• Journal of Welding and Joining
• /
• v.31 no.5
• /
• pp.26-34
• /
• 2013

Boiler equipment in power plant is always being operated in harsh conditions and severely exposed to the extreme environment of high temperature. Therefore periodically the state of devices should be checked, diagnosed, and analyzed to ensure the reliability of the equipment. Traditionally, such a diagnosis is based one or two physical properties of the sample taken from the equipment like hardness, microstructure, etc.. However, to enhance the confidence of the diagnosis, it is necessary to synthesize those properties together. This paper is to propose such a synthetic procedure for T23 which was developed to be used in $569^{\circ}C/596^{\circ}C$ condition. Creep test and accelerated degradation test were performed simultaneously, and the physical properties such as microstructure, tensile strength, yield strength, hardness, and indentation properties were measured. This paper proposes a method of determining the remaining life by quantitative comparison. It will provide the basis of evaluating life assessment more objective and reliable.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.2
• /
• pp.222-231
• /
• 2016

This paper proposes a new method achieving computationally efficient attitude reference system for low cost strapdown sensors and microprocessor platform. The main idea in this method is to define and compare velocity differential vectors, geometrically computed from INS and GPS data with different update rate, for generating attitude error measurements which is further used for filter construction. A quaternion based Kalman filter configuration is applied for the attitude estimation with the adapted measurement model of differential vector comparison. Linearized model for Extended Kalman Filter and low pass filtered characteristics of measurement greatly extend the affordability of the proposed algorithm to the field of simple low cost embedded systems. For performance verification, experiment are done employing a practical low cost MEMS IMU and GPS receiver specification. Performance comparison with a high grade navigation system demonstrated good estimation result.

• Ceramist
• /
• v.22 no.1
• /
• pp.36-55
• /
• 2019

Atomically thin two-dimensional (2D) nanomaterials, including transition metal dichalcogenides (TMDs), graphene, boron nitride, and black phosphorus, have opened up new opportunities for the next generation optoelectronics owing to their unique properties such as high absorbance coefficient, high carrier mobility, tunable band gap, strong light-matter interaction, and flexibility. In this review, photodetectors based on 2D nanomaterials are classified with respect to critical element technology (e.g., active channel, contact, interface, and passivation). We discuss key ideas for improving the performance of the 2D photodetectors. In addition, figure-of-merits (responsivity, detectivity, response speed, and wavelength spectrum range) are compared to evaluate the performance of diverse 2D photodetectors. In order to achieve highly reliable 2D photodetectors, in-depth studies on material synthesis, device structure, and integration process are still essential. We hope that this review article is able to render the inspiration for the breakthrough of the 2D photodetector research field.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.59-65
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for petrochemical basic compound manufacturing (PBCM) and plastics and synthetic resins manufacturing (PSRM) industry. Wastewater discharged from the each category contains high concentration of COD and toluene. Eighteen sites were surveyed and wastewater qualities were analyzed. Six and two different technologies were applied to the PBCM and PSRM industry for the end-of-pipe treatment process, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options: typical activated-sludge process + sand filtration + activated carbon adsorption (PBCM) and wet oxidation + chemical precipitation + typical activated-sludge process + chemical precipitation (PSRM) were selected as the BAT for each industry.

• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.657-662
• /
• 2012

This study was carried out to evaluate the removal rate of organic and inorganic matters from landfill leachate using pre-treatment process as coagulation and limonite adsorption, and membrane process as RO (reverse osmosis) and NF(nanofiltration). By adding limonite adsorption as pre-treatment process, about 40% of organic matters in leachate was removed through pre-treatment process and 74.7% of boron was removed after RO process without pH adjustment. The rejection rate of boron in RO process mainly depends on the pH and increased at pH value of 10. RO process was performed as two stage system adjusting pH condtion to 7 and 10 in second RO stage for boron removal. Most (>90%) of TOC, Cl- and inorganic matters as Ca was rejected in first RO stage, the residue was rejected in second RO and the rejection rate was above 97%. Considering economic efficiency of operation cost, NF substituted for the first RO and total removal rate of TOC was above 90%. Through RO system toxicity to Daphnia in leachate was removed completely.

• Food Science of Animal Resources
• /
• v.25 no.1
• /
• pp.60-65
• /
• 2005

Antioxidant films are one active packaging technology that can extend food shelf-life through preventing lipid oxidation, stabilizing color, maintaining sensory properties and delaying microbial growth in foods. Because raw, fresh and minimal processed foods are more perishable during storage or under display conditions than further processed foods, they rapidly lose their original quality. Foods are susceptible to physical, chemical, and biochemical hazards to which packaging films can be effective barriers. Although films incorporated natural (tocopherols, flavonoids and phenolic acids) or synthetic antioxidants (BHT, BHA, TBHQ, propyl gallate) have been extensively tested to improve quality and safety of various foods, food applications require addressing issues such as physical properties, chemical action, cost, and legal approval. Increased interest in natural antioxidants as substitutes for synthetic antioxidants has triggered research on use of the new natural antioxidants in films and coatings. Use of new components (phytochemicals) as film additives can improve food quality and human health. The biosynthesis of plant phenolics can potentially be optimized by active coatings on harvested fruits and vegetables. These coatings can trigger the plants natural proline-linked pentose phosphate pathway to increase the phenolic contents and maintain overall plant tissue quality. This alternate metabolic pathway has been proposed by Dr. K. Shetty and is supported by numerous studies. A new generation of active food films will not only preserve the food, but increase food's nutritional quality by optimizing raw food biochemical production of phytochemicals.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.3
• /
• pp.332-340
• /
• 2019

Electronic warfare systems are needed to be advantageous in the modern war. Many radar threat signals with various frequency spectrums and complicated techniques exist. For detecting the threats, a receiver with wide and narrow-band digital processing is needed. To process a wide-band searching mode, a polyphase filter bank has become the architecture of choice to efficiently detect threats. A polyphase N-path filter aligns the re-sampled time series in each path, and a discrete Fourier transform aligns phase and separates the sub-channel baseband aliases. Multiple threats and CW are detected or rejected when the signals are received in different sub-channels. And also, to process a narrow-band precision mode, a direct down converter is needed to reduce aliasing by using a decimation filter. These digital logics are designed in a FPGA. This paper shows how to design and develop a wide and narrow-band digital receiver that is capable to detect the threats.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.6
• /
• pp.24-30
• /
• 2016

Building Information Modeling, and its associated work practices, requires project participants to share not only 3D geometric data, but also information in the model that may be considered proprietary and even trade secrets. Thus protection of intellectual property, or BIM copyrights, must be in place for participants to share proprietary information among project stakeholders. Currently Korea does not have adequate copyright laws or mechanisms to provide such protection. This research examined three BIM copyright legal documents, namely U.S.' ConsensusDOCS 301, AIA Document E203/G202, and U.K.'s CIC BIM Protocol to determine how copyright protection is realized, and to formulate appropriate stipulations within the Korean construction context. The resultant requirements include stipulating ownership at to the BIM originator, adopting a license-sublicense scheme, employing a federated model, and use of a formal model delivey table to allocate responsibilities. Given Korea's adoption stage, liability should be minimal, and license revocation should be allowed if payments are not met. The three BIM legal documents focus on practical measures that allow participants to customize requirements for individual projects, and such conventions should be emulated in Korea.

• Journal of Korean Society on Water Environment
• /
• v.28 no.4
• /
• pp.595-600
• /
• 2012

This study is to assess the application of SWAT-CUP(Soil and Water Assessment Tool-Calibration Uncertainty Programs) and to extend daily flow data from 8-day interval flow data which has been measured by Korean Ministry of Environment(MOE). Model sensitivity analysis and calibration were performed with sequential uncertainty fitting(SUIF-2), which is one of the programs interfaced with SWAT, in the package SWAT-CUP. The most sensitive parameters were SOL_K.sol, CH_N2.rte, CN2.mgt, SOL_BD.sol, ALPHA_BF.gw, ALPHA_BNK.rte, SOL_AWC.sol, CH_K2.rte, SFTMP.bsn, GW_DELAY.gw. Following the sensitivity analysis, SWAT-CUP calibration was carried out using 8-day interval flow data from January 2008 to December 2010. The results were then assessed based on the visual agreement and simulated flow plots and the performance statistics generated $R^2$ and NSE which are 0.71 and 0.61 respectively. Results of these statistics indicated that there was a good agreement between the observed and simulated flow. To extend daily flow data from 8-day interval flow data, parameters, which were estimated by SWAT-CUP, re-entered for SWAT model. As a result, the observed flow data were found to reflect the trend of simulated flow data. From these results, it is thought that this method could be used to provide daily flow data using 8-day interval flow data.

• Journal of Korean Society on Water Environment
• /
• v.26 no.6
• /
• pp.943-947
• /
• 2010

Runoff ratio of paddy fields for the application of Event Mean Concentration (EMC) method was studied. To measure actual runoff ratio of paddy fields, a field monitoring was conducted for 2008 ~ 2009 period. Long-term rainfall data of four cities in major river basins were analyzed and weighting factors were developed to consider temporal and spatial variation of rainfall distribution of Korean peninsula. The observed runoff ratio ranged 0.00 ~ 1.20 and arithmetic mean were 0.25, respectively. However, the representative runoff ratio for paddy fields was determined as 0.41 according to the method suggested by National Institute of Environmental Research (NIER).