• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.208-222
• /
• 2023

With the recent revision of 「Act on Promotion of the Transportation Convenience of Mobility Disadvantaged Persons」 and the Enforcement Regulations of the Act, bus business operators must introduce low-floor buses when scrapping buses. On the other hand, in the case of routes where low-floor buses cannot be operated, bus business operators can be exempted from introducing low-floor buses with the approval of their transportation administrative agency according to Article 4-2 of 「Enforcement Regulation of the Act on Promotion of the Transportation Convenience of Mobility Disadvantaged Persons」. According to the data from the Korea Bus Transportation Associations Federation, approximately 5.9% of all city bus routes were surveyed as the exceptions to introducing low-floor buses. Nevertheless the proportion is expected to increase because some regions with difficulties introducing low-floor buses are not included when calculating the proportion. By confirming the process of approving exceptions for introducing low-floor buses through local governments, there was no specific examination method or standard for approval of exceptions. Hence, there is the problem that some routes are approved as exceptions to introducing low-floor buses, even though low-floor buses can be operated on those routes. Therefore, this study aims to develop a manual that can objectively diagnose the overall operation environment of low-floor buses, such as road geometry and road facilities. Future research plans to apply it to more cases and improve it for more precise application in various contexts.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.99-108
• /
• 2014

PURPOSES : The travel times of expressway buses have been estimated using the travel time data between entrance tollgates and exit tollgates, which are produced by the Toll Collections System (TCS). However, the travel time data from TCS has a few critical problems. For example, the travel time data include the travel times of trucks as well as those of buses. Therefore, the travel time estimation of expressway buses using TCS data may be implicitly and explicitly incorrect. The goal of this study is to improve the accuracy of the expressway bus travel time estimation using DSRC-based travel time by identifying the appropriate analysis period of input data. METHODS : All expressway buses are equipped with the Hi-Pass transponders so that the travel times of only expressway buses can be extracted now using DSRC. Thus, this study analyzed the operational characteristics as well as travel time patterns of the expressway buses operating between Seoul and Dajeon. And then, this study determined the most appropriate analysis period of input data for the expressway bus travel time estimation model in order to improve the accuracy of the model. RESULTS : As a result of feasibility analysis according to the analysis period, overall MAPE values were found to be similar. However, the MAPE values of the cases using similar volume patterns outperformed other cases. CONCLUSIONS : The best input period was that of the case which uses the travel time pattern of the days whose total expressway traffic volumes are similar to that of one day before the day during which the travel times of expressway buses must be estimated.

• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.159-167
• /
• 2013

PURPOSES: The purpose of this study is to develop an effectiveness analysis method of exclusive median bus lanes, which is necessary in order to improve operation efficiency of exclusive median bus lanes. METHODS : The operation characteristics of "signalized intersection including exclusive median bus lanes" and "normal signalized intersection" were investigated and the existing capacity analysis method was also reviewed to analyze the effectiveness of exclusive median bus lanes. Delay reduction of passengers using exclusive median bus lanes which can be considered as the benefit of exclusive median bus lanes and the number of people in buses were included in the proposed effectiveness analysis method. RESULTS : It was found that the proposed method expresses properly the effectiveness of exclusive median bus lanes through performing sensitivity analysis and analyzing with the real data of the number of people in buses and passenger cars. It was also found that the proposed method demonstrates the effectiveness that measure of effectiveness of signalized intersections is changed to "sec/person". CONCLUSIONS : It was concluded that the method is a proper effectiveness analysis method because it can reflect the benefit of passengers in buses.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.5
• /
• pp.475-484
• /
• 2000

Recently, processor arrays to enhance the banRecently, processor arrays to enhance the bandwidth of buses and to reduce the complexity of hardwares, using optical buses instead of electronic buses, have been proposed in manyliteratures. In this paper, we first propose a constant-time algorithm for parentheses matching problemon a linear array with slotted optical buses (LASOB).Then, given an algebraic expression of length n, we also propose a cost optimal parallel algorithmthat constructs computational tree form in the steps of constant time on LASOB with n processorsby using parentheses matching algorithm. A cost optimal parallel algorithm for this problem that runsin constant time has not yet been known on any parallel computation models.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1769-1777
• /
• 2018

This paper proposes a method for optimal placement of Phasor Measurement Units (PMUs) considering system configuration and its attributes during the planning phase of PMU deployment. Each bus of the system is assessed on four diverse attributes; namely, redundancy of measurements, rotor angle and frequency monitoring of generator buses, reactive power deficiency, and maximum loading limit under transmission line outage contingency, and a consolidated 'degree of criticality' is determined using Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). The major contribution of the proposed work is the development of modified objective function which incorporates values of the degree of criticality of buses. The problem is formulated as maximization of the aggregate degree of criticality of the system. The resultant PMU configuration extends complete observability of the system and majority of the PMUs are located on critical buses. As budgetary restrictions on utilities may not allow installation PMUs even at optimal locations in a single phase, multi-horizon deployment of PMUs is also addressed. The proposed approach is tested on IEEE 14-bus, IEEE 30-bus, New England (NE) 39-bus, IEEE 57-bus and IEEE 118-bus systems and compared with some existing methods.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.214-217
• /
• 2013

Advancements in automobile industries and the communication technologies caused VANET (Vehicular Ad Hoc NETwork) to evolve to VANET-based clouds before its deployment. It is more likely that VANET clouds will replace the traditional VANET in the deployment phase. It is to be noted that an abrupt deployment is out of question because it would require mass of resources and money to do so; instead incremental deployment is more ideal. In this paper, we aim at the incremental deployment phase of VANET clouds and focus on the well-established public transport networks. Data aggregation is one of the essential aspects in traditional VANET and has been researched for quite long time. However the previously proposed schemes are still controversial. Keeping in mind the time and space prediction of public buses, we leverage these buses as potential aggregators and MG (Mobile Gateways) in VANET clouds. Buses gather cooperative whereabouts information from neighbors, aggregate that information, disseminate it to the neighbor MGs and also send it to the cloud for storage and for services exchange. In our proposed scheme, we believe that the dissemination will be effective and cover most of the urban area since at any instant of time; buses cover most part of the urban areas. Besides, the effective transmission range is higher due to tall buses.

• Journal of Korean Society of Transportation
• /
• v.14 no.1
• /
• pp.69-80
• /
• 1996

In most cities, travel demand is distributed along long corridors and its destinations tend to concentrate in a central business district. For this kind of many-to-one or one-to-many travel demand pattern, a zonal operation of buses can be an efficient bus operation technique in which a long bus-demand corridor is divided into service zones and each service zone is provided with its own bus route connecting the service zone and single destination separately. This paper develops models of the total transportation costs for a single-zone operation and 2-zonal operation of buses for a long demand corridor with single destination in terms of various cost parameters, demand density, bus operation speeds, and location of the boundary between two service zones. In this study the total transportation cost is assumed to consist of the bus operation cost, passenger waiting cost and passenger travel time cost. It was proved that a zonal operation of buses can be more efficient than a single-zone operation for certain circumstances of the system and an boundary condition between two operation techniques was obtained. Also, several case studies were performed for various values of the cost parameters.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.6
• /
• pp.279-286
• /
• 2001

A load modeling, micro method, is performed by component load modeling, load composition rate estimation and aggregation of component load model, etc. The load model obtained from this process must be applied to actual load bus to verify it and to get reliable load model. But it is difficult to apply every load bus due to al lot of load buses and complex experiment. This paper proposed the field test method in load bus to verify the load modeling. For appropriate field test, representative load buses are selected by the proposed algorithm considering the composition rate of user category in all load buses. The field tests were performed at selected load buses to obtain load characteristics of bus by time and seasonal without blackout. The results of measurement and analysis are presented in detail.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.4
• /
• pp.50-53
• /
• 2018

Some local government, community rehabilitation center, special school operate buses which can be used by wheel chair user in order to commute. However, there are no regulations or laws for safety management of buses and its wheel chair lifts. To prevent discrimination among the physically challenged people, government of Korea plan to supply buses which wheel chair users are able to on board. Safety management system should be prepared to ensure safe and convenient use of express and intercity buses for wheel chair users. In this study, domestic and international standards and regulations of wheel chair lift are thoroughly reviewed and based on this research, national safety standards for wheelchair lift are suggested for the future.

• Journal of Korean Society of Transportation
• /
• v.36 no.1
• /
• pp.13-22
• /
• 2018

Buses, one of the representative public transportation modes, are divided into a vareity of service types according to the purpose of operation, operating distance, and management agencies. Although bus-involved crashes may cause large amount of damage due to the higher number of passengers boarded on a bus, prior research has little focused on crash severity according to bus service types. This study aims to investigate factors influencing crash severity in bus-involved crashes and to present policy implications to reduce crash severity by bus service type. To do this, bus-involved crash data from the Traffic Accident Analysis System (TAAS) during five-year period are used. Ordered probit models for three types of bus service, i.e., city bus, suburban and express buses, and charter buses, are estimated to analyze the factors of accident severity. The results show that there are significant differences of factors affecting crash severity among the types of bus services while speed and road surface influence all the types of buses. In case of local buses, time of day, roadway alignment, and installation of a traffic signal are found to be statistically significant factors. Seat belt and road class have significant effects on injury severity of the intercity and express buses. Chartered buses have time of day, driving experience, seatbelt, traffic signal, and day of week as the significant factors. The results of this study are expected to contribute to the reduction of the crash severity by each bus service type.