• Korean Journal of Food Science and Technology
• /
• v.15 no.1
• /
• pp.56-61
• /
• 1983

Direct production of biomass from starch using amylolytic yeast, Sporobolomyces holsaticus FRI Y-5 was studied with varying the ratios between carbon and other nutrient sources in the medium. It was investigated under condition of constant C/P and C/S ratio to influence the initial concentration of starch $(S_o)$ and C/N ratio on its growth which is described as the specific growth rate $({\mu})$, cell yield (Y), the maximum concentration of cell $(X_m)$, and productivity (P). They were very dependent on both $S_o$ and C/N ratio. The form of the relationship between and ${\mu}$ and $S_o$ was observed to be similar to saturation kinetics at C/N = 100 but presented substrate inhibition at other C/N ratios. As $S_o$ was changed from 22.5 to 90 g/l, Y was observed to vary with C/N ratios but seemed to decrease as a wholes. $X_m$ was linearly related to $S_o$ at more than C/N = 50 but at less than C/N = 10 substrate inhibition was presented. P increased suddenly to $S_o$ = 45 g/l and then changed decreasingly at less than C/N = 50, but at more than C/N = 100 it changed increasingly. The effect of C/P ratio and C/S ratio on the yeast growth was also investigated at constant $S_o$ and C/N ratio. ${\mu}$ was dependent on C/P and C/S ratios, but Y, independent on them. But $X_m$ was reliant upon C/P ratio but not upon C/S ratio.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.220-221
• /
• 2018

Test results showed that foaming ratio of autoclaved aerated concrete significantly affected by the CaO/Si₂O (C/S) molar ratio of the component materials, indicating the greatest foaming ratio of 202% when the C/S ratio was 0.9.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.3
• /
• pp.35-42
• /
• 2011

The exterior system of buildings, which is the typical curtain wall, has been made with glass and metal. Theses materials, however, have weaknesses such as inadequate insulating quality, short durability, combustibility and toxic substance. On the other hand, Autoclaved Aerated Concrete(AAC) or Autoclaved Lightweight Concrete(ALC) possess the great energy efficiency and the superb insulating quality as substitute of existing exterior system materials. In this research, strength characteristics and bubble dispersion of hydrothermal synthesis process of AAC based on CaO/$SiO_2$(C/S) ratio are analyzed. C/S ratio is determinated and bubble distribution and compressive strength are studied through the test of varied water-to-solid mineral ratio(W/S). In hydrothermal synthesis program, final C/S ratio is determined as 0.7 consider of the manufacturing process and hydrothermal synthesis is done at $180^{\circ}C$ for 7 hours. The analysis shows slurry has about 2,300cP viscosity and 0.56 specific gravity therefore it is expected AAC has the appropriate facility in the manufacturing process and Hydrates of AAC's Expansion.

• Restorative Dentistry and Endodontics
• /
• v.5 no.1
• /
• pp.29-34
• /
• 1979

The purpose of this study was to measure thermal expansions of dental investments, Biovest(Casting Investment. Dentsply International INC, U.S.A.), Multi-Best (Use for all dental chrome-cobalt alloys, The Ransom & Randolph Co. U.S.A.), Kerr(Inlay Investment. Sybron Kerr, U.S.A.), O. K. (Inlay Investment. Shofu Dental MFG, Co. Japan), Whip-Mix (Cristobalite Inlay Investment. Whip-Mix Corporation. U.S.A.). Thermal expansion of specimens(5mm in diameter and 50mm in length) was measured by a dilatometer at the temperature range from $20^{\circ}C$ to $700^{\circ}C$ by comparing expansion between standardized quartz and experimental specimens with heating rate about $300^{\circ}C$/hr. The following results were obtained. 1. The coefficient of thermal expansion of Biovest was $15{\times}10^{-6}/^{\circ}C$ in the water powder ratio 18/100 and $14{\times}10^{-6}/^{\circ}C$ in the water powder ratio 28/100. Those of Multi-Best were $9{\times}10^{-6}/^{\circ}C$ in the water powder ratio 14/100 and $7{\times}10^{-6}/^{\circ}C$ in the water powder ratio 24/100. 2. The coefficient of thermal expansion of Kerr were $17{\times}10^{-6}/^{\circ}C$ in the water powder ratio 38/100 and $14{\times}10^{-6}/^{\circ}c$ in the water powder ratio 48/100. Those of O. K. were $9{\times}10^{-6}/^{\circ}C$ in the water powder ratio 33/100 and $7{\times}10^{-6}/^{\circ}C$ in the water powder ratio 43/100 3. The coefficient of thermal expansion of Whip-Mix were $14{\times}10^{-6}/^{\circ}C$ in the water powder ritio 40/100 and $12{\times}10^{-6}/^{\circ}c$ Fein the water powder ratio 50/100. Those of Hi-Heat were $11{\times}10^{-6}/^{\circ}c$ in the water powder ratio 28/100 and $10{\times}10^{-6}/^{\circ}c$ in the water powder ratio 38/100.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.130-135
• /
• 1995

We can consider that the study on early evaluation of strength of concrete is useful to raise safety of building and utility of quality control of concrete is useful to raise safety of building and utility of quality control of concrete. In this paper, was proposed to method early to predict strength of concrete with key parameters, such as Water/Cement(W/C) ratio and Sand / Aggregate(S/A) ratio. Through a series of experiment, the obtained results are summarized as follow. $\circled1$ The ratio of resistance was decteased as the increase of W/C ratio. $\circled2$ The maximum value for the ratio of resistance and compressive strength was presented in the case of 40% S/A ratio. $\circled3$ The relationship. of the ratio of resistance and compressive strength on 28days according to the change of W/C and S/A ratio is to be: $F_{28}=-0.00104R^2 + 2.263R - 935.5$ (W/C Ratio) $F_{28} = 0.007R^2 - 10.693R - 4269.1$ (S/A Ratio)

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1493-1494
• /
• 1998

We have investigated the influence of Ti/Ba mole ratio in the characteristics of the modified $BaTiO_3$ systems with Ca addition. The specimens were fabricated with variations in Ti/Ba mole ratio between 0.995 and 1.01, and sintered in the temperature range between $1325^{\circ}C$ and $1375^{\circ}C$. When Ti/Ba mole ratio was 1.005 and sintering temperature was $1350^{\circ}C$, the breakdown voltage shows 260[V /mm].

• Journal of Korean Public Health Nursing
• /
• v.31 no.2
• /
• pp.376-388
• /
• 2017

Purpose: The triglyceride-to-high-density lipoprotein-cholesterol (TG/HDL-C) ratio is one of the main predictive indices for cardiovascular disease. This study was examined the relationship between TG/HDL-C ratio and metabolic syndrome (MetS) in male office workers. Methods: Secondary analysis was conducted to determine the risk between the TG/HDL-C ratio and MetS in male office workers. A total of 765 people underwent the 'regular workplace health checkups in 2014'. Among the subjects who were male and responded to the questionnaire and health lifestyle survey, 470 (61.4%) excluding those with missing and/or abnormal values were analyzed. The association between MetS, MetS components, and the TG/HDL-C ratio was examined by a Chi-square test, One-way ANOVA, Turkey post-hoc test and Logistic regression analysis. Results: The number of males with MetS was 70 (14.9%) and the number of MetS components increased with increasing TG/HDL-C ratio (p<.001). Logistic regression analysis with an adjustment for potential confounders revealed a 31.8 times higher odds ratio of the Quartile4 group for MetS than that of the Quartile1 group (p<.001). Conclusion: These results show that the likelihood of MetS, particularly the risk of MetS in the Quartile4, increases with increasing TG/HDL-C ratio.

• Journal of the Korean Ceramic Society
• /
• v.28 no.4
• /
• pp.315-323
• /
• 1991

The preparation of zirconium carbide powders by the halogenide process of ZrCl4-C-Mg system (1:1:2, molar ratio) was studied between 300。 and 120$0^{\circ}C$ under Ar gas flow (200 mι/min). The formation mechanism and kinetics of zirconium carbide and characteristics of the synthesized powder were examined by TG-DTA, XRD, SEM and PSA. 1) The formation mechanism of zirconium carbide were as follows, above 30$0^{\circ}C$ ZrCl4(S)+Mg(s)longrightarrowZrCl2(s)+MgCl2(s) above 40$0^{\circ}C$ ZrCl2(S)+Mg(s)longrightarrowZr(s)+MgCl2(s) above 50$0^{\circ}C$ Zr(s)+C(s)longrightarrowZrC(s) 2) The apparent activation energy of the reduction-carbonization at temperature of 800$^{\circ}$to 100$0^{\circ}C$ was 11.9 kcal/mol. 3) The lattice parameter and the crystallite size of ZrC which was produced from the mixture powder of ZrCl4, C and Mg (1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were 4.700A and 180A, respectively. 4) The powders obtained from the mixture powder of ZrCl4, C and Mg(1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were agglomerate with the average size of about 13${\mu}{\textrm}{m}$ in SEM micrograph.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.175-180
• /
• 1999

The heating system of korea apartment house is called Ondol. The surface finishing mortar of this floor system typically used the cement based mortar, where the surface finishing mortar easily appears the crack. To order to crack control, the cement that added expansive additive used to reducing dry-shrinkage. For the surface finishing mortar, the types of shrinkage is known as plastic shrinkage, dry-shrinkage and autogenous This experimental study is to investigate the difference on dry-shrinkage of the cement that added expansive additives and OPC. The test method is varied the ration of water/cement (W/C) and the ratio of sand/cement(S/C). For OPC, The increase of the ratio of S/C is reduced dry-shirnkage but for the cement that added expansive additives, the increase of the ratio of S/C is augmented dry-shrinkage For OPC, The increase of the ratio of W/C is augmented dry-shrinkage but for the cement that added expensive, the increased of the ratio of W/C is reduced dry-shrinkage.

• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1163-1169
• /
• 1996

The effects of borax on the phase formation of C2S, C4A3 and $\alpha$'-C2S phases. It has negative effects on formation of C4A3 And it lowers the forming temperature of C4AF. It also has been found that borax improves the clinkerization of MBC. In the MBC clinker with borax 3% C2S have larger and more irregular shapes, larger C/S mole ratio and C4A3 have smaller size larger C/ molr ratio than in the clinker without borax.