• Journal of the Korean Society of Fashion and Beauty
• /
• v.1 no.1 s.1
• /
• pp.79-94
• /
• 2003

The purpose of this study was to discuss how make-up materials were used for the design techniques of special make-up that is part of impersonation, what kinds of materials were applied to special make-up design and how they were utilized, in a bid to find out more materials available for each of diverse design techniques in pursuit of better make-up design. The most widely used materials were divided into transformational and supplementary types, and the focus of this study was placed on two different design techniques. One put transformational materials to use, and the other utilized supplementary materials that also could serve as alternative and effect materials. Unlike general make-up that pursues beauty, special make-up focuses on realistic effect, and it cannot make any progress without newer, diverse materials which are increasingly gaining in importance. Although special make-up designing is a skilled technique that requires systematic knowledge of theories, proper materials and repeated practice, there is no absolute standard for it, since it is a product of imagination and depends on delicate hand skills and its effect hinges on individual viewer's visual perspective. In the future, more comprehensive and broader-scale experiments are called for to tackle this problem.

• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.128-132
• /
• 2004

Short wave infrared (SWIR) photovoltaic devices have been fabricated from metal organic vapour phase epitaxy (MOVPE) grown n- on p- HgCdTe films on GaAs substrates. The MOVPE grown films were processed into mesa type discrete devices with wet chemical etching employed for meas delineation and ZnS surface passivatlon. ZnS was thermally evaporated from effusion cell in an ultra high vacuum (UHV) chamber. The main features of the ZnS deposited from effusion cell in UHV chamber are low fixed surface charge density, and small hysteresis. It was found that a negative flat band voltage with -0.6 V has been obtained for Metal Insulator Semiconductor (MIS) capacitor which was evaporated at $910^{\circ}C$ for 90 min. Current-Voltage (I-V) and temperature dependence of the I-V characteristics were measured in the temperature range 80 - 300 K. The Zero bias dynamic resistance-area product ($R_{0}A$) was about $7500{\Omega}-cm^{2}$ at room temperature. The physical mechanisms that dominate dark current properties in the HgCdTe photodiodes are examined by the dependence of the $R_{0}A$ product upon reciprocal temperature. From theoretical considerations and known current expressions for thermal and tunnelling process, the device is shown to be diffusion limited up to 180 K and g-r limited at temperature below this.

• Journal of Fashion Business
• /
• v.23 no.6
• /
• pp.86-100
• /
• 2019

This study analyzed the characteristics of vegan fashion produced by H&M and ZARA with respect to materials, design, development, production, and marketing to create social value. The results of this study are significant because they can be used as a reference to develop a vegan fashion market. Regarding the research method, this study assessed the concept and status of veganism through a literature review and examined vegan fashion case studies by analyzing official websites and media content. The study's scope covers the period from 2005, when H&M was the first SPA brand to create a vegan product line, until 2019. The characteristics of Global SPA's vegan fashion were as follows. Regarding materials, alternative materials were developed and an expanded use of organic materials was implemented. Regarding design, development was achieved through design collaboration and upcycling. In terms of production, an animal welfare policy was adopted and a sustainable supply chain was established. Marketing employed a campaign aimed at encouraging increased consumer participation. The findings regarding the social value of H&M and Zara's vegan fashion were as follows. First, a cyclical economy was realized through circular recycling in the entire process of resource selection, production, and waste disposal. Second, because product consumption indicated the importance of ethical consumption and sustainable consumer participation, corporate financial activities were created based on shared values to accomplish the social outcome. Third, collaborations with luxury brands or vegan fashion designers built a collaborative ecosystem in which vegan fashions were released and consumer participation campaigns were implemented.

• Korean Journal of Metals and Materials
• /
• v.49 no.1
• /
• pp.85-91
• /
• 2011

Alnico magnets can be used as magnetic bearings for the precise electric power measuring instruments such as watt-hour meters because they have high remanence ($B_r$), relatively high maximum energy product ($(BH)_{max}$), and excellent temperature stability. In this study, Alnico composite magnets were fabricated by appropriately mixing alnico alloy powders with epoxy resin and binder. The Alnico powders mixed with epoxy resin and a hardening agent with a mixing ratio of 96:4 were pressed and then cured to be a toroid-type ring magnet with an outer diameter (${\Phi}_{out}$) of 15 mm, an inner diameter (${\Phi}_{in}$) of 6.5 mm and a thickness (t) of 2.5 mm, respectively. The magnetic properties of the Alnico ring magnets were varied with the mixing ratio of Alnico powders that possess different average particle sizes. The Alnico ring magnet prepared by mixing 5 wt% of $50{\mu}m$ (small size) powder, 15~20 wt% of $150{\mu}m$ (medium size) powder, and 75~80 wt% of $300{\mu}m$ (large size) powder showed the best magnetic properties (remanent induction, coercive force, maximum energy product, and surface flux density). In addition, measurements of temperature and moisture characteristics for the Alnico ring magnets showed that the surface flux densities of the N and S poles decreased little and the repulsive distance between the magnets decreased as small as 0.05 mm after 10 days.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.9-15
• /
• 2017

This study represents basic research for the development of submerged pump technology applicable to transfer and storage of a cryogenic liquids. Its purpose is to secure baseline design data by applying reverse engineering to the process of developing a submerged cryogenic pump. The two-stage model included in the ARTICK Series LNG Submerged Pump produced by Vanzetti of Italy was selected for analysis for development of a localized product, and was disassembled for reverse engineering. The pump was disassembled after analyzing its processing/assembly characteristics such as shrinkage of fittings. In addition, the materials used in manufacturing of the main components were analyzed, and the ingredients were confirmed. As a result, a design drawing for each component required for product development was secured via foundational design, and a test product was manufactured by maximizing the application of appropriate domestic technologies.

• Journal of the Korean Home Economics Association
• /
• v.42 no.8
• /
• pp.49-64
• /
• 2004

The purpose of this study was to provide useful information which would help web-site planning and design, product composition, and service of internet shopping malls. The sample consisted of 693 university students who had visited(Ed- in this case 'visit' means to enter an internet site; note also that the past perfect tense already conveys the meaning of 'experience') internet fashion shopping malls or purchased clothing through internet. Data were analyzed by factor analysis, frequency, t-test, and ANOVA(LSD) using SPSSWIN. The results were as follows： 1) The evaluative criteria of internet fashion shopping malls could be categorized by 4 factors： product presentation method, design, product information, sales promotion ＆ additional service; the first of which was found to be the most important. These criteria showed significant differences according to the period and time of access. Furthermore, the degree of consideration for these criteria was high, whereas the degree of satisfaction was low. 2) The evaluative criteria of clothing could be categorized by 6 factors： general characteristics of products, wearing comfort ＆ ease of management, popularity ＆ status symbolism, service, aesthetics, and textiles materials; the first of which was found to be the most important. These criteria were significantly different according to the periods, time, and purposes of access, and purchase experiences.

• Transactions of Materials Processing
• /
• v.4 no.3
• /
• pp.214-221
• /
• 1995

In the paper, we have proposed a new method to determine the initial billet for the forged products using a function approximation in the neural network. The architecture of neural network is a three-layer neural network and the back propagation algorithm is employed to train the network. By utilizing the ability of function approximation of a neural network, an optimal billet is determined by applying the nonlinear mathematical relationship between the aspect ratios in the initial billet and the final products. The amount of incomplete filling in the die is measured by the rigid-plastic finite element method. The neural network is trained with the initial billet aspect ratios and those of the unfilled volumes. After learning, the system is able to predict the filling regions which are exactly the same or slightly different to the results of finite element simulation. This new method is applied to find the optimal billet size for the plane strain rib-web product in cold forging. This would reduce the number of finite element simulation for determining the optimal billet size of forging product, further it is usefully adapted to physical modeling for the forging design.

• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.600-606
• /
• 2008

In closed-die hot forging, a billet is formed in dies such that the flow of metal from the die cavity is restricted. Some parts can be forged in a single set of dies, whilst others, due to shape complexity and material flow limitations, must be shaped in multi sets of dies. The purpose of a performing operation is to distribute the volume of the parts such that material flow in the finisher dies will be sound. This study focused on the design of preforms, flash thickness and land width by theoretical calculation and finite element analysis, to manufacture the super hot forging product, 70MC type piston crown used in marine engine. The optimal design of preforms by the finite element analysis and the design experiment achieves adequate metal distribution without any defects and guarantees the minimum forming load and fully filling of the cavity of the die for producing the large piston crown. The maximum loads obtained by finite element analysis are compared with the results of experiments. The loads of the analysis have good agreements with those of the experiment. Results obtained using DEFORM-2D enable the designer and manufacturer of super hot forging dies to be more efficient in this field.

• Management & Information Systems Review
• /
• v.4
• /
• pp.557-572
• /
• 2000

Nowadays, after beginning of 21 centuries, owing to simplify market, the world is in the era of an influx of new paradigm that requires infinite competition. The manufacturing industries of Korea are in need of casting off high cost and low efficiency structure. The forfeiture of competition is resulted from the lost of level in quality of product. Today, the achievement of competitive product quality is coming from the following factors, that is., quality control, quality of service, marketing, human resources, finance, etc., together with process management. While Six Sigma, a newly introduced method to achieve process qualify outcome by sector of enterprise, is now being enjoyed a high reputation as a key device for competition by superiority enterprises in the United States, it has not been introduced sufficiently in the domestic enterprises yet. In our research, we, first of all, organized systematically the materials being released up to now. Furthermore, we looked over case studies of the American enterprises that apply Six Sigma strategy very successfully. Finally, we discussed the situation of domestic enterprises which are about to importing Six Sigma strategy as well as main causation of success by adopting it. While the enterprises approach Six Sigma strategy not in the way of on time and short term but in the way of long term, consistent renovation and persistent innovation we can assure that they will produce the highest quality and globally competitive products which are second to none.

• The Korean Journal of Food & Health Convergence
• /
• v.4 no.3
• /
• pp.6-11
• /
• 2018

In the Republic of Belarus as well as in the world acute problem of protecting forests from diseases and pests. The damage caused by root rot is essential, therefore, the problem of forest protection is an urgent task. The biologics has the greatest prospects in according with traditional methods of struggle. Deep method of cultivation of a mushroom Phlebiopsis gigantea with use of nutrient mediums on the basis of ethanol stillage and its components (fugat) is researched. Feasibility of use stillage as raw materials in production of a biological product for the wood protection against root decay is shown. The effect of different additives (sawdust, fodder yeast) on the accumulation of reactive biological product - oidy has been studed It was determined that the deep cultivation using sawdust of the highest accumulation oidy (1.5 $10^6units/ml$). It was also found that the stillage is the best breeding ground for fungus biomass accumulation (7.9 9.8 g / l) versus fugat (6.0 6.6 g / l). On the basis of research work the technological scheme for production of a biological product were developed. Based on the conducted studies, a technological scheme was proposed for obtaining a biological preparation by deep cultivation of the fungus Phlebiopsis gigantea.