&B를 접착한 군이 가장 높은 전단결합강도를 보였다. Super-bond C&B를 사용한 군이 다른 시멘트 군보다 유의성 있게 높은 전단결합강도를 보였으며, 지르코니아 표면에 Rocatec 처리를 한 군이 다른 표면처리를 한 군보다 유의성 있게 높은 전단결합강도를 보였다. 열순환처리를 한 후에는, Rocatec 처리를 한 지르코니아 표면에 Super-bond C&B를 접착한 군만이 유일하게 전단결합강도가 증가하였으며, 다른 모든 군에서는 전단결합강도가 감소하였다. 결론: 본 실험에서는 Super-bond C&B 시멘트가 가장 높은 전단결합강도를 보였으며, Rocatec 시스템은 레진시멘트와 지르코니아의 전단결합강도를 향상시키는 방법이 될 것이라고 사료된다.

• 한국결정학회지
• /
• 제15권1호
• /
• pp.1-4
• /
• 2004

上記 題目의 化合物, $C_{18}H_{20}O_5S$은 한 對非稱 單位內에 한 個의 分子를 가지고 對稱中心室間群 $P\={1}$로 結晶化 되었다. sulfonate 群內ml S 原子는 O와 C 原子들로 이루워진 四面體 環境을 維特하고 있으며, S-O 二重結合 平均 길이는 1.420(2) ${\AA}$이며 S-O 單一結合 길이는 1.598(2) ${\AA}$이고 S-C 結合 길이는 1.742(3) ${\AA}$이다. C(7)-S-O(3)-C(8) 의 비틀림 角은 100.3(2)$^{\circ}$이며, 두 個의 six-membered rings의 二面角은 42.73(20)$^{\circ}$이다.

• Journal of Microbiology and Biotechnology
• /
• 제33권12호
• /
• pp.1606-1614
• /
• 2023

Biochemical gut metabolism of dietary bioactive compounds is of great significance in elucidating health-related issues at the molecular level. In this study, a human gut bacterium cleaving C-C glycosidic bond was screened from puerarin conversion to daidzein, and a new, gram-positive C-glycoside-deglycosylating strain, Dorea sp. MRG-IFC3, was isolated from human fecal sample under anaerobic conditions. Though MRG-IFC3 biotransformed isoflavone C-glycoside, it could not metabolize other C-glycosides, such as vitexin, bergenin, and aloin. As evident from the production of the corresponding aglycons from various 7-O-glucosides, MRG-IFC3 strain also showed 7-O-glycoside cleavage activity; however, flavone 3-O-glucoside icariside II was not metabolized. In addition, for mechanism study, C-glycosyl bond cleavage of puerarin by MRG-IFC3 strain was performed in D₂O GAM medium. The complete deuterium enrichment on C-8 position of daidzein was confirmed by ¹H NMR spectroscopy, and the result clearly proved for the first time that daidzein is produced from puerarin. Two possible reaction intermediates, the quinoids and 8-dehydrodaidzein anion, were proposed for the production of daidzein-8d. These results will provide the basis for the mechanism study of stable C-glycosidic bond cleavage at the molecular level.

• 한국세라믹학회지
• /
• 제22권6호
• /
• pp.58-70
• /
• 1985

The bond strength of metal to ceramic sealing in Mo-Mn metallizing was investigated by examining the effects of flux composition in alumina ceramics particle size of molybdenum metal powder wet hydrogen atmosphere and temperature in metallizing. The maximum bond strength was obtained when the glass phase filled almost all the microstructural cavities around the interfacial area with few micropores. Such a favorable microstrcutre waas formed and maximum bond strength was observed between 130$0^{\circ}C$. Also the metal to ceramic bond strength was increased using finer molybdenum metal powder than coarse powder. When content of $SiO_2$ in the flux of alumina ceramics was constant metal to ceramic bond strength was improved with increasing the ratio of CaO to MgO in the flux.

• 한국재료학회지
• /
• 제9권1호
• /
• pp.73-80
• /
• 1999

The effect of alloy compositions of the bond coating on the plasma sprayed-thermal barrier coatings was investigated. The performance of the coating composed of Rene80/NiCrAl/ZrO$_2$-CeO$_2$-Y$_2$O$_3$ and Rene80/CoNiCrAlY/ZrO$_2$-CeO$_2$-Y$_2$O$_3$was evaluated by isothermal and thermal cyclic test in an ambient atmosphere at 115$0^{\circ}C$. The failure of Rene80/NiCrAl/ZrO$_2$-CeO$_2$-Y$_2$O$_3$ coatings was occurred at the bond coating/ceramic coating interface while Rene80/CoNiCrAlY/ZrO$_2$-CeO$_2$-Y$_2$O$_3$ coating was failed at the substrate/bond coating interface after thermal cyclic test. The lifetime of Rene80/NiCrAl/ZrO$_2$-CeO$_2$-Y$_2$O$_3$coatings was longer than Rene80/CoNiCrAlY/ZrO$_2$-CeO$_2$-Y$_2$O$_3$coating. The oxidation rate of the NiCrAl bond coating examined by TGA was lower than CoNiCrAlY bond coatings. In summary, these results suggest that Rene80/CoNiCrAlY/ZrO$_2$-CeO$_2$-Y$_2$O$_3$system as thermal barrier coating be not suitable considering the durability of the coating layer for high temperature oxidation and thermal stress.

• Journal of Applied Biological Chemistry
• /
• 제43권1호
• /
• pp.37-43
• /
• 2000

1,3,2-Dioxaphosphorinanes are suitable compounds for studying the stereochemistry of substitution at phosphorus. Cis- and trans-5-hydroxymethl-5-methyl-2-thiono-2ethoxy-1,3,2-dioxaphosphorinane were prepared, and their structures and stereochemistry unambiguously assigned by NMR and X-ray crystallography with acetoxy and 3,5-dinitrobenzoyloxy derivatives, respectively. Trans isomer gave $^{31}P$ NMR signal at higher field than cis isomer, and the ring proton Spectrum of cis isomer showed characteristic pattern for identifying its geometry. In X-ray crystallography they adopted a chair conformation with the ethoxy groups in the axial positions, and the sulfide groups in the equatorial positions. A flattening of the ring around the phosphorus center was noted, the POC bond angles were about $120^{\circ}$, and the C-O bonds in the ring were significantly longer than the C-O bond for the ethoxy group or the C-O bond for hydroxyl group.

• Bulletin of the Korean Chemical Society
• /
• 제16권10호
• /
• pp.912-915
• /
• 1995

Ornidazole, C7H10ClN3O3, crystallizes in the triclinic, space group P1^, with a=13.605(2), b=14.054(1), c=8.913(5) Å, α=71.59(2), β=78.73(2), γ=64.86(1)°, μ=3.26 cm-1, Dc=1.499 g/cm3, Dm=1.497g/cm3, F(000)=684, and z=6. Intensities for 2693 unique reflections were measured on a CAD4 diffractometer with graphite-monochromated Mo-Kα radiation. The structure was solved by direct method and refined by block-diagonal least squares to a final R of 0.081 (Rw=0.047) for 1952 reflections with Fo>3σ (Fo). The asymmetric unit contains three independent molecules of the title compound. The bond lengths and bond angles are comparable with the values found in the other nitro-substituted compounds. The nitro groups are rotated (6.9°, 6.6°, 2.6° for the three independent molecule, respectively) about the C-N axes from the imidazole planes. The crystal structures are linked by two intermolecular hydrogen bonds of O-H---N type and one intermolecular hydrogen bond of O-H---O type.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.13-16
• /
• 2012

Zinc oxide (ZnO) films were deposited by an RF magnetron sputtering system with the RF power of 200W and 300W and flow rate of oxygen gases of 20 and 30 sccm, in order to research the growth of ZnO on carbon doped silicon oxide (SiOC) thin film. The reflectance of SiOC film on Si film deposited by the sputtering decreased with increasing the oxygen flow rate in the range of long wavelength. In comparison between ZnO/Si and ZnO/SiOC/Si thin film, the reflectance of ZnO/SiOC/Si film was inversed that of ZnO/Si film in the rage of 200~1000 nm. The transmittance of ZnO film increased with increasing the oxygen gas flow rate because of the transition from conduction band to oxygen interstitial band due to the oxygen interstitial (Oi) sites. The low reflectance and the high transmittance of ZnO film was suitable properties to use for the front electrode in the display or solar cell.