• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.9-12
• /
• 2008

The internal reforming of n-Butane on Ni-YSZ and Cu-Ceria-YSZ was investigated with anode granule at steam to carbon ratio from 0 to 3 and at temperature of $750^{\circ}C$. Although hydrogen production was lager at Ni-YSZ, resistivity for carbon deposition was better at Cu-Ceria-YSZ. These phenomena occur because unwanted side reaction go on with reforming reaction for hydrogen production at Ni-YSZ.

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3281-3289
• /
• 2011

The materials composed of the 3d series transition metals are introduced into the hydrocarbon steam-reforming reaction in order to enhance the $H_2$ production and abruptly depress the catalytic deactivation resulting from the strong sintering between the Ni component and the ${\gamma}-Al_2O_3$ support. The conventional impregnation method is used to synthesize the Ni/3d series metal/${\gamma}-Al_2O_3$ materials through the sequentially loading Ni source and the 3d series metal (Ti, V, Cr, Mn, Fe, Co, Cu, and Zn) sources onto the ${\gamma}-Al_2O_3$ support. The Mnloaded material exhibits a significantly higher reforming reactivity than the conventional Ni/${\gamma}-Al_2O_3$ and the other Ni/3d series metal/${\gamma}-Al_2O_3$ materials. Particularly the addition of Mn selectively improves the $H_2$ product selectivity by eliminating the formation of $CH_4$ and CO. The $H_2$ production is maximized at a value of 95% over Ni(0.3)/Mn(0.3)/${\gamma}-Al_2O_4$(1.0) with a butane conversion of 100% above $750^{\circ}C$ for up to 55 h.

• 공업화학
• /
• 제24권4호
• /
• pp.375-381
• /
• 2013

상업용 니켈 촉매를 사용하여 메탄과 천연가스의 수증기 개질 반응을 각각 수행하였다. 수증기 개질 반응의 변수는 반응 온도와 반응물의 분압이었다. Kinetic data로부터 Power law rate model과 Langmuir-Hinshelwood model의 매개변수를 구하였다. 순수한 메탄을 수증기 개질 반응 실험의 원료로 사용한 경우에는 Langmuir-Hinshelwood model 식은 물론이고 Power law rate model을 사용하여 반응 속도를 적절하게 표현할 수 있었다. 그러나 천연가스 중의 메탄의 수증기개질 반응 속도를 표현하는데 있어서는 Power law rate model보다 Langmuir-Hinshelwood model이 훨씬 더 적합한 것을 확인하였다. 이러한 거동은 천연가스 중에 포함되어있는 메탄, 에탄, 프로판 및 부탄이 동일한 촉매 활성점에 경쟁적으로 흡착하기 때문으로 해석할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.218-221
• /
• 2009

Solid oxide fuel cells (SOFCs), as high-temperature fuel cells, have various advantages. In some merits of SOFCs, high temperature operation can lead to the capability for internal reforming, providing fuel flexibility. SOFCs can directly use CH4 and CO as fuels with sufficient steam feeds. However, hydrocarbons heavier than CH4, such as ethylene, ethane, and propane, induce carbon deposition on the Ni-based anodes of SOFCs. In the case of the ethylene steam reforming reaction on a Ni-based catalyst, the rate of carbon deposition is faster than among other hydrocarbons, even aromatics. In the reformates of heavy hydrocarbons (diesel, gasoline, kerosene and JP-8), the concentration of ethylene is usually higher than other low hydrocarbons such as methane, propane and butane. It is importatnt that ethylene in the reformate is removed for stlable operation of SOFCs. A new methodology, termed post-reforming was introduced for removing low hydrocarbons from the reformate gas stream. In this work, activity tests of some post-reforming catalysts, such as CGO-Ru, CGO-Ni, and CGO-Pt, are investigated. CGO-Pt catalyst is not good for removing ethylene due to low conversion of ethylene and low selectivity of ethylene dehydrogenation. The other hand, CGO-Ru and CGO-Ni catalysts show good ethylene conversion, and CGO-Ni catalyst shows the best reaction selectivity of ethylene dehydrogenation.

• 대한기계학회논문집B
• /
• 제32권7호
• /
• pp.558-565
• /
• 2008

Solid oxide fuel cell(SOFC) has a higher fuel flexibility than low temperature fuel cells, such as polymer electrolyte fuel cell(PEMFC) and phosphoric acid fuel cell(PAFC). SOFCs also use CO and $CH_4$ as a fuel, because SOFCs are hot enough to allow the CH4 steam reformation(SR) reaction and water-gas shift(WGS) reaction occur within the SOFC stack itself. Diesel is a good candidate for SOFC system fuel because diesel reformate gas include a higher degree of CO and $CH_4$ concentration than other hydrocarbon(methane, butane, etc.) reformate gas. Selection of catalyst for autothermalr reforming of diesel was performed in this paper, and characteristics of reforming performance between packed-bed and microchannel catalyst are compared for SOFC system. The mesh-typed microchannel catalyst also investigated for diesel ATR operation for 1kW-class SOFC system. 1kW-class diesel microchannel ATR was continuously operated about 30 hours and its reforming efficiency was achieved nearly 55%.

• 공업화학
• /
• 제8권3호
• /
• pp.543-549
• /
• 1997

니켈(Ni)이 담지된 촉매상에서 이산화탄소와 부탄의 직접반응에 의한 합성가스와 탄화수소화합물의 생성을 검토하였다. $CO_2$와 $C_4H_{10}$의 반응에서 니켈 담지촉매는 백금 담지촉매와 유사한 활성을 나타내었으며, 부탄의 탈수소에 따큰 코크의 누적이 현저하게 나타났다. 담체로 알루미나나 Y형 제올라이트를 사용하면 일산화탄소와 수소가 주생성물이었다. 반면에 니켈을 ZSM-5형 제올라이트에 담지한 경우에는 생성물 중에 다량의 방향족화합물이 얻어졌다. Ni/ZSM-5, Ni/NaY 및 Ni/알루미나 촉매상에서 반응물 중의 이산화탄소/부탄 몰비의 증가와 함께이산화탄소의 전환율도 증가하다가 2이상에서 다시 감소하였다. 담체로 ZSM-5를 사용하고 이에 담지되는 니켈의 양을 다르게 하였을 때, 반응물의 전환율은 니켈금속의 담지량이 5wt% 부근에서 가장 높았다. 코크가 누적된 촉매상에 $CO_2$ 가스나 수증기를 흘리면 코크의 양은 감소하였다. 촉매상에 누적된 코크는 활성이 높은 상태로 결합되어 있으며, 표면의 활성탄소는 반응의 중요한 중간체로 작용하는 것으로 해석된다.