• 제목/요약/키워드: Bus Information Systems

검색결과 326건 처리시간 0.026초

Fast fabrication of amphibious bus with low rollover risk: Toward well-structured bus-boat using truck chassis

  • Mehrmashhadi, Javad;Mallet, Philippe;Michel, Paul;Yousefi, Amin Termeh
    • Smart Structures and Systems
    • /
    • 제24권4호
    • /
    • pp.427-434
    • /
    • 2019
  • This study investigates the structural integrity of the amphibious tour bus under the rollover condition. The multi-purpose bus called Dual Mode Tour Bus (DMTB) which explores on land and water has been designed on top of a truck platform. Prior to the fabrication of new upper body and sailing equipment of DMTB, computational analysis investigates the rollover protection of the proposed structure including superstructure, wheels, and axles. The Computer-Aided Design (CAD) of the whole vehicle model is meshed and preprocessed under high performance using the Altair HyperMesh to attain the best mesh model suited for finite element analysis (FEA) on the proposed system. Meanwhile, the numerical model is analyzed by employing LS-DYNA to evaluate the superstructure strength. The numerical model includes detail information about the microstructure and considers wheels and axles as rigid bodies but excludes window glasses, seats, and interior parts. Based on the simulation analysis and proper modifications especially on the rear portion of the bus, the local stiffness significantly increased. The vehicle is rotated to the contact point on the ground based on the mathematical method presented in this study to save computational cost. The results show that the proposed method of rollover analysis is highly significant not only in bus rollover tests but in crashworthiness studies for other application. The critical impartments in our suggested dual-purpose bus accepted and passed "Economic Commission for Europe (ECE) R66".

Tier 3 방법론을 활용한 BIS 사업의 CO2 저감효과 분석 - 대전-청주 간 광역BIS 사업을 중심으로 - (Reduction Effect of CO2 Emission on BIS Using Tier 3 Methodology - A Case Study on Daejun-Chungjoo Project -)

  • 정연식;송태진;김정완
    • 대한토목학회논문집
    • /
    • 제31권3D호
    • /
    • pp.375-381
    • /
    • 2011
  • 본 연구는 ITS(Intelligent Transport Systems) 기술 중 버스대중교통의 신속성 및 정시성 등 서비스 향상을 위해 구축된 버스정보시스템(BIS: Bus Information System) 운영에 대한 $CO_2$ 저감효과를 분석하였다. IPCC에서는 $CO_2$ 저감효과 분석을 위해 3가지 방법을 제시하고 있으며, 이 중 가장 구체적인 Tier 3 방법을 활용하고자 하였다. 분석은 대전-청주 간 BIS 구축 노선 중 8.3km 구간에 대하여 진행되었으며, Tier 3 방법에 필요한 교통 관련 자료는 ITS 기반으로 수집된 자료를 활용하였다. 분석결과, BIS사업 시행에 따른 $CO_2$ 저감효과는 연간 $39.45tCO_2/km$가 있는 것으로 나타났다. 이러한 $CO_2$ 저감효과는 향후 BIS 사업의 효과척도로 사용 가능할 것으로 판단된다.

교통약자를 위한 사물인터넷 기반 버스 알림 서비스 시스템 개발 (Development of Bus Notification Systems Based on IoT for Vulnerable Pedestrians)

  • 장원창;박지상;이명의
    • 한국항행학회논문지
    • /
    • 제20권6호
    • /
    • pp.588-594
    • /
    • 2016
  • 고령화 사회가 다가옴에 따라 교통약자가 증가하는 추세이며, 이에 따라 대중교통에 대한 문제점은 다발적으로 발생하고 있다. 발생하는 대부분의 문제점은 버스 운전기사가 탑승할 승객을 인지 못하고 정류장을 지나치는 것이다. 본 논문에서는 이러한 문제점을 해결하기 위해 IoT기반의 버스 알림 서비스 시스템을 개발하였다. 개발한 시스템은 공공데이터를 이용하여 버스 노선을 확보한 뒤 GPS정보를 이용하여 사용자에게 정류장 위치를 알려주고 버스 운전기사에게 탑승해야하는 손님의 정보를 전달하는 시스템이다. Application을 만들어 각 지역별로 실외에서 실제 움직이는 차량의 위치를 GPS로 수신한 후 데이터를 전송하는 방법을 통해 연구를 진행하였다. 실험 결과 사람이 많은 경기지역에서도 승객의 위치를 제대로 판별하는 것을 확인할 수 있었으며, 평균오차거리는 31m 이며, 오류로 처리해야 할 데이터를 제외할 경우 19m 로 높은 신뢰성을 제공한다.

마스터와 슬레이브에 따른 싱글버스와 다중버스 토폴로지의 성능분석 (Performance Analysis of Single and Multiple Bus Topology Due to Master and Slave)

  • 이국표;윤영섭
    • 대한전자공학회논문지SD
    • /
    • 제45권9호
    • /
    • pp.96-102
    • /
    • 2008
  • SoC의 버스 구조에는 싱글버스와 다중버스로 구분된다. 싱글버스는 전송을 원하는 여러 개의 마스터 중 선택된 하나의 마스터만이 데이터 트랜잭션을 수행할 수 있다. 반면에 다중버스는 개별적으로 동작이 가능한 버스를 브리지를 통해 연결하여 각각의 버스에서 여러 데이터를 병렬 처리할 수 있다. 그러나 현재의 버스에서 다른 버스로 데이터 통신을 수행할 경우, 레이턴시가 급격하게 증가할 수 있다. 게다가, 다중버스의 성능은 마스터의 개수, 슬레이브의 종류 등에 따라 쉽게 바뀔 수가 있다. 이에 본 논문에서는 TLM(Transaction Level Model) 시뮬레이션 방법을 이용하여 마스터의 개수, SDRAM, SRAM, 레지스터 등의 슬레이브 종류에 따른 싱글버스와 다중버스 아키텍처의 성능을 정량적으로 비교 분석하였다.

Design of an FPGA-based IP Using SPARTAN-3E Embedded system

  • Moon, Sang-Ook
    • Journal of information and communication convergence engineering
    • /
    • 제9권4호
    • /
    • pp.428-430
    • /
    • 2011
  • Recent semiconductor design technology has been substantially developed that we can design a micro-system on a chip as well as implementing an application specific IC in an FPGA. SPARTAN-3E developed by Xilinx is equipped with an FPGA that holds as much as 500 thousand transistors connected with MicroBlaze softcore microprocessor bus system. In this paper, we discuss a method of implementing an embedded system using the SPARTAN-3E. We also explain the peripherals and the bus protocols and the expandability of this kind of embedded systems.

엣지 클라우드 시스템 기반 버스 정보 시스템의 지연시간 분석연구 (A Study on the Latency Analysis of Bus Information System Based on Edge Cloud System)

  • 서승호;고대식
    • Journal of Platform Technology
    • /
    • 제11권3호
    • /
    • pp.3-11
    • /
    • 2023
  • 실시간 관제 시스템은 IoT, 이동통신과 같은 기반 기술의 발달과 공장관리, 차량 운행 체크 등 실시간성이 중요시되는 서비스가 증가함에 따라 급격히 성장하고 있다. 이 시스템의 시간적 민감성을 높이기 위해 다양한 솔루션이 제시되어 왔으나, 현재 대부분의 실시간 관제 시스템은 관제소 등에 위치한 로컬 서버와 다수의 클라이언트로 구성되어 있고, 이들은 다양한 단계를 거쳐 관제 시스템이 위치한 로컬 서버로 전송되고, 그 대응 역시 동일한 단계를 거쳐 진행되는 등 기존 네트워크 및 시스템의 구조적 한계가 있다. 본 논문에서는 실시간 관제 시스템 중 하나인 버스 정보 시스템이 정보를 수집한 시점에서 사용자에게 해당 정보를 제공하기까지 소모되는 시간을 줄일 수 있는 엣지 컴퓨팅 기반 실시간 관제 모델을 제안하였다. 기존 모델과 엣지 컴퓨팅 모델을 시뮬레이션 한 결과, 엣지 컴퓨팅 모델은 사용자에게 데이터를 전송하기 위한 코스트가 기존 모델에 비해 최소 10% 에서 최대 80%까지 감소함을 확인하였다.

  • PDF

부천시 사례를 통한 버스정보시스템 운영효과 분석 (An Analysis on the Efficiency of Bus Information Systems in Bucheon City)

  • 배덕모
    • 대한교통학회지
    • /
    • 제20권1호
    • /
    • pp.7-18
    • /
    • 2002
  • 부천시에서는 대중교통이용 활성화를 위하여 2000년 12월 비콘방식의 버스정보시스템을 구축하고 22번 시내버스 노선에서 운영 중에 있다. 본 연구에서는 부천시의 버스정보시스템 도입사례를 통해 운영효과를 분석하였다. 운영효과는 크게 도착시간 정보의 신뢰도 평가와 버스정보시스템 도입에 대한 이용자의 만족도에 대하여 분석하였다. 도착시간 정보제공 서비스의 신뢰도 평가결과 정류소간 주행시간뿐만 아니라 이전 운행의 주행시간 이력자료 또한 일정한 패턴을 형성하지 못하여 도착시간 정보제공용 자료로 직접 활용하기에는 부적합함을 발견하였다. 이를 개선하기 위하여 기존 도착시간 예측모형을 적용한 결과 신경망 모형이 가장 우수하게 평가되었으며, 버스정보시스템의 도착시간 예측알고리즘으로 적용가능함을 알 수 있었다 본 연구에서는 국내에 아직까지 GPS 방식의 버스정보시스템이 구축되지 못한 관계로 불가피하게 부천시의 사례에 한정된 운영효과평가를 수행할 수밖에 없었다. 향후 첨단교통모델도시의 구축으로 GPS 방식의 버스정보시스템이 구축될 경우 두 가지 방식에 대한 직접적인 비교평가도 가능하리라고 판단된다. 또한, 버스도착 예측 정보의 신뢰성 제고를 위해 예측력 있는 모형의 개발이 요구되며 아울러 노선버스의 운행에 영향을 미치는 요소들에 대한 연구가 추가되어야 할 것이다.

분산제어시스템을 위한 타이머 제어형 통신망의 주기 및 실시간 비주기 데이터 전송 방식 (Tramsmission Method of Periodic and Aperiodic Real-Time Data on a Timer-Controlled Network for Distributed Control Systems)

  • 문홍주;박홍성
    • 제어로봇시스템학회논문지
    • /
    • 제6권7호
    • /
    • pp.602-610
    • /
    • 2000
  • In communication networks used in safety-critical systems such as control systems in nuclear power plants there exist three types of data traffic : urgent or asynchronous hard real-time data hard real-time periodic data and soft real-time periodic data. it is necessary to allocate a suitable bandwidth to each data traffic in order to meet their real-time constraints. This paper proposes a method to meet the real-time constraints for the three types of data traffic simultaneously under a timer-controlled token bus protocol or the IEEE 802.4 token bus protocol and verifies the validity of the presented method by an example. This paper derives the proper region of the high priority token hold time and the target token rotation time for each station within which the real-time constraints for the three types of data traffic are met, Since the scheduling of the data traffic may reduce the possibility of the abrupt increase of the network load this paper proposes a brief heuristic method to make a scheduling table to satisfy their real-time constraints.

  • PDF

분산 송전손실정보에 의한 전력시스템의 경제운용 (A Power System Economic Operation using Bus Distributed Transmission Loss Information)

  • 이봉용;심건보
    • 대한전기학회논문지
    • /
    • 제39권4호
    • /
    • pp.333-340
    • /
    • 1990
  • 분산 송전송실정보에 의한 전력시스템의 경제운용=The transmission loss information produced in a line may be shared by both end buses connected to the line. Then, the loss may be seen as if it is discretely produced at both buses. Likewise, all transmission losses can be considered as if they are discretely produced at every bus distributed. The bus transmission loss equation can be defined, in which the loss information about connected lines are contained. This formulation can greatly enhance the computational efficiency for the economic control of both real powers and voltages. It requires solutions of two linear matrix equations, one for the calculation of incremental transmission losses and the other for the determination of voltage levels to be controlled. The Proposed approach is demonstrated through three sample systems and it is found that the solutions can be obtained after three iterations regardless of system sizes. This implies that only one-step search would be required for the solution if real informations would be available. Results are compared with those of optimal power flows.

  • PDF

SoC Emulation in Multiple FPGA using Bus Splitter

  • Wooseung Yang;Lee, Seung-Jong;Ando Ki;Kyung, Chong-Min
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 II
    • /
    • pp.859-862
    • /
    • 2003
  • This paper proposes an emulation environment for SoC designs using small number of large gate-count FPGA's and a PC system. To overcome the pin limitation problem in partitioning the design when the design size overwhelms the FPGA gate count, we use bus splitter modules that replicate on-chip bus signals in one FPGA to arbitrary number of other FPGA's with minimal pin count. The proposed scheme is applied to the emulation of 2 million gate multimedia processing chip using two Xilinx Viretex-2 6000 FPGA devices in 6.6MHz operating frequency. An ARM core, memories, camera and LCD display are modeled in software using dual 2GHz Pentium-III processors. This scheme can be utilized for more than 2 FPGA's in the same ways as two FPGA case without losing emulation speed.

  • PDF