• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.101-114
• /
• 2006

Recently due to the increase of cars and city life, the traffic congestion has worsened. It Is particularly worse in the center of the metropolis. Within the general public means, the public transport buses have the advantage of being more cheap, accessible and mobile. But as there is no separate lane for buses, the collision of cars and buses are creating damage to public service. In order to solve this situation, the bus priority signal system has been introduced to reduce the bus travel time and improve its services. The purpose of this study is to establish bus priority signal algorithm which builds bus efficiency under the real-time traffic signal control system and to analyze the effect of it. As the green time was calculated against real time (under the real-time traffic signal control system), compared to existing bus priority signal there was a reduction in cross street loss. The modified cycle was used to maintain signal progression. A case study was carried out using VISSIM simulation model. In result of this study, we found that there was a decrease in bus travel time despite some evidence of car delays and compared to existing bus priority signal the delay of dishonor could be reduced dramatically. The analysed result of person delay using MOE, is that there is evidence that when bus priority signal is in effect, the person delay is reduced.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.3
• /
• pp.20-33
• /
• 2021

Modern society is steadily implementing policies to encourage public transportation to cope with the growing traffic demand on limited roads. The expectation is rising for transit signal priority to ensure the speed of buses as the installation of the bus rapid transit(BRT) expands nationwide to secure the competitiveness of buses. On the other hand, the form of BRT stops without considering some aspects of bus operation may increase the number of stops on the bus, thereby reducing the effectiveness of bus signal priority applications. This study suggests the type of bus stop to increase the operation efficiency of buses by analyzing the bus signal priority effect according to the BRT station type using Hannuri-daero, Sejong. The bus signal priority is used to maximize the two-way bandwidth of passenger cars and buses. As a result of the application, the effectiveness of the bus signal priority at the stop causing the double stop of the bus was reduced drastically, and the efficiency of the bus signal priority was increased significantly after improvement. These results are expected to be used as basic data in the form of proper bus stops considering the aspects of traffic operation when designing BRT stops in new towns in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.15-25
• /
• 2014

Bus signal priority is a name for various techniques to speed up bus public transport services at intersections with traffic signals. In this study propose methodology to optimize signal times for Early green, Green extension out of the active bus signal priority using deterministic delay model in isolated intersection on median bus lane. Fluctuation is found in the vehicle delay and person delay in the event that using this methodology redistributed to green time and checking slack green time is correct value by sensitivity analysis. As a result of the study, car delay is increased a little and person delay is decreased. As a result of slack green time sensitivity, delay is not much in it if variation of slack green time under 30%. But this methodology effectiveness is under claimed capacity if variation of slack green time over 30%.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.57-66
• /
• 2012

This study intended to evaluate the operational performance change from the introduction of the bus signal priority system using the field data. To complete the objective, travel time and volume data were collected from the before and after study, then the distribution of individual vehicle's travel time and the difference of travel time and traffic volume were compared respectively. Analysis results showed that no significant volume change was observed from both passenger vehicle and bus for the major and cross streets. It was identified that the quality of travel time distributions of passenger vehicle and bus was improved after introducing the bus signal priority system. In terms of average speed, passenger car in a major direction increased by 6.5% and bus increased by 10.5% in general. Statistical tests showed that those speed differences were statistically significant at the 95% of confidence level. The results of this paper will be a good source for further research in the area of bus signal priority control.

• 한국ITS학회:학술대회논문집
• /
• 2010.05a
• /
• pp.109-113
• /
• 2010

• 한국ITS학회:학술대회논문집
• /
• 2005.11a
• /
• pp.125-129
• /
• 2005

• Journal of Korean Society of Transportation
• /
• v.5 no.2
• /
• pp.5-18
• /
• 1987

Buses arrive at a traffic intersection later than passenger cars by the amount of dwell time at previous bus stops. This late arrival of buses affects the total passenger delay at intersections especially in the street carrying large bus volume. The bus progression signal system in which the signal offset is given in favor of bus platoons was applied in the case area of Kangnam street in Seoul, and various effects were analyzed using the TRANSYT-7F simulation model. It was observed that the total passenger delay can be reduced significantly if the bus progression signal system is applied, and the most effective bus priority treatment is proved to be the bus progression signal system installed with exclusive bus lanes.

• Journal of Korean Society of Transportation
• /
• v.29 no.6
• /
• pp.107-116
• /
• 2011

In this paper, we implement an algorithm of transit signal priority control that not only maximizes service quality and efficiency of bus, but also minimizes the control delay of passenger cars using UTIS currently being deployed and operated in Seoul national capital area. For this purpose, we propose an algorithm that coordinates the strength of TSP by estimating bus demand. Typically, the higher the strength of TSP is on main street, the bigger the control delay is on the cross street. Motivated by this practical difficulty, we proposes an algorithm that coordinates TSP's strength by checking the degree of saturation of cross street. Also, we verify the possibility of field implementation via simulation analysis using CORSIM RTE based HILS (Hardware In the Loop Simulation). The result shows that travel time of bus improves about 10 percent without increasing control delay of passenger cars by TSP. We expect the result of this research to contribute to increasing the overall transit ridership in this country.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.21-28
• /
• 2012

The continuous deployment of Urban Traffic Information System (UTIS) in Korea has increased the need for developing more practical applications utilizing the standard functions of UTIS facilities installed on urban arterials beyond its basic applications like gathering traffic data and providing traffic information. The UTIS-based bus signal priority may be one of UTIS-based applications meeting such demands. However, the studies on BSP have not been sufficient for actual field deployment in terms of theories and algorithms so that there have been few actual installations on real urban arterials. Thus, this study was aimed at developing a UTIS-based bus priority signal system and evaluating its effectiveness through a field study. To this end, this study presents the system development processes by dividing the UTIS-based bus priority signal system into hardware and software. In addition, the positive effectiveness of the UTIS-based bus priority signal system was verified through a field application test which was conducted at Gyeonggi Global Trade High School intersection.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.637-644
• /
• 2020

VANET (Vehicular Ad Hoc Networks) is a network between vehicles and between vehicles and infrastructure. VANET-specific characteristics such as high mobility, movement limitation, and signal interference by obstacles make it difficult to provide stable VANET services. To solve this problem, this paper proposes a vehicle type-based priority clustering method that improves the existing bus-based clustering. The proposed algorithm constructs a cluster by evaluating the priority, link quality, and connectivity based on the vehicle type, expected communication lifetime, and link degree of neighbor nodes. It tries to simplify the process of selecting a cluster head and increase cluster coverage by utilizing a predetermined priority based on the type of vehicle. The proposed algorithm is expected to become the basis for activating various services by contributing to providing stable services in a connected car environment.