• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.105-112
• /
• 2005

This study aims at evaluating the environmental impacts stemmed from the End-of-Life Vehicle(ELV) treatment systems in Korea, using Life Cycle Assessment(LCA) method. In this study, both environmental burden from the ELV dismantling process & recycling processes and environmental benefit which were derived from the avoided environmental impacts by substituting recycled materials for virgin materials were considered. First of all, the key issues which were defined as the environmental aspects that account for more than $1\%$ out of the total environmental impacts were identified from the Life Cycle Impact Assessment(LCIA). $CO_2$, crude oil, natural gas, coal, etc. were found out to be the key issue parameters. From the LCI Analysis and LCIA studies, it was shown that the significant environmental aspects were related with the recycling process of ferro scrap, the shredding process of compressed car bodies and the dismantling process of end-of-life engines. In particular, the recycling process of ferro scrap has the most significant effects on the environmental impacts of the ELV treatment systems. Based on these results, it is recommended to improve the recycling process of ferro scrap in order to make the ELV treatment systems more environmentally sound.

• Korean Journal of Metals and Materials
• /
• v.48 no.5
• /
• pp.469-475
• /
• 2010

In this study, the interfacial bond strength of a squeeze infiltrated $Al_{18}B_{4}O_{33}$/AS52 Mg composite was investigated by using a finite element method. Three types of Mg composites with volume fractions of 15, 25 and 35% were fabricated. Three-dimensional models of the composite were developed by using a unit cell model in order to determine the effective elastic modulus of the metal matrix composite and the interfacial bond strength between the whisker and magnesium matrix. After modeling, numerical results were compared with the experimental tensile test results of $Al_{18}B_{4}O_{33}$/AS52 Mg composites. The results showed that the effective modulus of the composite strongly depended on the interfacial strength between the matrix and reinforcement. Based on the numerical and experimental findings, it was found that the strong interfacial bond was achieved by the interfacial reaction product of 30 nm thick MgO, which led to an improvement in the mechanical properties of the $Al_{18}B_{4}O_{33}$/AS52 Mg composites.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.6
• /
• pp.1112-1119
• /
• 2017

The aim of this study was to develop a potential process for bioethanol production from Hydrodictyon reticulatum (HR), a filamentous freshwater alga, using Saccharomyces cerevisiae (KCTC7017). From the sugar solutions prepared by the four different hydrolysis methods, bioethanol production ranged from 11.0 g/100 g dried material (acid hydrolysis) to 22.3 g/100 g dried material (enzymatic hydrolysis, EH). Bioethanol was fermented from a highly concentrated sugar solution obtained by a decompression-mediated (vacuum) enrichment method (VE). As the results, ethanol was more efficiently produced from HR when sugar solutions were concentrated by VE following EH (EH/VE). Using multiple feeding of the sugar solution prepared by EH/VE from HR, ethanol reached up to a concentration of 54.3 g/l, corresponding to 24.9 g/100 g dried material, which attained the economic level of product concentration (approximately 5%). The results indicate that by using HR, it is feasible to establish a bioethanol production process, which is effective for using microalgae as the raw material for ethanol production.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.1 s.51
• /
• pp.1-6
• /
• 2007

Hectorite was synthesized by a two-step hydrothermal process from $Mg(OH)_{2}$, water glass (${\sim}30\;wt%\;SiO_{2}$) and Li-compound at $90{\pm}5^{\circ}C$. The product shows excellent dispersion and swelling properties. The mixture of the starting materials was heated in a glass vessel for the first reaction with continuous stirring and the pH of the solution was adjusted to $6{\sim}8$, resulting in the formation of a precursor of hectorite. The excess salt components were washed out from the resulting slurry and then was matured in the glass vessel for the 2nd reaction. Li compound was added during the reaction. After a 10 h retention, the gel of hectorite was formed. The XRD pattern of the synthesized one was coincided with that of natural hectorite and SEM study revealed uniform grains 50 m in diameter. The d001 basal spacing of the product moved from 12 to $17.4\;{\AA}$ after glycolation treatment. The measured value of CEC and the swelling capacity was 90 cmol/kg and $60{\sim}70\;mL/2\;g$, respectively.

• Advances in concrete construction
• /
• v.9 no.6
• /
• pp.589-596
• /
• 2020

In an effort to find alternate, environment friendly and sustainable building materials, the scope of possible utilization of iron slag (I-sand), generated as a by-product in iron and steel industries, as fine aggregates in reinforced cement concrete (RCC) made with manufactured sand (M-sand) is examined in this manuscript. Systematic investigations of the physical, mechanical, microstructural and durability properties of I-sand in comparison with RCC made with M-sand have been carried out on various mix designs prepared by the partial/full replacement of I-sand in M-sand. The experimental results clearly indicate the possibility of utilizing iron slag for preparing RCC in constructions without compromising on the property of concrete, durability and performance. This provides an alternate possibility for the effective utilization of industrial waste, which is normally disposed by delivering to landfills, in building materials which can reduce the adverse environmental effects caused by indiscriminate sand mining being carried out to meet the growing demands from construction industry and also provide an economically viable alternative by reducing the cost of concrete production.

• Journal of Powder Materials
• /
• v.30 no.1
• /
• pp.1-6
• /
• 2023

High-entropy alloys (HEAs) are attracting attention because of their excellent properties and functions; however, they are relatively expensive compared with commercial alloys. Therefore, various efforts have been made to reduce the cost of raw materials. In this study, MIM is attempted using coarse equiatomic CoCrFeMnNi HEA powders. The mixing ratio (powder:binder) for HEA feedstock preparation is explored using torque rheometer. The block-shaped green parts are fabricated through a metal injection molding process using feedstock. The thermal debinding conditions are explored by thermogravimetric analysis, and solvent and thermal debinding are performed. It is densified under various sintering conditions considering the melting point of the HEA. The final product, which contains a small amount of non-FCC phase, is manufactured at a sintering temperature of 1250℃.

• Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.48-53
• /
• 2002

The HACCP (hazard analysis critical control point) concept becomes an important aspect of Good Manufacturing Practices (GMP) in safe food production. The HACCP plan was developed with food safety objective. The authors already carried out hazards analysis on Changran Jeotgal manufacturing process in a previous report. In this study we developed a HACCP plan on the manufacturing process of Changran Jeotgal. We could decide two CCPs those were salt concentration and eliminations of foreign materials before packaging. Foreign materials should be certainly checked out with laser detector just before packaging. Salt should be maintained more than $8\%$ to inhibit pathogenic bacteria in end product. On the Jeotgal process free water is removed after salting and Jeotgal is seasoned with several subsidiary materials such as com syrup. In result end products have $8\%$ salt with water activity 0.82. Most bacteria are inhibited but some can live in this condition. Materials on the working may be contaminate by pathogens, chemicals or physical hazards. It will be decreased by SSOP (standard sanitary operating program). The SSOP needed in Jeotgal plants is nearly same as other general food manufacturing plants but essential to fulfill HACCP program.

• Journal of the Korea Furniture Society
• /
• v.20 no.1
• /
• pp.82-94
• /
• 2009

In this study, I suggest dyed-Glued laminated woods by using birch woods which are relatively cheaper than others. Since the dyed-Glued laminated woods which have the various colors to satisfy people's tastes and the dignified grains in the old woods enable us to product freely, these can provide us with stability of supply through replacing rare materials. The making wooden furniture designed with dyed-Glued laminated woods has these following characteristics. (1) This method which uses various colored woods can fulfill consumers' tastes through dyeing wooden plates, instead of using domestic woods which have limited colors-white, yellow and black. (2) Gathering wooden plates made by setting them into various frames enables us to get in large quantities of the materials with good grains, which we can only take from old woods. (3) Producing culture products using various colors and grains has enabled us to satisfy consumers and to create pro-environmental pieces. In conclusion, this study can be an alternative idea to forest resources which have been decreasing, and be an application method of using cheaper birch woods as well. Gathering and dyeing wooden plates might bring about the economic effect and be of much help to the expansion as furniture materials as well as interior ones.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.3
• /
• pp.50-58
• /
• 2005

It is generally known that paper industry is the second largest industry in the use of process water, and also have the highest environmental impact load in the contaminant sources. Paper is produced from the mixtures composed of 1% fibrous raw materials and 99% water. The optimum use of process water effects on the quality properties of paper and the environmental impact load of waste water treatment. In this research, the kinds of fibrous raw material & additives used in the paperboard production line were investigated, and the quantification of environmental loads and the environmental effects of process water on COD potential were evaluated. The NBDCODs were also analyzed from process water by the method of waste water treatment in paper mill and applied for the optimum use of recycling water, and zero effluent process. In the fibrous raw materials, KOCC caused the highest COD potentials, and sack paper & UKP was comparatively low. The NBDCOD of KOCC largely reduced after biological treatment because of easily biodegradable properties, but AOCC contained non-biodegradable materials. In chemical additives, COD was high in turns of rosin>starch>deaeration agent>dye, NBDCOD greatly reduced in starch and deaeration agent. In the case of 2 kinds of paperboard product, the COD potentials was mainly high in starch, AOCC and KOCC.

• Korean Journal of Materials Research
• /
• v.26 no.10
• /
• pp.542-548
• /
• 2016

The influence of NiCrAlY bond coating on the adhesion properties of an Fe thermal coating sprayed on an Al substrate was investigated. By applying a bond coat, an adhesion strength of 21MPa was obtained, which was higher than the 15.5MPa strength of the coating without the bond coat. Formation of cracks at the interface of the bond coat and the Al substrate was suppressed by applying the bond coat. Microstructural analysis of the coating interface using EBSD and TEM indicated that the dominant bonding mechanism was mechanical interlocking. Mechanical interlocking without crack defects in the coating interface may improve the adhesion strength of the coating. In conclusion, the use of an NiCrAlY bond coat is an effective method of improving the adhesion properties of thermal sprayed Fe coatings on Al substrates.