• 한국수소및신에너지학회논문집
• /
• 제19권1호
• /
• pp.41-48
• /
• 2008

Fermentative $H_2$ production was studied using microbial consortia isolated from heat-treated ($90{\circ}C$, 20 min) sewage sludge. Important parameters investigated were carbon(C) and nitrogen(N)-sources, C/N ratio, phosphate concentration, pH and temperature during anaerobic cultivation in serum bottles. Starch, ribose, sucrose and glucose were good C-sources for the culture growth and $H_2$ production. Yeast extract was better N-source than $(NH_4)_2SO_4$ or peptone when individually added to the synthetic media, however the combination of above three N-sources exhibited the additional effect for cell growth and $H_2$ evolution. Addition of 100 mM phosphate as a buffering agent prevented the rapid pH drop during the cultivation. The optimum initial pH for the cell growth was at 7.0, whereas $H_2$ production was observed at pH 5.5. Optimum temperature for the cell growth and $H_2$ production was $37{\circ}C$. Initial C/N ratio of 1.22 in the media using glucose and yeast extract as the C- and N-sources, respectively, showed the $H_2$ yield 1.0 mol $H_2$/mol glucose.

• 한국재료학회지
• /
• 제14권3호
• /
• pp.191-195
• /
• 2004

Tunnel junctions with AI-N barriers fabricated by microwave-excited plasma were studied. When the Al thickness, nitridation time, and annealing temperature were 1 nm (0.8 nm), 50 s (35 s), and $280^{\circ}C$ ($300^{\circ}C$), TMR ratio and resistance-area product (RA) were 49% (34%) and $3 ${\times}$ 10^4$ $\Omega$$\mu\m^2$ ($1.5 ${\times}$ 10^4$ $\Omega$$\mu\m^2$), respectively. In order to clarify the annealing temperature dependence of TMR ratio, the local transport properties were measured for Ta 5 nm/Cu 20 nm/Ta 5 nm$29_{76}$ $Fe_{24}$ 2 nm/Cu 5 nm/M $n_{75}$$Ir_{25}$ 10 nm/ $Co_{71}$ $Co_{29}$ 4nm/Al-N junction with Al thickness of 0.8 nm and nitridation time of 35s at various temperatures. The increase of TMR ratio after annealing at $300^{\circ}C$, where the TMR ratio of the corresponding MTJ had the maximum value of 34%, can be well explained by the enhancement of the average barrier height ($\Phi_{ave}$) and the reduction of its fluctuation. After further annealing at $340^{\circ}C$, the leakage current was observed and the TMR ratio decreaseded

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1228-1236
• /
• 2001

In this study, CT specimens were prepared from ASTH A5l6 steel which was used for pressure vessel plates for moderate and lower temperature service. And we got the fellowing characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$ , $-30^{\circ}C$, $-60^{\circ}C$, $-80^{\circ}C$, $-100^{\circ}C$ and $-120^{\circ}C$ and in the range of stress ratio of 0.1, 0.3 by means of opening mode displacement. At the constant stress ratio, the Threshold stress intensity factor range ΔAKth in the early stage of fatigue crack growth (Region I) and stress intensity factor range $\DeltaK$ in the stable of fatigue crack growth (Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN-$\Delta$K in Region II that is, the fatigue clack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• 한국재료학회지
• /
• 제29권10호
• /
• pp.579-585
• /
• 2019

In this study, we investigate the effect of Al/N source ratios and growth rates on the growth and structural properties of AlN films on c-plane sapphires by plasma-assisted molecular beam epitaxy. Both growth rates and Al/N ratios affect crystal qualities of AlN films. The full width at half maximum (FWHM) values of ($10{\bar{1}}5$) X-ray rocking curves (XRCs) change from 0.22 to $0.31^{\circ}$ with changing of the Al/N ratios, but the curves of (0002) XRCs change from 0.04 to $0.45^{\circ}$ with changing of the Al/N ratios. This means that structural deformation due to dislocations is slightly affected by the Al/N ratio in the ($10{\bar{1}}5$) XRCs but affected strongly for the (0002) XRCs. From the viewpoint of growth rate, the AlN films with high growth rate (HGR) show better crystal quality than the low growth rate (LGR) films overall, as shown by the FWHM values of the (0002) and ($10{\bar{1}}5$) XRCs. Based on cross-sectional transmission electron microscope observation, the HGR sample with an Al/N ratio of 3.1 shows more edge dislocations than there are screw and mixed dislocations in the LGR sample with Al/N ratio of 3.5.

• 한국농공학회지
• /
• 제34권3호
• /
• pp.75-84
• /
• 1992

The paper manufactories in Sangpyeong Industrial Estates, Chinju, produce more than 80 tons of paper-mill sludge cakes every day, which costs about 840 million won for dump per year. Since the paper-mill sludge is biodegradable, the sludge can he utilized as an organic fertilizer if it is properly decomposed. This may lead to not only dramatic cut of the treatment cost but prevention from secondary environmental contamination due to dump. The primary objective of the study was to explore the quantitative range of major enviromental parameters influencing early composting of paper-mill cakes, naturally pretreated in warn and cold weather. The automatically-controlled reactor was designed, manufactured, and operated for nine days to decompose about 2201 of raw sludge cakes. Four tests(Test 1-Test 4) were implemented for the study of Phase I. Treatments of two levels of initial temperature (40˚C and 28˚C) and two levels of water content + C/N ratio (35% + 40 and 63% + 80) were made to test the significance of their parameters for decomposition of raw sludge cakes pretreated in warm weather. Another four tests (Test 5- Test 8) were implemented for the study of Phase II. Treatments of initial temperature and water content(W/C) + C/N ratio of raw sludge pretreated in cold weather were made to 16˚C and 13% +58 for Test 5, 6˚C and 53% +55 for Test 6, 7˚C and 36% +81 for Test 7, 31˚C and 30% +81 for Test 8. Natural weater condition(pretreatment condition) revealed the importance m composting of the paper-mill sludge cakes. Combination of water content adjustment to about 30% with C/N ratio amendment of about 20 and initial temperature of 30~40˚C was concluded to be the best for early composting of paper-mill sludge cakes with aeration rate and pH fixed. Temperature and C/N ratio were adapted as judging variables for composting degree. In addition, tests for microbial activity were performed to validate the experimental results. Since the temperature and C/N ratio did not coincide in some tests as judging variables for the maturity of the composting sludges, taking one of these parameters could mislead the concept of the maturity (composting conceptually new criterion to provide more reliable information for early composting of paper-mill sludge cakes.

• 한국표면공학회지
• /
• 제15권3호
• /
• pp.138-145
• /
• 1982

The effects of the simultaneous variations of the ratio of feed gases(H2/N2 Flow ratio), feed gas flow rate (H2/N2, total-flow rate) and partial pressures of TiCl4 (PTiCl41) as well as deposition time and cobalt content of the substrate on the deposition rate of the TiN Coated Cemented Tungsten Carbide Tools were investigated. Deposition was carried out in the temperature range of 930$^{\circ}C$-1080$^{\circ}C$ and an activation energy of 46.5 Kcal/mole can be calculated. Transverse rupture strength was noticeably reduced by the TiN coating on the virgin surfa-ce of Cemented Tungsten Carbide, the extent of which was decreased according to the coa-ting thickness. Microhardness value observed on the work was in the range of 1700∼2000kg/mm, which were in well agreement with the value of bult TiN. The wear resistance of TiN layers was performed by turning test and it was observed that crater and flank resistance remarkably enhanced by TiN coating.

• 열처리공학회지
• /
• 제8권4호
• /
• pp.289-301
• /
• 1995

The effect of Air/$C_3H_8$ gas addition on the compound layer growth of steels nitrocarburised in $NH_3+Air+C_3H_8$ mixed gas atmospheres was investigated. It is considered that amount of residual $NH_3$ was varied according to alternation of Air/$C_3H_8$ mixing ratio and volume content. The compound layer formed from nitrocarburising was composed of ${\varepsilon}-Fe_{2-3}$(C, N) and ${\gamma}^{\prime}-Fe_4$(C, N). According as Air/$C_3H_8$ mixing ratio increased, the superficial content of ${\gamma}^{\prime}-Fe_4$(C, N) within the compound layer was increased, at the same time the growth rate of compound layer and porous layer was increased. In the case of alloy steel at the fixed gas composition, the growth rate of compound layer and porous layer was worse than carbon steel and compound layer phase composition structure primarily consisted of E phase. As the carbon content of materials was increasing in the given gas atmospheres, the growth rate of compound layer and porous layer was increased and the superficial content of ${\varepsilon}-Fe_{2-3}$(C, N) within the compound layer was increased.

• 한국산림과학회지
• /
• 제108권1호
• /
• pp.21-28
• /
• 2019

This study was conducted to determine the carbon (C) and nitrogen (N) response of litterfall components as affected by N addition in compound fertilizer in a Korean red pine (Pinus densiflora S. et Z.) stand in southern Korea. Litterfall in a mature red pine stand was collected for two years following compound fertilizer application ($N_3P_4K_1$; $P_4K_1$) and no fertilization (control). The C concentration of litterfall components was not significantly (P > 0.05) different between the $N_3P_4K_1$ and the control plots, whereas the N concentration of the litterfall components was significantly higher in the $N_3P_4K_1$ plot than in the control plot. The $N_3P_4K_1$ and $P_4K_1$ additions induced a lower C/N ratio of litterfall components compared with the control plot. Annual C and N fluxes via litterfall components were not affected by the $N_3P_4K_1$ addition over the study period, except for reproduction litter. Annual N fluxes via reproduction litter were significantly higher in the $N_3P_4K_1$ plot than in the control plot. Thus, the $N_3P_4K_1$ and $P_4K_1$ additions could modify differently nutrient distribution of the forest floor and mineral soils in a red pine stand. These results indicate that N concentration and C/N ratio in litterfall components are more susceptible to fertilizer application than the C response in litterfall components.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.70.1-70
• /
• 2003

• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1150-1154
• /
• 2001

플라즈마 화학기상증착(PECVD)법을 이용하여 실리카 광도파막의 코어로 이용되는 규소질산화막(SiON)을 Si 웨이퍼 위에 SiH$_4$,$N_2$O, $N_2$가스를 혼합하여 저온(32$0^{\circ}C$)에서 증착하였다. Prism coupler 측정을 통해 SiON 굴절률 1.4663~1.5496을 얻었으며, SiH$_4$/($N_2$O+$N_2$) 유량비와 rf power가 각각 0.33과 150W에서 8.67$mu extrm{m}$/h의 증착률을 나타내었다. 또한 SiH$_4$/($N_2$O+$N_2$) 유량비가 감소함에 따라 SiON막의 roughness는 41~6$\AA$까지 감소하였다.