• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.1
• /
• pp.3-18
• /
• 1997

This study was conducted to evaluate desorption efficiencies by types of desorption solvent for polar and non-polar organic compounds collected on activated charcoal tubes. Analytes tested were toluene, m-xylene, isobutyl alcohol, n-butyl alcohol, cellosolve acetate, and butyl cellosolve. Three different concentration levels of spiked sample were made. Types of cosolvent mixed with the main solvent, $CS_2$, were methanol, pentanol, and dimethylformamide (DMF) and the cosolvent for methylenechloride was methanol. The amounts of cosolvent added to the main solvent were 1, 5, and 10% by volume (v/v%), respectively. The results were as follows: 1. For all mixed solvents except 1% methanol and 1% pentanol with $CS_2$, desorption efficiency significantly increased, compared with that of $CS_2$ alone. 2. Desorption efficiency increased by increasing analyte loading on charcoal tube regardless of mixed solvents used and the material polarity. 3. For all cosolvents mixed with $CS_2$ by 1% and 5% volume, desorption efficiency for non-polar compound was significantly higher than that of polar compound. For the 10% mixed solvents and the methylenechloride mixed with methanol, the results were opposite. 4. The lowest mean percent bias of 4.79% was obtained from the 5% DMF-$CS_2$ mixed solvent, followed by 4.82% from the 10% DMF-$CS_2$ solvent while the highest bias of 23.26% was from the solvent of $CS_2$ alone. Based on the results of this study, in order to increase desorption efficiency, it is recommended to add such cosolvents as methanol, pentanol, and DMF to $CS_2$, preferably 5% by volume for analyzing polar compounds collected in charcoal tubes.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1114-1118
• /
• 1999

Barrier rib for the plasma display panel(PDP) was made by photolithographic process utilizing photosensitive barrier rib paste. The barrier rib paste was prepared by first dissolving ethylcellulose(binder polymer) in butyl carbitol(BC)/butyl carbitol acetate(BCA) =30/70 wt % mixture solvent at 15 wt % concentration. To this solution a mixture of functional monomers consisted of tripropyleneglycol diacrylate/ pentaerythritol triacrylate = 50/50 wt %, Irgacur 651 photoinitiator, and barrier rib powder were added and then the whole mixture was mixed in the three roll mill for 2 hr. The effect of component and concentration of photosensitive barrier paste on the photolithographic process was studied. After optimization of the paste formulation and photolithographic process, barrier rib could be obtained with good resolution up to $100{\mu}m$ height.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.8
• /
• pp.1284-1288
• /
• 2005

The methanol extract of Houttuynia cordata repressed the expression of tyrosinase gene of Bl6 mouse melanoma cell containing tyrosinase promoter. The extract repressed expression of tyrosinase gene by about 13$\%$ and 45$\%$ at 10$\mu$g/mL and 100 $\mu$g/mL, respectively. In the MTT assay, the same extract exhibited very low cytotoxicity at 1$\mu$g/mL, 10$\mu$g/mL, and 100 $\mu$g/mL, respectively. The fractions of ethyl acetate, butyl alcohol, and water did not showed the repressive effect on the expression of tyrosinase gone, but methylene chloride fraction layer repressed highly at 10$\mu$g/mL and 100$\mu$g/mL.

• Journal of Applied Biological Chemistry
• /
• v.55 no.4
• /
• pp.217-220
• /
• 2012

The fruits of Acanthopanax sessiliflorus Seeman (Araliaceae) were extracted with 70% aqueous ethanol at room temperature. The concentrated extract was partitioned with ethyl acetate (EtOAc), n-butyl alcohol, and $H_2O$, successively. From the EtOAc fraction, two compounds were isolated through the repeated silica gel, octadecyl silica gel, and Sephadex LH-20 column chromatographies. According to the results of physicochemical and spectroscopic data including NMR, mass spectrometry, and infrared spectroscopy, the chemical structures of the compounds were determined as 3,5-dihydroxycinnamic acid (1) and protocatechuic acid (2). Compound 1 was isolated from the fruits of A. sessiliflirus Seeman for the first time. And the compounds were evaluated for the radical scavenging the antioxidant capacity using 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid)diammonium salt, 1,1-diphenyl-2-picrylhydrazy, and oxygen radical absorbance capacity assay.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.1
• /
• pp.118-123
• /
• 2010

To estimate the regulatory effects of Scutellaria baicalensis extracts on melanin biosynthesis, we evaluated the regulatory effects of the tyrosinase gene on B16 melanoma cells. The results revealed that methanolic extracts of Scutellaria baicalensis resulted in a high increase in the expression of the tyrosinase gene. Specifically, treatment with extracts at concentrations of $10\;{\mu}g/m{\ell}$ and $100\;{\mu}g/m{\ell}$ resulted in increases in tyrosinase gene expression rates of approximately 231% and 256%, respectively, when compared to the control. Moreover, the solvent fraction layers(methylene chloride, ethyl acetate, butyl alcohol, water) improved the expression of the tyrosinase gene, but to a lesser degree than the methanolic extracts. An MTT assay revealed, that the methanolic extract exhibited very low cytotoxicities at $10\;{\mu}g/m{\ell}$ and $100\;{\mu}g/m{\ell}$. Taken together, the results of this study indicated that the methanolic extracts of Scutellaria baicalensis was a very effective positive regulator of tyrosinase gene expression.

• Journal of Applied Biological Chemistry
• /
• v.56 no.1
• /
• pp.23-27
• /
• 2013

The roots of Brassica rapa ssp. were extracted with 95% aqueous ethanol and the concentrated extracts were partitioned using ethyl acetate (EtOAc), n-butyl alcohol and $H_2O$, successively. From the EtOAc fraction, five flavonoids were isolated through repeated silica gel and octadecyl silica gel (ODS) column chromatography (c.c.). Based on NMR, mass spectrometry (MS) and IR spectroscopic data, the chemical structures of the compounds were determined to be licochalcone A (1), 4,4'-dihydroxy-3'-methoxychalcone (2), liquirtigenin (3), liquiritin (4), and isoliquiritin (5). This is the first report of these compounds isolated from the root of this plant.

• Journal of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.113-120
• /
• 1964

The critical examination of the spectrophotometric method for determining microgram quantities of phosphate by the n-butyl acetate extraction as molybdophosphoric acid and subsequent development of the molybdenum blue has been made. In this procedure from 2 to 8 ${\mu}g$. of phosphate-phosphorus can be determined under optimum conditions. The final concentration of ammonium molybdate and the final acidity of perchloric acid for the formation of heteropoly acid are suitable to be ranges of 0.5 to 1.1% and 0. 5 to 1. 1 N respectively, and subsequently extracted with 10 ml. of n-butyl acetate. The extract is developed to molybdenum blue with 5.0 ml. of 1. 3% stannous chloride in 1N hydrochloric acid. The color is stable for at least one hour in the use of perchloric acid for the condensation. In order to determination of submicrogram amounts of phosphate, the sensitivity of the molybdenum blue method is hardly sufficient, a sensitive and stable molybdenum(V)-thiocyanate complex method has been investigated. By the procedure less than 1.2 ${\mu}g$. of phosphate-phosphorus can be determined with an accuracy of less than 5% the relative error. The molybdenum(Ⅵ) extracted by the above procedure is reduced to molybdenum(V) in the extract directly with a solution of 4 to 10% of stannous chloride, 0.5 to 1.5 mM of copper, and 0.1 to 0.9 N of perchloric acid as final concentration in 4.3 to 6.3 N of hydrochloric acid or 9.0 to 13.0 N of sulfuric acid by heating for one minute in boiling water, after cooling, the molybdenum(V)-thiocyanate complex color is developed by adding 6.0 M ammonium thiocyanate solution making the final concentration to be in a range of 0.4 to 0.9 M. This procedure the very sensitive, reliable, and stable can be applied to determining submicrogram amounts of phosphate in natural waters with a precision of 1.6 ${\times}\;10^{-2}$ the standard deviation as absorbance.

• Journal of Applied Biological Chemistry
• /
• v.62 no.1
• /
• pp.7-10
• /
• 2019

The whole plants of Loranthus tanakae were repeatedly extracted with 80% aqueous MeOH and the concentrate was partitioned into ethyl acetate (EtOAc), n-butyl alcohol (n-BuOH) and $H_2O$ fractions. The repeated silica gel ($SiO_2$), octadecyl $SiO_2$ (ODS), and Sephadex LH-20 column chromatographies for the n-BuOH fraction led to isolation of a cyclofarnesane sesquiterpene glucoside. The chemical structure including stereo structure was determined to be a (1'R,3'S,5'R,8'S,2E,4E)-dihydrophaseic acid $3^{\prime}-O-{\beta}-{\text\tiny{D}}$-glucopyranoside on the basis of spectroscopic analyses. This compound was isolated for the first time from L. tanakae in this study. Compound 1 showed a moderate dose-dependent cytotoxicity against human Caucasian gastric adenocarcinoma cells and human hepatocyte cari-noma cells cell lines at higher than $50{\mu}g/mL$.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.2
• /
• pp.15-21
• /
• 2012

MTBE (Methyl tertiary-butyl ether) has been commonly used as an octane enhancer to replace tetraethyl lead in gasoline, because MTBE increases the efficiency of combustion and decreases the emission of carbon monoxide. However, MTBE has been found in groundwater from the fuel spills and leaks in the UST (Underground Storage Tank). Fenton's oxidation, an advanced oxidation catalyzed with ferrous iron, is successful in removing MTBE in groundwater. However, Fenton's oxidation requires the continuous addition of dissolved $Fe^{2+}$. Zero-valent iron is available as a source of catalytic ferrous iron of MFO (Modified Fenton's Oxidation) and has been studied for use in PRBs (Permeable Reactive Barriers) as a reactive material. Therefore, this study investigated the condition of optimization in MFO-PRBs using waste zero-valent iron (ZVI) with the waste steel scrap to treat MTBE contaminated groundwater. Batch tests were examined to find optimal molar ratio of MTBE : $H_2O_2$ on extent to degradation of MTBE in groundwater at pH 7 with 10% waste ZVI. As the results, the ratio of optimization of MTBE to hydrogen peroxide for MFO was determined to be 1:300[mM]. The column experiment was conducted to know applicability of MFO-PRBs for MTBE remediation in groundwater. As the results of column test, MTBE was removed 87% of the initial concentration during 120days of operational period. Interestingly, MTBE was degraded not only within waste ZVI column but also within sand column. It means the aquifer may affect continuously the MTBE contaminated groundwater after throughout the waste ZVI barrier. The residual products showed acetone, TBF (Tert-butyl formate) and TBA (Tert-butyl acetate) during this test. The results of the present study showed that the recycled materials can be effectively used for not only a source of catalytic ferrous iron but also a reactive material of the MFO-PRBs to remove MTBE in groundwater.

• Analytical Science and Technology
• /
• v.15 no.1
• /
• pp.80-86
• /
• 2002

The simultaneous analysis of the odorous compounds designated by law in Korea and Japan was examined with the thermal desorber gas chromatography-mass spectrometry using one column. The approximate concentrations of trimethyl amine, acetaldehyde, methyl mercaptan and dimethyl sulfide were estimated. Styrene, dimethyl disulfide, propionaldehyde, n-butyl aldehyde, i-butyl aldehyde, n-valeraldehyde, i-valeraldehyde, ethyl acetate, toluene, xylene, methyl i-butyl ketone and i-butanol were detected at concentrations of the detection limits of their threshold values. As a typical example of simultaneous analysis of the odorous compounds, the volatile organic compounds emitted from compost procedure of food waste were concentrated and analyzed with thermal desorber/GC/MSD, and major malodorous compounds were estimated from the concentrations and threshold values of the detected components. From the result of analysis, 34 compounds were confirmed and among them, trimethyl amine, i-valeraldehyde, methyl mercaptan, methyl allyl sulfide, dimethyl sulfide, acetaldehyde, ethanol, n-butyaldehyde were expected to attribute to the odor in order of strength.