• 대한기계학회논문집A
• /
• 제31권11호
• /
• pp.1093-1099
• /
• 2007

A compressive split Hopkinson pressure bar (SHPB) technique is used to investigate the dynamic behavior of SM45C at high temperature. A radiant heater, which consists of one ellipsoidal reflector and one halogen lamp, is used to heat the specimen. Specimens are tested from $600^{\circ}C$ to $1000^{\circ}C$ at intervals of $100^{\circ}C$ at a strain-rate ranging from 1100/s to 1150/s. A critical phenomenon occurs between $700^{\circ}C$ and $750^{\circ}C$ in SM45C. This phenomenon results in the drastic drop in a flow stress. In a modified Johnson-Cook constitutive equation, a reducer function is used to take into account for the effect of the drastic drop in a flow stress. A reducer function, which is dependant on the temperature as well as the strain, is introduced and the parameters of the modified Johnson-Cook constitutive equation are determined from test results.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.767-773
• /
• 1997

Thermal shock behavior of alumina ceramics were studied by quenching the heated alumina specimen into the water of various temperatures over 0~10$0^{\circ}C$. The critical thermal shock temperature difference ( Tc) of the specimen decreased almost linearly from 275$^{\circ}C$ to 20$0^{\circ}C$ with increase in the cooling water temperature over 0~6$0^{\circ}C$. It is probably due to the increase of the maximum cooling rate which is dependent of the convection heat transfer coefficient. The convection heat transfer coefficient is a function of the temperature of the cooling water. However, the critical thermal shock temperature difference( Tc) of the specimen increased at 25$0^{\circ}C$ over 80~10$0^{\circ}C$ due to the film boiling of the cooling water. The maximum cooling rate, which brings about the maximum thermal stress of the specimen in the cooling process, was observed to increase linearly with the increase in the quenching temperature difference of the specimen due to the linear relationship of the convection heat transfer coefficient with the water temperature over 0~6$0^{\circ}C$. The critical maximum cooling rate for thermal shock fracture was observed almost constant to be about 260$\pm$1$0^{\circ}C$/s for all water temperatures over 0~6$0^{\circ}C$. Therefore, thermal shock behavior of alumina ceramics is greatly influenced by the convection heat transfer coefficient of the cooling water.

• Corrosion Science and Technology
• /
• 제21권3호
• /
• pp.184-199
• /
• 2022

Steel was exposed in an atmospheric environment, and atmospheric environmental factors that include chloride, humidity, SO₂, NO₂ etc. induced the corrosion of steel. Corrosivity categories classified by SO₂ and chloride deposition rate were low, but those classified by TOW were high in the Korean Peninsula, and on these environmental categories, the corrosivity of atmospheres classified by corrosion rate in carbon steel was low medium, C2-C3, and medium, C3 for zinc, copper, and aluminum. This work performed the outdoor exposure test for 10 years at 14 areas in Korea and calculated the atmospheric corrosion rate of carbon steel. The atmospheric corrosion behavior of carbon steel is discussed based on the various corrosion factors. When the corrosion product forms on carbon steel by atmospheric corrosion, cracks may also be formed, and through these cracks, the environmental factors can penetrate into the interior of the product, detach some of the corrosion products and finally corrode locally. Thus, the maximum corrosion rate was about 7.3 times greater than the average corrosion rate. The color difference and glossiness of carbon steel by the 10 year-outdoor exposure tests are discussed based on the corrosion rate and the environmental factors.

• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.33-39
• /
• 1997

The crystallization temperature of an amorphous silicon (a-Si) can be lowered down to 400.deg. C by a new method : Double-metal induced lateral crystallization (DMILC). The a-Si film was laterally crystallized from Ni and Pd deposited area, and its lateral crystallization rate reaches up to 0.2.mu.m/hour at that temperature and depends on the overlap length of Ni and Pd films; the shorter the overlap length, the faster the rate. Poly-Silicon thin film transistors (poly-Si TFT's) fabricated by DMILC at 400.deg. C show a field effect mobility of 38.5cm$^{3}$/Vs, a minimum leakage current of 1pA/.mu.m, and a slope of 1.4V/dec. The overlap length does not affect the characteristics of the poly-Si TFT's, but determines the lateral crystallization rate.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.662-669
• /
• 2000

Based on the viscous flow characteristics of gas through capillary tube, a simple and low cost system was developed for controlling gas concentration for use in C.A experiments. The gas flow rate through capillary tube had a linear relationship with pressure, $(length)^{-1}$ and $(radius)^4$ of capillary tube, which agreed well with Hagen-Poiseuille's law. The developed system could control the gas concentration in storage chamber within ${\pm}0.3%$ deviation compared to the preset concentration. The required time for producing target gas concentration in storage chamber was exactly predicted by the model used in this study, and it required much longer time than the calculated time which divided the volume of chamber by flow rate. Therefore, for producing target gas concentration as quickly as possible, it needs to supply higher flow rate of gas during the initial stage of experiment when gas concentration in storage chamber has not reached at target value. It appeared that the developed system was very useful for C.A experiments. Because one could decide a desired flow rate by the prediction model, control flow rate freely and easily by changing pressure in the pressure-regulating chamber and the accuracy was high.

• 대한환경공학회지
• /
• 제36권3호
• /
• pp.214-220
• /
• 2014

본 연구는 도광판의 간격이 Chlorella vulgaris (C. vulgaris)의 증식률에 미치는 영향을 알아보고자 하였다. C. vulgaris (FC-16) ($3-8{\mu}m$)는 Jaworski's Medium 에 $22^{\circ}C$에서 15일 증식시킨 뒤 사용하였다. 실험을 위하여 네 개의 샘플을(Run 1: 225 mm 간격, Run 2: 150 mm 간격, Run 3: 112.5 mm 간격, Run 4: 90 mm 간격) 준비하여 도광판의 간격이 C. vulgaris의 증식률에 미치는 영향을 비교 실험하였다. 광효율은 Run 1이 86%, Run 2가 90%, Run 3가 92% 그리고 Run 4가 94%의 광효율을 나타내어 도광판의 간격이 짧을수록 광효율은 높았으며, 도광판의 간격에 따라 Run 1은 7일째, Run 2는 5일째, Run 3는 3일째 그리고 Run 4는 2일째에 최대 바이오매스 증식률을 나타내었다. 또한, 최대 증식률은 Run 4가 Run 1에 비해 3배 높았다. 그러나, 증식속도, 셀 당 클로로필 함량 및 단위면적 당 Cell volume 그리고 Doubling time은 Run 1과 Run 2에 비해 Run 3와 Run 4가 높았지만 Run 3과 Run 4는 크게 차이가 없었다. 따라서 경제적인 부분을 고려한다면 바이오매스의 대량생산을 위하여 Run 3의 사용이 가장 효율적이라 생각된다. measured, and the results for the toxic effect was not observed.

• 동력기계공학회지
• /
• 제3권2호
• /
• pp.51-56
• /
• 1999

Fatigue crack propagation rates and characteristics of the SA516-70 steel which is used for the low temperature pressure vessels, were studied in the room temperature of $10^{\circ}C$ and low temperature ranges of $-10^{\circ}C,\;-30^{\circ}C,\;-50^{\circ}C,\;and\;-70^{\circ}C$ with stress ratio of R=0.05. The obtained experimental results are as follows; 1) In the logarithmic relationship between the fatigue crack propagation rate(da/dN) and stress intensity factor K, the linear relationship was obtained up to da/dN > $8{\times}10^3$ mm/cycle in the same of room temperature, but in low temperature case, the relationship was extended to the range of low crack propagation rate. 2) The lower limit stress intensity factor of SA516-70 ${\Delta}K_{th}\;was\;23MPa\sqrt{m}$ and in the case of low temperature $-50^{\circ}C\;and\;-70^{\circ}C$, the crack propagation rate da/dN which showed a linear relation, reached rapidly to the ${\Delta}K_{th}$. As the results, the crack propagation rates of $-50^{\circ}C\;and\;-70^{\circ}C$ were lower than that of room temperature and according to the testing temperature the rates were decreased rapidly to the ${\Delta}K_{th}$. 3) On the relationship between the stress intensity factor ${\Delta}K$ and the track propagation cycle, the stress intensity factors of low cycle region was rapidly increased at low temperature, but ${\Delta}K$ was increased rapidly at room temperature of high cycle. 4) On the relationship between the fatigue crack propagation rate and cycle, the fatigue crack propagation rate showed higher gradient in the room temperature than the low temperature due to the increment in ductility at low temperature.

• 미생물학회지
• /
• 제36권2호
• /
• pp.84-90
• /
• 2000

Psudomonas sp. RY-1이 생성하는 extracellular depolymerase system을 이용하여 단위체의 결가지에 서로 다른 탄소 길이와 불포와기를 함유하는 medium-chain-length polyhdroxyalkanoates (MCL-PHAs)의 생분해도를 시럼실 조건에서 조사하였다. 생분애도는 평파내지에서의 clear zone 형성, 효소 처리에 의한 고분자 현탁액의 탁도 감소 및 호흡량의 경시적 변화로 측정하였다. Pseudomonas sp. RY-1은 MCL-PHA depolymerase의 생성을 통하여 조사된 모든 종류의 MCl-PHAs를 분해할 수 있었으나, 이 효소의 생성은 쉽게 이용될수 있는 이차기질에 의해 저해받는 것으로 나타났다. MCl-PHAs의 분해율이 단위체의 탄소수가 홀수개로 구성된 고분자에 비하여 보다 높았다. 곁가지에 분포화기를 함유한 MCl-PHAs는 불포화기를 갖지 아니하는 고분자에 비하여 분해가 빠르게 이루어졌으며, 이들의 분해는 고분자의 결정화도와 밀접한 관련이 있는 것으로 나타났다.

• 정보처리학회논문지C
• /
• 제11C권7호
• /
• pp.1009-1022
• /
• 2004

스무딩은 가변 비트율의 비디오 데이터를 고정 비트율로 변환하는 전송 계획이다. 이를 위한 스무딩 알고리즘에는 CBA, MCBA, MVBA, PCRTT, e-PCRTT등이 있으며, PCRTT 알고리즘을 개선한 e-PCRTT 알고리즘에서는 전송률 변화 횟수사 주어지고 런의 크기가 일정하다. 이는 불필요한 전송률의 변화를 필요로 하고, 또한 버퍼 크기가 작은 경우에는 QoS를 보장하지 못할 수 도 있다. 본 논문에서는 이러한 e-PCRTT 알고리즘의 단점을 해결하기 위해 전송률 변화 횟수에 대한 제한이 없고, 런의 크기가 가변적인 스무딩 알고리즘을 제안한다. 제안 알고리즘의 성능은 e-PCRTT 알고리즘을 포함한 다른 알고리즘들과 전송률 변화 횟수, QoS를 유지하기 위한 버퍼 크기 등과 같은 다양한 평가 요소들로 비교하여 우수함을 보였다.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.123-133
• /
• 2014

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine is of great economic importance. A motor-driven cylinder lubricator for Sulzer RT-flex large two-stroke diesel engines developed by authors is in need of improving the lubricating system to lubricate cylinder parts optimally by an electronically controlled quill device according to changes of engine load and revolution speed. In order to apply the developed accumulating distributor to an integrated cylinder lubricator by the electronically controlled system as the third research stage, the lubricating system is improved in the electronically controlled quill device with a solenoid valve. In this study, the effects of lubricator revolution speed, driving pressure(or plunger stroke) and cylinder back pressure on oil feed rate and lubrication inequality rate are investigated by using the integrated cylinder lubricator system with an accumulated distribution by the electronic control(I.C.S.), and the oil feed rate and lubrication inequality rate of I.C.S. are compared with those of the motor-driven cylinder lubricator by the electronically controlled quill system equipped with an accumulating distributor(E.D.S.). It is found that the oil feed rate of I.C.S. is smaller than that of E.D.S. due to the reduction of delivery velocity by the higher delivery pressure, and the variances of lubrication inequality rate for I.C.S. have become smaller than those of E.D.S. as the driving pressure in all experimental conditions increases, except for the driving pressure of 26 bar(plunger stroke 2 mm) at the cylinder lubricator speed of 120 rpm.