• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.73-78
• /
• 2018

The main objective of this study was to evaluate the effects of acetate on the cultivation of anabena under mixotrophic condition. Four different types of acetates were used for the anebena cultivation. Among them, ethyl acetate was found to be the most effective and the growth rates linearly increased as the amount of ethyl acetate increased. When 40 mM of ethyl acetate was used, the highest values of specific growth rate of $0.979day^{-1}$ and maximum biomass productivity of $0.293g\;L^{-1}\;d^{-1}$ were obtained. On the contrary, input of acetic acid and butyl acetate inhibited the growth of anabena. For aeration tests, 0.54 vvm was optimum for anabena cultivation. For a semi-continuous cultivation test, ethyl acetate was used after 0.54 vvm test was finished. Then, test continued under 0.54 vvm and 40 mM of ethyl acetate. Lower specific growth rate and maximum biomass productivity were obtained compared to those from batch cultivation tests. However, the greatest maximum concentration of 5.91 g/L was obtained during the semi-continuous cultivation test.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.1
• /
• pp.99-102
• /
• 2005

Organic solvents are widely used in biotransformation systems. There are many efforts to reduce the consumption of organic solvents because of their toxicity to the environment and human health. In recent years, several groups have started to explore novel organic solvents called room temperature ionic liquids in order to substitute conventional organic solvents. In this work, lipase-catalyzed transesterification in several uni- and bi-phasic systems was studied. Two representative hydrophobic ionic liquids based on 1-butyl-3-methylimidazolum coupled with hexafluorophosphate ([BMIM][$PF_6$]) and bis[{trifluoromethylsulfonyl} imide] ([BMIM] [$Tf_{2}N$]) were employed as reaction media for the transesterification of n-butanol. The commercial lipase, Novozym 435, was used for the transesterification reaction with vinyl acetate as an acyl donor. The conversion yield was increased around $10\%$ in a water/[BMIM][$Tf_{2}N$] bi-phasic system compared with that in a water/hexane system. A higher distribution of substrates into the water phase is believed to enhance the conversion yield in a water/[BMIM][$Tf_{2}N$] system. Partition coefficients of the substrates in the water/[BMIM][$Tf_{2}N$] bi-phasic system were higher than three times that found in the water/hexane system, while n-butyl acetate showed a similar distribution in both systems. Thus, RTILs appear to be a promising substitute of organic solvents in some biotransformation systems.

• Journal of Environmental Science International
• /
• v.32 no.6
• /
• pp.403-417
• /
• 2023

In this study, we investigated the characteristics of Volatile Organic Compounds(VOCs) emission from painting and printing facilities in the Pyeongdong industrial complex in Gwangju. In addition, the objective was to understand the distribution characteristics of VOCs in the ambient air in industrial complexes affected by painting and printing facilities. The painting facility mainly emitted toluene, acetone, butyl acetate, 4-methyl-2-pentanone, ethyl acetate, 1-butanol, methyl ethyl ketone, m,p-xylene, o-xylene, 4-ethyltoluene, ethylbenzene, 3-ethyltoluene, and 1,2,4-trimethylbenzene. The main emission components in printing facilities were methyl ketone, ethyl acetate, acetone, 2-propanol, toluene, heptane, and butyl acetate. Ethyl acetate, toluene, 2-butanone, acetone, butyl acetate, 2-propanol, xylenes, and 4-methyl-2-pentanone were detected in the ambient air of the Pyeongdong industrial complex, consistent with the VOCs emitted by painting and printing facilities. The average concentration of seasonal TVOCs followed an order of winter > fall > spring > summer, whereas the concentrations of daytime and nighttime TVOCs were generally higher at night than those during the day, and the wind speed was greater during the day than it was at night. Based on a factor analysis of VOCs in the ambient air of Pyeongdong industrial complex, it is considered that organic solvents used in coating, printing, and electronics manufacturing facilities, as well as diesel vehicle emissions played a major role.

• Journal of Life Science
• /
• v.16 no.7 s.80
• /
• pp.1243-1249
• /
• 2006

Volatile flavor compounds in commercial crab-like flavorants were compared by mean of solid phase microextraction(SPME) and liquid continuous extraction (LLCE)/GC/MSD methods. A total of 86 volatile flavor compounds were detected. Of these, 71 were positively identified consisting mainly of sulfur-containing compounds (13), aldehydes (3), ketones (2), esters (26), alcohols (5), aromatic compounds (3), terpenes (8), acids (2) and miscellaneous compounds (9). SPME method was more effective than LLCE method in detection of volatile components in commercial crab-like flavorants. Eight S-, N-containing compounds such as dimethyl sulfide, dimethyl disulfide, dipropyl disulfide, 3-(methylthio)propyl acetate, 3-(methylthio) propanal, 3-(methylthio) propanol, 2-methyl-3-(methylthio) pyrazine and 2-methyl-5-(methylthio) pyrazine, 8 esters such as styrallyl acetate, ethyl acetate, isoamyl acetate, benzyl acetate, ethyl pentanoate, butyl pentanoate, isoamyl pentanoate and furfuryl acetate were considered as major components in crab-like flavorants.

• Polymer(Korea)
• /
• v.34 no.4
• /
• pp.306-312
• /
• 2010

Triphenylvinylsilane (TPVS) containing vinyl acetate (VAc), butyl acrylate (BA), and Nmethylolacrylamide (NMA) copolymers were prepared by emulsion polymerization. The polymerization was performed at $80^{\circ}C$ in the presence of auxiliary agents and ammonium peroxodisulfate (APS) as the initiator. Sodium dodecyl sulphate (SDS) and Arkupal N-300 were used as anionic and nonionic emulsifiers, respectively. The resulting copolymers were characterized by using Fourier transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), and dynamic light scattering (DLS). Thermal properties of the copolymers were studied by using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The morphology of copolymers was also investigated by scanning electron microscopy (SEM) and then the effects of silicone concentrations on the properties of the TPVS-containing VAc-acrylic emulsion copolymers were discussed. The obtained copolymers have high solid content (50%) and can be used in weather resistant emulsion paints as a binder.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.459-463
• /
• 2009

In this study, physical properties of poly(vinyl acetate-co-ethylene) (VAE) emulsion were investigated by adding different amounts of di-butyl phthalate (DBP) which is a common plasticizer of VAE. The glass transition temperature $(T_g)$ of the dried plasticized VAE emulsion film, which measured by Differential Scanning Calorimeter, was decreased with increasing the DBP contents while the viscosity of the plasticized VAE emulsion was increased with the DBP contents. These results suggest that the plasticizer in the dried VAE film can prevent the strong interaction between chains, resulted by the decrease of $T_g$. In the emulsion, however, the particle sizes were swelled by the penetration of plasticizers and then its viscosity increased with the DBP content. When the DBP was added, the mechanical properties of the plasticized VAE films, such as tensile strength, elongation and creep resistance, were decreased while the water resistance was increased.

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.779-784
• /
• 2012

Characteristic chemical compositions of jujube wine using different preparation methods including fermentation were investigated. Fermentation for jujube wine started using whole fruit (JW1), seed-removed fruit (JW2) and whole fruit heated at $100^{\circ}C$ for 2 h and then extracted (JW3). The free amino acids and flavors were analyzed quantitatively by HPLC and GC-MS. A total of 18 amino acids were identified in all samples. The amount of total free amino acids was detected from 141-210 ppm (JW1), 147-342 ppm (JW2), and 336-362 ppm (JW3). Large amounts of proline, aspartate, glutamate, arginine and alanine were detected in jujube wine. Thirteen kinds of volatile compounds including six alcoholic compounds (ethyl alcohol, iso-butyl alcohol, n-butyl alcohol, iso-amyl alcohol, n-amyl alcohol, and phenethyl alcohol), four ester (ethyl acetate, hexyl acetate, ethyl caprylate, and phenethyl acetate) and three aldehydes (diethylacetal, furfural, and benzaldehyde) were detected. Ethyl alcohol (30.50-33.95% peak area), benzaldehyde (2.55-15.97% ratio), furfural (0.07-15.28% ratio), iso-amyl alcohol (1.04-14.73% ratio), and phenethyl acetal (0.78-9.28% ratio) were abundant in jujube wine.

• Journal of the Korean Chemical Society
• /
• v.10 no.1
• /
• pp.4-10
• /
• 1966

A new method of cobalt determination has been developed by employing ethylenediamine tetrabutyl acetate(EDTA-butyl ester) synthesized from EDTA and Butyl alcohol. The synthesized EDTA ester dissolved in butyl alcohol extracts various metal ions from aqueous solutions. Cobaltous ion extracted into organic phase containing EDTA ester to form Co (II)-EDTA butyl ester complex is back extracted into alkaline aqueous phase forming a stable pink colored complex of Co (III). The optimum condition for spectrophotometric determination of cobalt via the new complex has been established. The absorption peak occurs at 540$m{\mu}$ and Beer's law was obeyed over the concentration range of 0∼50 ${\mu}g/ml$ of cobalt.

• Clean Technology
• /
• v.23 no.4
• /
• pp.357-363
• /
• 2017

In this study, the supercritical carbon dioxide ($scCO_2$)/ n-butyl acetate (n-BA) co-solvent system was employed to remove an unexposed negative photoresist (PR) from the surface of a silicon wafer. In addition, the selectivity of the $scCO_2$/n-BA co-solvent system was confirmed for the unexposed and exposed negative PR. Optimum conditions for removal of the unexposed PR were obtained from various conditions such as pressure, temperature and n-BA ratio. The n-BA was highly soluble in $scCO_2$ without cloud point and phase separation in mostly experimental conditions. However, the $scCO_2$/n-BA co-solvent was phase separated at 100 bar, above $80^{\circ}C$. The unexposed and exposed PR was swelled in $scCO_2$ solvent at all experimental conditions. The complete removal of unexposed PR was achieved from the reaction condition of 160 bar, 10 min, $40^{\circ}C$ and 75 wt% n-BA in $scCO_2$, as measured by ellipsometry. The exposed photoresist showed high stability in the $scCO_2$/n-BA co-solvent system, which indicated that the $scCO_2$/n-BA co-solvent system has high selectivity for the PR removal in photo lithograph process. The $scCO_2$/n-BA co-solvent system not only prevent swelling of exposed PR, but also provide efficient and powful performance to removal unexposed PR.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.697-698
• /
• 2005