• Journal of Korean Society on Water Environment
• /
• 제22권1호
• /
• pp.51-58
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for leather tanning and finishing industry. For the evaluation BAT, a subcategorization for the industry considering wastewater characteristics, source equipments, raw material and so on should be suggested. Three subcategories: A) Unharing, Chrome Tan, Retan-Wet Finish, B) Chrome Tan, Retan-Wet Finish, and C) Furskins were proposed in this study. Wastewater discharged from the each category contains high concentration of COD, chrome, nitrogen and sulfide. In particular, the concentration of nitrogen from the subcategory A is significantly greater. Twenty sites were surveyed and wastewater qualities were analyzed. Therefore, six different technologies were applied to the subcategory A for the end-of-pipe treatment technology, and a technology was used in the subcategory B and C, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options for each subcategories: A) primary chemical precipitation + modified Ludzack-Ettinger process (MLE) + secondary chemical precipitation, B) chemical precipitation + typical activated-sludge process + Fenton oxidation, C) chemical precipitation + typical activated-sludge process + batch Fenton oxidation or batch activated carbon treatment were selected as the BAT, respectively.

• Journal of the Korean Data and Information Science Society
• /
• 제24권4호
• /
• pp.847-856
• /
• 2013

In this paper, we deal with testing goodness-of-fit for normal distribution based on parametric and nonparametric entropy estimators. The minimum variance unbiased estimator for the entropy of the normal distribution is derived as a parametric entropy estimator to be used for the construction of a test statistic. For a nonparametric entropy estimator of a data-generating distribution under the alternative hypothesis sample entropy and its modifications are used. The critical values of the proposed tests are estimated by Monte Carlo simulations and presented in a tabular form. The performance of the proposed tests under some selected alternatives are investigated by means of simulations. The results report that the proposed tests have better power than the previous entropy-based test by Vasicek (1976). In applications, the new tests are expected to be used as a competitive tool for testing normality.

• Journal of Environmental Impact Assessment
• /
• 제22권4호
• /
• pp.319-327
• /
• 2013

This study was conducted to identify runoff characteristics of pollutants using flow duration curve(FDC) and load duration curve(LDC) in Youngbon A watershed during 2009~2011. A flow rate and pollutant load in the study watershed were estimated by equation of stage-discharge and discharge-loads rating curve. From these methods, BOD, T-N, and T-P have evaluated whether water quality standards would have attained. Results showed that BOD loads of about 50% plotted above the LDC, while T-N and T-P loads of about 50% plotted below the curve. It means that BOD of about 50% have exceeded the water quality criteria, while T-N and T-P of about 50% have complied with the water quality standards. Meanwhile, BOD, TN and T-P loads plotted above the LDC of low flows, implying that they were more affected by point pollution sources than nonpoint pollution sources in the study watershed.

• Journal of Korean Society on Water Environment
• /
• 제27권6호
• /
• pp.868-876
• /
• 2011

A five-year field monitoring was conducted to monitor characteristics of suspended solid (SS) export from paddy fields. The observed EMCs of SS ranged 1.2~517 mg/L (avg. 52.1 mg/L) during storm period. The concentration of SS during non-storm period were 1.1~349.5 mg/L (avg. 36.1 mg/L). Monthly load of SS was high during summer when rainfall amount was high. The load was higher than that of May when tillage effect is expected. There was no significant relationship between SS EMCs and rainfall or drainage amount. However, effects of rainfall and drainage were found to be significant for event load of SS. But, there was no apparent relationship between rainfall amount of cropping period and load of SS for that period. The observed SS load was 164.8~456.0 kg/ha (avg. 301.2 kg/ha) and mostly occurred during storm period. This study results also suggested that SS load estimation by USLE equation for paddy field could be overestimated, if not carefully handled. Monitoring studies for various climate, soil, and agricultural management are required to get better scope of SS export from paddy fields.

• Journal of the Korea Society of Computer and Information
• /
• 제29권6호
• /
• pp.113-120
• /
• 2024

With the advancement of information and communication technology, we can easily generate various forms of data in our daily lives. To efficiently manage such a large amount of data, systematic classification into categories is essential. For effective search and navigation, data is organized into a tree-like hierarchical structure known as a category tree, which is commonly seen in news websites and Wikipedia. As a result, various techniques have been proposed to classify large volumes of documents into the terminal nodes of category trees. However, document classification methods using category trees face a problem: as the height of the tree increases, the number of terminal nodes multiplies exponentially, which increases the probability of misclassification and ultimately leads to a reduction in classification accuracy. Therefore, in this paper, we propose a new node expansion-based classification algorithm that satisfies the classification accuracy required by the application, while enabling detailed categorization. The proposed method uses a greedy approach to prioritize the expansion of nodes with high classification accuracy, thereby maximizing the overall classification accuracy of the category tree. Experimental results on real data show that the proposed technique provides improved performance over naive methods.

• Journal of Environmental Impact Assessment
• /
• 제22권2호
• /
• pp.171-181
• /
• 2013

In this study, we report the water quality characteristics of pollutants for 4 major tributaries in the Yeongsan and Sumjin river basins using statistical analysis, such as regression equation and factor analysis. The flow rate and water qualtiy data collected from 4 sampling sites(Hwangryoung A, Jiseok A, Chooryeong A, Osu A) in the Yeonsan and Sumjin river basin during the past 3 years were analyzed for 11 parameters(flow rate, dissolved oxgen, pH, water temperature, electric conductivity, biochemical oxygen demand, chemical oxygen deman, total organic carbon, total nitorgen, total phosphorus, suspended solid). The results showed that the concentrations of BOD, COD, TOC, T-N, T-P in Hwangryoung A(HW) and Jiseok A(JS) of the Yeongsan river basin were decreased as the flow rate was increased. This means that rather than nonpoint soources, point sources affect water quality. In the cases of Chooryeong A(CR) and Osu A(OS) in the Sumjin river basin, howerever, nonpoint sources than point sources are an important factor that affects the water quality. Also, the factor analysis technique was employed to analyze principal component influencing on water quality. The results revealed that the first principal component in HW was correlated with EC, DO, T-N, water temperature. This "nitrogen influx according to seasonal pattern" factor may be interpreted. In JS, the first principal component was correlated with BOD, COD, TOC and is likely to represent "organic matter" processes. In CR and OS, BOD, COD, TOC, SS and T-P were significantly correlated and is considered as representing "Organic matter and adsorption of phosphorus on sediments influx". This study is expected to contribute to the effective pollution control/management of the surfac waters in the study sites.

• Korean Journal of Construction Engineering and Management
• /
• 제18권4호
• /
• pp.57-66
• /
• 2017

Using bidding data collected from the World Bank's open database, this research performed a series of competitive analyses of the major countries that have participated in the Bank's engineering consulting services contracts in Vietnam. The goal of the analysis was to evaluate the performance of Korean engineering firms to date, and provide strategic recommendations for future projects. Results showed that Korean firms had a high bid acceptance rate, comparable to major developed countries. The success was attributed to the high technical scores in the selection process. Comparatively, financial scores were not competitive and inferior to developing countries such as China and India. Results of a 'Skitmore' analysis revealed that Korea was competitive in medium size projects and were situated between developed and developing countries. Korea thus needs to increase participation in basic and detailed design services, 2) improve labor costs through 'localization' and latest technologies, and 3) and venture into larger sized projects.

• Korean Journal of Construction Engineering and Management
• /
• 제18권6호
• /
• pp.78-88
• /
• 2017

With the growing use of BIM in the AEC industry, various new applications are being developed to meet these specific needs. Such developments have increased the importance of Industry Foundation Classes, which is the international standard for sharing BIM data and thus ensuring interoperability. However, mapping individual BIM objects to IFC entities is still a manual task, and is a main cause for errors or omissions during data transfers. This research focused on addressing this issue by applying novelty detection, which is a technique for detecting anomalies in data. By training the algorithm to learn the geometry of IFC entities, misclassifications (i.e., outliers) can be detected automatically. Two IFC classes (ifcWall, ifcDoor) were trained using objects from three BIM models. The results showed that the algorithm was able to correctly identify 141 of 160 outliers. Novelty detection is thus suggested as a competent solution to resolve the mapping issue, mainly due to its ability to create multiple inlier boundaries and ex ante training of element geometry.

• Korean Journal of Construction Engineering and Management
• /
• 제16권5호
• /
• pp.77-85
• /
• 2015

The Hedonic Pricing model is the predominant approach used today to model the effect of relevant factors on real estate prices. These factors include intrinsic elements of a property such as floor areas, number of rooms, and parking spaces. Also, The model also accounts for the impact of amenities or undesirable facilities of a property's value. In the latter case, euclidean distances are typically used as the parameter to represent the proximity and its impact on prices. However, in situations where multiple facilities exist, multi-colinearity may exist between these parameters, which can result in multi-regression models with erroneous coefficients. This research uses Variance Inflation Factors(VIF) and Ridge Regression to identify these errors and thus create more accurate and stable models. The techniques were applied to apartments in Guro-gu of Seoul, whose prices are impacted by subway stations as well as a public prison, a railway terminal and a digital complex. The VIF identified colinearity between variables representing the terminal and the digital complex as well as the latitudinal coordinates. The ridge regression showed the need to remove two of these variables. The case study demonstrated that the application of these techniques were critical in developing accurate and robust Hedonic Pricing models.

• Clean Technology
• /
• 제23권3호
• /
• pp.270-278
• /
• 2017

This study introduces a method to easily fabricate highly monodisperse pectin hydrogel microfibers in a microfluidic device by using partial gelation. The hydrodynamic parameters between the pectin aqueous solution and the calcium ions containing oil solution are precisely controlled to form a stable elongation flow of the pectin aqueous solution, and partial gelation of the pectin aqueous solution is performed by the chelating of the calcium ions at the interface between the two phases. The partially gelled pectin aqueous solution is phase-separated from the oil solution in an aqueous calcium chloride solution outside the microfluidic device and is completely gelled to produce monodisperse pectin hydrogel microfibers. The thickness of the pectin hydrogel microfiber is controlled in a reproducible manner by controlling the volumetric flow rate of the initially injected pectin aqueous solution. The pectin hydrogel microfibers were 200 to 500 micrometers in diameter and had a coefficient of variation below 5% under all thickness conditions, indicating that the pectin hydrogel microfibers produced by partial gelation are highly monodisperse. In addition, biomaterials can be immobilized to the pectin hydrogel microfibers produced by a single process, demonstrating the possibility that our pectin hydrogel microfiber can be used as carriers for biomaterials or tissue engineering.