• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.11-17
• /
• 2017

In this paper, an 8-direction switched beamforming antenna system at 28GHz frequency band is described for 5th generation wireless communication. This system is composed of an $8{\times}8$ Butler matrix and an 8-element patch array antenna. The antenna system switches beams in 8-direction in the wide range of ${\pm}40^{\circ}$. The antenna spacing is $0.65{\lambda}$ to achieve ${\pm}40^{\circ}$ steering range. Designed results show that the 8-direction beams are placed at ${\pm}6^{\circ}$, ${\pm}17^{\circ}$, ${\pm}28^{\circ}$, ${\pm}40^{\circ}$ offset from the center. Parasitic radiation effect from the large dimension Butler matrix need to be suppressed by employing a stripline structure.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.795-801
• /
• 2001

A method of miniaturizing branch line coupler is presented. The method utilizes the microstrip line with overlay(or superstrate). The frequency dependent characteristics, dispersion and characteristic impedance, of this line are obtained by Immitance method in spectral domain and Method of Line. The relevant spectral domain Green's function is given and used to obtain numerical results. The branch line couplers with overlays are designed and fabricated at 2 GHz. The experimental results show that the size of coupler with overlay(${epsilon}_r$=10.2) is 31.4 precent smaller than conventional coupler. This minimized coupler is suitable for Butler Matrix as feeder for mobile communication beam forming antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.598-604
• /
• 2011

A method of miniaturizing branch line coupler with connected coupled lines is presented. The quarter-wavelength transmission lines in the typical microstrip branch line coupler are replaced with the connected coupled lines with same characteristics of ones for compact size. The connected coupled line is analyzed by T-equivalent circuit and Z parameters based on the even-odd mode analysis. The proposed branch line couplers with connected coupled line are designed and fabricated on FR4 substrate at 2.4 GHz. The measured results show good agreement with theoretical prediction. And the experimental results show that the size of coupler is 37 precent smaller than conventional coupler. This minimized coupler is suitable for Butler Matrix as feeder for mobile communication beam forming antenna.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2386-2388
• /
• 2005

As anti-crash and pre-crash systems in vehicles become more extensively used, the need for high performance short-range radars is playing an increasing role. This paper presents the design of a micromachined, ultra-wideband beamformer centered at 24 GHz for automotive short-range radar systems. This beamformer is a Butler matrix designed using ultra-wideband transmission-line couplers, which consist of a multilayered structure that exhibits wider bandwidth compared to conventional microstrip branch-line couplers. The circuit has been designed on a quartz substrate, and to achieve the desired coupling, lines suspended on BCB layers located at specific parts of the circuit were used, achieving a three metal layered structure in form of wide microstrips, that give low loss and a wideband response. In this paper the design and fabrication procedure of the proposed beamformer are fully described.

• Archives of Pharmacal Research
• /
• v.24 no.6
• /
• pp.601-606
• /
• 2001

A simple assay method of recombinant human epidermal growth factor (rhEGF) in a pharmaceutical preparation was studied and validated by capillary electrophoresis (CE) using micellar electrokinetic chromatography (MEKC) techniques. Factors affecting the migration behavior and separation performances of the peptide; type of buffers pH, butler concentration, and concentration of sodium dodecyl sulfates (SDS) were investigated to optimize the analytical performance. CE was performed using running buffers 50.0 mM borate (pH 8.5) containing 12.5 mM SDS at 20 $mutextrm{V}$ of the applied voltage. Calibration curves for the rhEGF showed good linearity (r>0.999) over the wide dynamic range from 1.25 to $100{\mu\textrm{g}}/ml$. Sample analysis was performed by using standard addition method to eliminate the matrix effects of dosage vehicle. This method is assumed to be useful for quality control (QC) of various forms of pharmaceutical products of the peptide.

• Korean Journal of Health Education and Promotion
• /
• v.26 no.5
• /
• pp.15-26
• /
• 2009

Objectives: This paper is intended to illustrate and to discuss the organization and functioning of community resident groups (CRGs) in a community-based participatory health promotion program for healthy aging. Methods: CRGs were convened in 12 government-subsidized apartment communities for low-income seniors in Pennsylvania, U.S.A., to promote healthy aging. Researchers facilitated CRG meetings following a 6-step process of community empowerment and utilizing a social ecological model for assessment and planning. Almost 200 project-related documents were qualitatively analyzed using matrix analysis principles such as cross-classification of multiple dimensions to identify patterns in the data and matrix building for displaying such patterns. Results: CRGs were venues at which apartment building residents could interact, discuss health priorities, and become change agents in their building. CRG members' community health priorities were about their daily living, including building conditions, poor access to fresh food, and unhealthy resident relations. Specific patterns arose in analysis indicating that leadership withing the CRGs, consistency of meetings and participants' attendance, and ability to link health concerns to daily experience impacted the CRGs' capability to identify and accomplish their goals. Conclusion: Community health issues and solutions to those issues identified by CRGs were unique to community contexts and interests. Consistent participation by community members, a consistent pattern of group activities such as monthly meetings, and having established leadership to manage CRG activities were prominent characteristics of community group functioning.