• Journal of Electrical Engineering and Technology
• /
• 제5권4호
• /
• pp.631-636
• /
• 2010

Gas-insulated transmission lines (GITL) are valued as technological solutions in hydro-power stations due to their enormous power handling capabilities. The performance of GITL is a function of the size of metallic particles inside the gas-insulated chamber. Electrostatic field (E-field) enhancement is a common phenomenon in gas-insulated lines due to these metallic particles. In this study, the E-field enhancement factor is calculated by considering metallic particles at various locations in the gas-insulated line/bus section, such as high-tension (HT) conductor, high-voltage shields, support insulator, and inner surface of grounded enclosure. For this purpose, a two-dimensional model based on finite element (FE) method is developed. The length of the metallic particle is in the range of 1 to 10 mm while the diameter is between 1 to 3 mm. E-field enhancement is also computed for various particle configurations of the gas-insulated system, with focus on dielectric coating made of epoxy on HT conductor and inner surface of grounded enclosure.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.60-70
• /
• 2014

This paper discusses the impacts of large scale grid-connected wind farm equipped with permanent magnet synchronous generator (PMSG) on power system small signal stability (SSS) incorporating wind generation uncertainty and volatility. Firstly, a practical simplified PMSG model with rotor-flux-oriented control strategy applied is derived. In modeling PMSG generator side converter, the generator-voltage-oriented control strategy is utilized to implement the decoupled control of active and reactive power output. In modeling PMSG grid side converter, the grid-voltage-oriented control strategy is applied to realize the control of DC link voltage and the reactive power regulation. Based on the Weibull distribution of wind speed, the Monte Carlo simulation technique based is carried out on the IEEE 16-generator-68-bus test system as benchmark to study the impacts of wind generation uncertainty and volatility on small signal stability. Finally, some preliminary conclusions and comments are given.

• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.148-156
• /
• 2001

Brake judder, one of low Sequency vibrations in brake system is determined by the excitation of Brake Torque Variation (BTV). The largest contributor to BTV is disc thickness variation. In this study, the static loads of brake torque at Suspension Mounting Points (SW) are obtained by the quasi-static analysis using DADS. The dynamic loads with frequency of BTV at SW are derived from correlation between forced vibration analysis with static loads and brake test results. And the accelerations at steering wheel were analyzed by forced vibration analysis with dynamic loads using commercial finite element program MSC/NASTRAN so that vibration characteristics of vehicle due to brake judder were investigated. Reliability of analysis results was verified through comparing the brake test results. Also, a parametric study with natural frequencies of frame, such as the 1st torsional mode and 1st bending mode, was conducted to reduce vibration amplitudes. As a result we could detect frame natural frequency conditions to improve vibration characteristics and obtained the frame model to reduce vibration amplitude.

• 한국도로학회논문집
• /
• 제19권6호
• /
• pp.155-164
• /
• 2017

PURPOSES : Owing to the growth of income and socio-economic levels, demands from road users have diversified. Accordingly, new road policies are being actively sought. The metropolitan city government of Busan has been focused on constructing and expanding roads to accommodate the increasing traffic demand. Given the increase in functional characteristics, we need to re-evaluate the hierarchy and function of roads, and specifically remodel the road planning and operations that fit into their functions. METHODS : First, this study focuses on introducing the minimum condition required to redefine the hierarchy of the roads. Second, the authors propose a new model that identifies the impact level of road hierarchy adopting discriminated analysis technique. RESULTS : Authors suggest that we redefine the hierarchy of roads in the central business distinct in Busan, and specifically the arterial roads in Busan, namely, Joonang-daero and Gaya-ro. These roads need to be reequipped with cross walks, a lower speed limit, and exclusive bus lanes to improve their accessibility. CONCLUSIONS : The authors found that the sub-arterial and collector roads have been subjected to excessive loads, owing to inappropriate functions being assigned to the main arterial road. Moreover, given that through traffic is concentrated on the sub-arterial and collector roads, over-speeding and other safety issues are consequently created.

• 토지주택연구
• /
• 제11권2호
• /
• pp.1-14
• /
• 2020

The aim of this study is to empirically identify the differentiating characteristics of determinant factors on sing-person households' commuting mode choice compared to multi-person households' one in order to establish the customized police directions to decrease private car use in commuting. While the study use the 2% sample survey data on the population and housing in 2015, it employ multinomial logit models on relative choice probability of such alternative commuting modes as bus, subway or rail, and walking, rather than driving. As potential determinant factors, the study employs demographic, socio-economic, and housing and residential one for both models of single-person and multi-person households. The study finds that the behavior of commuting mode choice has distinctive difference by gender, marriage status, physical activity constraint, job type, residential period in current housing of the single-person household's workers compared to the multi-person households' ones. Based on the findings, the study deduce ten commuting policy directions customized for the single-person household.

• 한국시스템다이내믹스연구
• /
• 제13권2호
• /
• pp.25-45
• /
• 2012

The purpose of this study is to estimate the effects of healthy city policies on residents' walking. In order to estimate promotion of walking rates by healthy cities policies, it developed System dynamics(SD)-based model which showed causal relationships among urban design, public health policies, and walking levels. SD technique is useful for future forecast and policy impact assessment. The spatial units of the SD-based system for policy impact assessment included 66 cities, counties, and communities in Seoul Metropolitan Area. The system simulation was planned to be run for 21 years from 2009 to 2030. For this study, 3 alternatives were proposed with combinations of length of bike lanes, number of bus routes, crime rates, self-reported good health status rates, and obesity rates. As a result of simulations, residents' participation rates for walking were increased from 1.00% to 9.98%. This study contributes to better understanding the benefits of healthy cities that are associated with individual walking. It further provided useful insights into planners' role in promoting health. The paper concluded with a discussion on future research opportunities and implications for public policies in urban and transportation and public health.

• 한국항공우주학회지
• /
• 제30권1호
• /
• pp.132-138
• /
• 2002

오늘날 여러 가지 측면에서 전략적으로 고성능의 위성 본체를 개발하는 것은 매우 중요하다. 본 연구에서는 부분구조합성법의 하나인 구속모드법을 이용한 연성하중해석 기법 및 모달 과도해석법을 사용하여 위성체 구조부재에 대한 최적화를 수행하였다. 제안된 방법은 초기 설계시, 일반적으로 사용되고 있는 준정적 하중을 이용하지 않고, 동종의 발사체에 대해 유사한 위성과의 연성하중해석 자료를 이용함으로써, 각 구조부재에 대해 보다 정확한 결과를 얻을 수 있는 장점이 있다. 예제를 통해 제안된 기법이 초기단계의 위성체 구조 부재의 효율적인 최적설계 및 중량 감소를 위해 적용될 수 있음을 확인하였다.

• Journal of Welding and Joining
• /
• 제17권6호
• /
• pp.25-31
• /
• 1999

Stainless steel sheets are commonly used for vehicles such as the bus and the train. These are mainly fabricated by spot-welding. By the way, its fatigue strength is lower than base metal due to high stress concentration at the nugget. edge of the spot-welding. By the way, its fatigue strength is lower than base metal due to high stress concentration at the nugget edge of the spot-welding point. Especially, it is influenced by welding conditions as well as geometrical factors of spot welded joint. Therefore, it is not too much to say that structural rigidity and strength of spot-welded structures is decided by fatigue strength of spot welded lap joint. Thus, it is necessary to establish a reasonable and systematic long life design criterion for the spot-welded structure. In this study, numerical stress analysis was performed by using 3-dimensional finite element model on IB-type spot-welded lap joint of 304 stainless steel sheet under tension-shear load. Fatigue tests were also conducted on them having various thickness, joint angle, lapped length, and width of the plate. From the results, it was found that fatigue strength of IB-type spot-welded lap joints was influenced by its geometrical factors, however, could be systematically rearranged by maximum principal stress ({TEX}$σ_{1max}${/TEX}) at the nugget edge of the spot-welding point.

• 한국콘텐츠학회논문지
• /
• 제6권11호
• /
• pp.225-234
• /
• 2006

본 논문에서는 콘텐츠 보호의 암호화를 위해 ECC, MD-5, AES를 통합한 보안 프로세서를 SIP (Semiconductor Intellectual Property)로 설계하였다. 각각의 SIP는 VHDL RTL로 모델링하였으며, 논리합성, 시뮬레이션, FPGA 검증을 통해 재사용이 가능하도록 구현하였다. 또한 ARM9과 SIP들이 서로 통신이 가능하도록 AMBA AHB의 스펙에 따라 버스동작모델을 설계, 검증하였다. 플렛폼기반의 통합 보안 SIP는 ECC, AES, MD-5가 내부 코어를 이루고 있으며 각각의 SIP들은 ARM9과 100만 게이트 FPGA가 내장된 디바이스를 사용하여 검증하였으며 최종적으로 매그나칩 $0.25{\mu}m(4.7mm{\times}4.7mm$) CMOS 공정을 사용하여 MPW(Multi-Project Wafer) 칩으로 제작하였다.

• 조명전기설비학회논문지
• /
• 제12권2호
• /
• pp.115-120
• /
• 1998

본 논문에서는 발전기의 특성을 보다 정확히 해석하기 위해 발전기의 상세모델에 동일축 전류성분에 의한 포화특성과 교차자화에 의한 포화특성을 고려한 상태방정식을 발전기의 전류모델에 대하여 제시하였다. 발전기의 포화특성을 종래의 동일축성분 전류에 의한 포화특성 뿐만 아니라 교차자화 효과에 의한 포화특성까지도 고려할 수 있도록 각 경우의 자속쇄교수와 전류의 관계를 나타내는 인덕턴스 행렬의 표현식을 보였으며, 발전기를 해석하기 위한 기준 좌표계로 발전기의 d축이 q축보다 위상이 $90^{\circ}$앞서는 좌표계를 사용하여 관계식을 재정립함으로써 정태안정도 해석에 사용하던 기존의 발전기모델과 일치하도록 한였다. 사례연구를 통해서 보다 정확한 안정도 해석을 위해서는 교차자화 효과를 고려한 발전기 모델이 계통해석에 사용되어야 함을 입증하였다.