• 제목/요약/키워드: Bus model

검색결과 727건 처리시간 0.029초

수단선택의 이질성을 고려한 잠재계층모형(Latent Class Model) 구축: 서울시 통근자를 사례로 (Developing a Latent Class Model Considering Heterogeneity in Mode Choice Behavior : A Case of Commuters in Seoul)

  • 김성후;추상호
    • 한국ITS학회 논문지
    • /
    • 제18권2호
    • /
    • pp.44-57
    • /
    • 2019
  • 교통계획에서 사람들의 수단선택 의사 결정과정을 이해하고 이를 토대로 수요예측의 정확성을 높이는 것은 매우 중요하다. 이를 위해 여러 계층마다 수단선택 영향요인들이 다르게 나타나는 이질성(taste heterogeneity)을 반영한 모형들이 개발되어 왔다. 본 연구에서는 목적지의 토지이용 특성에 따라 수단선택에 미치는 요인의 영향력이 다를 것이라는 가설을 세우고 2010년 서울시 가구통행실태조사 자료를 활용하여 서울시내 출근통행에 대한 잠재계층모형을 분석하였다. 먼저 목적지의 토지이용 특성을 활용하여 수단선택에 대한 잠재계층을 구분하고, 각각의 잠재계층에 대한 수단선택 모형을 개발하였다. 잠재계층모형 추정결과, 서울시내 출근통행 수단선택의 경우 두 개의 잠재계층으로 분석되었다. 첫 번째 계층은 승용차와 대중교통의 수단분담이 비슷하고, 목적지가 상대적으로 도심이 아닌 주거시설이 많은 지역들이고, 두 번째 계층은 주로 대중교통의 분담률이 높고 목적지가 상대적으로 도심에 속하는 업무/상업시설이 많은 지역이다. 또한 이들 계층간의 수단선택 모형의 경우, 인구 및 사회경제지표들의 수단선택에 미치는 영향이 계층간에 차이가 있는 것으로 분석되었다.

수압파열시험 시 시료 탱크 내부 기포 제거를 위한 주입 노즐 및 내부 유속 연구 (A Study on Injection Nozzle and Internal Flow Velocity for Removing Air Bubbles inside the Sample Tanks during Hydraulic Rupture Test)

  • 이예승;양현석;정우철;이동훈;공만식
    • 한국가스학회지
    • /
    • 제26권6호
    • /
    • pp.9-15
    • /
    • 2022
  • 사용 압력 범위에서 고압 수소 탱크의 내구성을 검증하기 위해서는 수압 파열 시험이 수행되어야 한다. 그런데 물의 초기 주입 과정에서 물과 공기의 상호작용에 의해 생성된 기포가 탱크 내벽에 부착되어 잔류할 경우, 가압된 탱크가 파열되는 과정에서 기포의 급격한 압력 변화로 인해 큰 충격과 소음이 유발된다. 따라서 본 연구에서는 단순화된 수식을 통하여 탱크 내벽에 잔류하는 기포를 제거하기 위해 필요한 유속을 예측하였으며, 수소 버스용수소 용기 형상을 기준으로 해당 유속을 유지하기 위한 주입 노즐의 형상을 결정하였다. 또한 입구 압력에 따른 유속 변화를 예측하기 위하여 수치 해석 모델의 개발이 수행되었고, 예측 결과의 타당성을 입증하기 위하여 모형 제작을 통한 실험이 수행되었다. 실험 결과, 탱크 벽면 근처의 유속은 해석모델 예측 값과 유사하게 나타났으며, 입구 압력이 1.5 ~ 5.5 bar 일 경우 제거 가능한 기포의 최소 크기는 약 2.2 ~ 4.6 mm로 예측되었다.

최적용량매칭 및 실시간 제어전략에 의한 직렬형 하이브리드 버스의 연비향상 (Series-Type Hybrid Electric Bus Fuel Economy Increase with Optimal Component Sizing and Real-Time Control Strategy)

  • 김민재;정대봉;강형묵;민경덕
    • 대한기계학회논문집B
    • /
    • 제37권3호
    • /
    • pp.307-312
    • /
    • 2013
  • 직렬형 하이브리드 자동차는 구조가 간단하고 단품들의 효율이 높기 때문에 연비성능이 우수하며, 병렬형과 비교하여 배터리, 엔진, 모터의 용량이 상대적으로 고용량인 특징을 가진다. 본 연구에서는 직렬형 하이브리드 자동차의 최적용량매칭을 통해 최적의 연비를 도출하고, 실시간 시뮬레이션 환경에서 사용될 알고리즘을 개발한다. 연구에서 진행된 용량매칭은 모터, 엔진/발전기 및 배터리를 대상으로 13개 주행 사이클에 대하여 순차적으로 이루어 졌으며, 이를 위해 Matlab 환경에서 최적화 기법인 DP(Dynamic Programming)을 사용하였다. 실시간 성능검증을 위한 차량모델은 Simulink 및 AMEsim을 기반으로 개발되었고 실시간 제어로직이 구현된 RCP(Rapid Control Proto-typing)와 연동하여 그 성능을 확인할 수 있었다.

아리랑1호 위성 ETB의 전도성 전자파 환경 시험결과 분석 (A Analysis on the Result of CE/CS Test on the KOMPSAT-I ETB)

  • 임성빈;천용식
    • 한국전자파학회논문지
    • /
    • 제12권2호
    • /
    • pp.184-192
    • /
    • 2001
  • 본 논문에서는 아리랑 1호 개발단계에서 위성의 전기/전자적 기능 시험을 수행하기 위해 개발 모델로 구성된 Electrical Test Bed(ETB) 플랫폼에서 수행한 전도성 방출 및 전도성 감응시험 결과를 분석하였다. 전도성 전자파환경시험은 전력공급장지(Power control unit)로부터 위성을 구성하고 있는 각각의 하드웨어와DC 전원을 공급하기 위하여 스위치가 동작하는 순간, 전력 및 신호선을 통하여 전달하게 될 노이즈의 순시 파형을 시간 영역에서 측정하고, 모든 하드웨어에 전력이 공급되어 정상상태로 동작하는 동안에 발생하는 노이즈특성을 시간영역과 주파수 영역에서의 스펙트럼을 10 Hz에서 100hz까지 스캐닝하여 그 레벨을 측정하여 결과를 분석한 결과를 이용하여 6 dB이상의 시스템 마진을 더한 결과를 노이즈 소스로 공급하여 하드웨어의 오동작 및 하드웨어의 손상이 없음을 검증하였다. 본 시험은 아리랑 1호 위성의 공동개발을 수행한 미국 TRW 사의 위성체 조립시험장에서 수행되었다.

  • PDF

한류산업에 있어서 해외시장지향성과 사업성과에 관한 연구 (Study of Overseas Market Orientation and Bus mess Performance in 'Feel Korea' Industry)

  • 전태석
    • 한국컴퓨터정보학회논문지
    • /
    • 제10권6호
    • /
    • pp.321-336
    • /
    • 2005
  • 본 연구는 영상산업에 종사하는 수출마케팅 담당자를 대상으로 최근 활발하게 불고 있는 한류산업 중심으로 해외시장을 겨냥한 시장지향성에 관해 Jaworski & Kohli Kohli(1993)의 선행연구를 토대로 영상물 사업체의 수출마케팅 향상을 위한 요소로써 최고경영자 요인(Top management factor), 부서간 협력관계(Interdepartmental cooperation), 내부조직특성 (Organizational character), 마케팅역량(Marketing capability), 환경요인(Environment), 그리고 수출사업성과(Export performance)간의 관계에 대한 규명을 목적으로 하고 각 변수들에 대한 기존연구들을 바탕으로 하여 이론적 연구모델을 제시하였으며, 조사 대상은 국내의 공중파 방송국인 KBS, MBC, SBS 등을 포함하여 전체 36개회사의 총 306명의 종사자를 대상으로 설문하고 그 중 마케팅 담당자들을 중심으로 106명의 표본을 최종 분석에 활용한 결과 Jaworski & Kohli(1993)의 시장지향성에 관한 기존 연구들의 결과와 부분적으로 유사한 것으로 나타났다.

  • PDF

Development of Energy Management System for Micro-Grid with Photovoltaic and Battery system

  • Asghar, Furqan;Talha, Muhammad;Kim, Sung-Ho
    • 한국지능시스템학회논문지
    • /
    • 제25권3호
    • /
    • pp.299-305
    • /
    • 2015
  • Global environmental concerns and the ever increasing need of energy, coupled with steady progress in renewable energy technologies, are opening up new opportunities for utilization of renewable energy resources. Distributed electricity generation is a suitable option for sustainable development thanks to the load management benefits and the opportunity to provide electricity to remote areas. Solar energy being easy to harness, non-polluting and never ending is one of the best renewable energy sources for electricity generation in present and future time. Due to the random and intermittent nature of solar source, PV plants require the adoption of an energy storage and management system to compensate fluctuations and to meet the energy demand during night hours. This paper presents an efficient, economic and technical model for the design of a MPPT based grid connected PV with battery storage and management system. This system satisfies the energy demand through the PV based battery energy storage system. The aim is to present PV-BES system design and management strategy to maximize the system performance and economic profitability. PV-BES (photovoltaic based battery energy storage) system is operated in different modes to verify the system feasibility. In case of excess energy (mode 1), Li-ion batteries are charged using CC-CV mechanism effectively controlled by fuzzy logic based PID control system whereas during the time of insufficient power from PV system (mode 2), batteries are used as backup to compensate the power shortage at load and likewise other modes for different scenarios. This operational mode change in PV-BES system is implemented by State flow chart technique based on SOC, DC bus voltages and solar Irradiance. Performance of the proposed PV-BES system is verified by some simulations study. Simulation results showed that proposed system can overcome the disturbance of external environmental changes, and controls the energy flow in efficient and economical way.

전기자동차 LDC 시스템의 전도 방출에 관한 고주파 모델링 연구 (High-Frequency Circuit Modeling of the Conducted-Emission from the LDC System of a Electric Vehicle)

  • 정기범;조병찬;정연춘
    • 한국전자파학회논문지
    • /
    • 제24권8호
    • /
    • pp.798-804
    • /
    • 2013
  • 본 논문에서는 고주파 회로 모델링을 이용하여 전기자동차의 LDC로부터 방출되는 전도성 전자파 잡음을 시스템-레벨에서 분석하였다. 관련 전도 방출의 주요 원인은 LDC에서 사용하는 펄스폭 변조 방식의 100 kHz 스위칭 동작에 기인하며, 이러한 전도 방출은 공통-임피던스 결합 및 유도성 결합을 통해 AM/FM 주파수 대역에서의 무선주파수 간섭을 유발한다. 이러한 문제를 분석하기 위해 LDC를 구성하고 있는 MOSFET과 고압 커패시터, 고전압 케이블과 버스 바에 대한 기본 회로는 물론, 각 부분에서 존재하는 기생 성분 및 비선형 특성을 해석하여 LDC 전체를 포함한 시스템-레벨의 고주파 등가회로 모델을 제안하였다. 이러한 모델을 이용하여 시뮬레이션과 측정을 비교하여 유사성을 검증하였다. 향후 이러한 접근 방법이 전기자동차의 전자파 적합성 설계에 효과적으로 사용될 수 있을 것으로 기대한다.

혼잡통행료 징수와 대중교통 차내 혼잡수준의 관계 (The Relationship Between Congestion Pricing and In-vehicle Crowding Level in Public Transport)

  • 유상균;배기목
    • 대한교통학회지
    • /
    • 제34권6호
    • /
    • pp.510-522
    • /
    • 2016
  • 대중교통을 포함한 연구들에서 사회적 효용 증진은 대중교통서비스 개선 또는 승용차 이용 억제책을 통한 대중교통 수요증가에 의한 것으로 풀이된다. 하지만 지금까지 대중교통 수요증가는 통행수단의 통행량 변화를 통해 사회적 효용에 영향을 미치고 관찰될 뿐, 대중교통 차내 혼잡도는 고민의 대상이 아니었다. 본 연구는 혼잡통행료 시행으로 증진되는 사회적 효용과 변화되는 대중교통수단 차내 혼잡도를 관찰하고 원인을 규명한다. 본 연구에서 혼잡통행료 시행은 대중교통수단 차내 혼잡도를 증가시키고, 대중교통 전용차로가 없는 경우 대중교통수단 혼잡도는 더욱 심화된다. 주목할 점은 대중교통수단 차내 혼잡도가 도심보다 도심 외곽구역에서 더욱 악화되고, 최선의 혼잡통행료는 차내 혼잡도를 상대적으로 덜 악화시키면서 효용증진 임무를 완수한다. 이러한 결과는 통행자의 직주근접성 변화, 통행횟수 조절, 그리고 혼잡통행료 징수가 가져올 우발적인 왜곡효과 때문으로 해석된다.

Recent Progress of MIRIS Development

  • Han, Won-Yong;Lee, Dae-Hee;Park, Young-Sik;Nam, Uk-Won;Jeong, Woong-Seob;Ree, Chang-Hee;Moon, Bong-Kon;Park, Sung-Joon;Cha, Sang-Mok;Lee, Duk-Hang;Park, Jang-Hyun;;Seon, Kwang-Il;Yang, Sun-Choel;Park, Jong-Oh;Rhee, Seung-Wu;Lee, Hyung-Mok;Matsumoto, Toshio
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2011년도 한국우주과학회보 제20권1호
    • /
    • pp.23.4-23.4
    • /
    • 2011
  • MIRIS is the main payload of the Science and Technology Satellite-3 (STSAT-3). which is being developed by KASI for infrared survey observation of the Galactic plane at Paschen alpha wavelength. Wideband filters in I and H band will also be used to observe cosmic infrared background. The MIRIS will perform astronomical observations in the near-infrared wavelengths of 0.9~2 ${\mu}m$ using a 256 ${\times}$ 256 Teledyne PICNIC FPA sensor providing a 3.67 ${\times}$ 3.67 degree field of view with a pixel scale of 51.6 arcsec. The flight model of the MIRIS has been recently developed, The system performance tests have been made in the laboratory, including opto-mechanics test, vibration test, thermal vacuum test and passive cooling test down to 200K, using a thermally controlled vacuum chamber. Several focus tests showed good agreements compared to initial design parameters. Recent efforts are being concentrated to improve the system performances, particularly to reduce readout noise level in electronics. After assembly and integration into the satellite bus, the MIRIS will be launched in 2012.

  • PDF

인버터 기반 분산전원의 무효전력 제어 특성에 따른 분산전원의 수용용량 및 전압조정 설비의 운영 계획 분석 (Analysis of the Hosting Capacity of the Distributed Generation and Voltage Regulation Devices Operation According to Reactive Power Control Scheme of the Inverter-based Distributed Generation)

  • 조규정;김지수;송진솔;신재윤;김동현;김철환
    • 전기학회논문지
    • /
    • 제67권7호
    • /
    • pp.809-815
    • /
    • 2018
  • Distributed generations (DGs) using renewable energy resources in power systems have been widely integrated, and many of these DGs have intermittency. DGs can significantly affect the overall voltage profile of the system through the reactive power control for a voltage support. Therefore, in the planning stage of the optimal operation and dispatch of voltage regulation devices, DGs' hosting capacity with the reactive power control scheme should be considered. In this paper, we model the IEEE 34-bus test feeder, including all essential equipment. An optimization method is utilized to determine the optimal siting and operation of the voltage regulation devices in the presence of DGs with reactive power control scheme. Finally, we compare the optimal results of the each case to analyze the relationship among the hosting capacity of the DGs and voltage regulation devices operation.