• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.2
• /
• pp.189-196
• /
• 2011

Recently, research and development of a hybrid system for passenger cars as well as for heavy-duty vehicles has become more intensive. An electric powertrain system using an electric motor can replace conventional gasoline and diesel engines. The electric motor has a higher efficiency, better acceleration performance, and is more comfortable than conventional powertrain systems; however, new methods for assessing power performance and energy convergence efficiency have to be investigated because the characteristics of an electric motor are entirely different from those of an internal combustion engine (ICE). In this study, an experiment was carried out on a motor (PMSM: Permanent Magnet Synchronous Motor) test bench. One simple driving mode and four other driving modes identified from real-world driving data of a city bus were selected to perform the experiment on the motor test bench. Then, methods for assessing the acceleration performance, energy convergence efficiency, regenerative effect, etc., were investigated. It was found that the energy efficiency of PMSM was about 90% and that 40% of demand energy was regenerated.

• The Journal of Information Systems
• /
• v.31 no.3
• /
• pp.47-65
• /
• 2022

Purpose With the recent development of Big Data and Artificial Intelligence technology, self-driving technology has developed into three stages (partial self-driving) or four stages (conditional self-driving), it is expected to bring a new paradigm to transportation in the city. Although many researchers are researching related technologies, there is no research on self-driving for disabled persons. In this study, the basic research was conducted based on the assumption that the shared self-driving car used by the disabled person is similar to the special transportation currently driving. Design In this study, data analysis and machine learning techniques were utilized to analyze the mobility patterns of disabled persons by type and to search for leading factors affecting the traffic volume of special transportation. Findings The study found that external physical disorders and developmental disorders often visit general welfare centers, internal organ disorders often visit general hospitals, and the elderly and mental disorders have various destinations. In addition, machine learning analysis showed that the main transportation routes for the disabled person use arterial roads and auxiliary arterial roads and that the ratio of building usage-related variables affecting the use of special transportation for a disabled person is high. In addition, the distance to the subway and bus stops was also mentioned as a meaningful variable. Based on these analysis results, it is expected that the necessary infrastructure for shared self-driving cars for disability person traffic will be used as meaningful research data in the future.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.821-827
• /
• 2020

In particular, vehicles with internal combustion engines of public transportation such as diesel and CNG buses are in urgent need of measures to reduce emissions as they have a long daily total mileage, long driving hours and a large number of vehicles. In this paper, the fuel consumption rate (km/kWh) was actually measured through road test of electric buses. Based on the measured values, CO₂ emissions from internal combustion engines and electric buses were calculated per bus. In addition to environmental improvement effects such as the expected reduction of carbon dioxide compared to CNG buses when replacing city buses with electric buses, additional effects were analyzed when the replacement of CNG buses is expanded to electric buses.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2633-2640
• /
• 2009

We design a small-area, low-power, and high-speed EEPROM for touch screen controller IC. As a small-area EEPROM design, a SSTC (side-wall selective transistor) cell is proposed, and high-voltage switching circuits repeated in the EEPROM core circuit are optimized. A digital data-bus sensing amplifier circuit is proposed as a low-power technology. For high speed, the distributed data-bus scheme is applied, and the driving voltage for both the EEPROM cell and the high-voltage switching circuits uses VDDP (=3.3V) which is higher than the logic voltage, VDD (=1.8V), using a dual power supply. The layout size of the designed 128-KBit EEPROMIP is $662.31{\mu}m{\times}1314.89{\mu}m$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.4
• /
• pp.321-329
• /
• 2001

This study included three experiments to evaluate in-vehicle exposures to PM10 and CO: 1) evaluation of in-passenger car exposures, 2) evaluation of in-public bus exposures, and 3) simultaneous evaluation of in-passenger car and in -university bus exposures. The tests of four factors (transportation mode, passenger-car type, commute period, and commute season were focused. A total of 40 actual passenger car commuters, 20 public bus commuters, and four university buses were recruited or surveyed. The same commuters ware participated in both the summer and winter studied. Two factory such as transportation mode and passenger-car type were found to have little effect on the in-vehicle levels of PM10 and CO. Commute period was found to have little effect on the in-vehicle CO levels. Conversely, the other factor, commuting season was found to influence on the in-vehicle levels of PM10 and CO. The present study also confirmed that under the Korean commute conditions, vehicle interiors are an important microenvironment for exposure to PM10 and CO. This was supported by finding that the in-vehicle Air levels were much higher than ambient air levels reported by several previous studies. The mean in -vehicle PM10 concentrations were 114 and 103$\mu\textrm{g}$/m$^3$for passenger cars and public buses, respectively. For CO, the mean in-vehicle concentrations were 2.9 and 2.6 ppm for passenger cars and public louses, respectively.

• Journal of Power System Engineering
• /
• v.13 no.6
• /
• pp.102-109
• /
• 2009

A retarder, as a supplementary brake system that is not friction-based, is frequently used in heavy-duty vehicles generally to slow the vehicles down on inclines. The electric retarder mainly used in a heavy-duty bus is generally placed between the transmission and the axle. The rotor inside the retarder system is attached to the axle. The operation of the retarder within a driven vehicle generates reverse torque due to coast driving force on hypoid gears in the differential gear system. By the reverse torque, scoring or scuffing on the hypoid gear teeth may directly occur. The scoring may be generated due to excessive contact stresses on the tooth surface. In this study, tooth contact stresses and contact patterns were analysed in order to investigate on the tooth scoring phenomenon using a finite element analysis program T900 in which the Hertzian contact stress formula was taken. Backlash, wear and surface finish were considered in the finite element simulation on the scoring.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.450-451
• /
• 2008

The Bimodal tram is developed in KRRI (Korea Railroad Research Institute). This vehicle will be used in the public transportation system. The Bimodal tram has the advantages of both bus and train. Bus system has the advantages of flexibility of the routes delivering passengers to the destination and easy accessibility. Train is to meet the scheduled arrival and massive public transportations. The vehicle is the rubber tired tram and is all wheel steered single articulation. The vehicle can be automatically operated by navigation control system (NCS). For the automatic driving, the vehicle lanes will be marked with permanent magnets that are buried in the road. The control algorithm developed for navigation control has to be verified before being applied in the vehicle. In this purpose, we design the simulator for controller test of the bimodal tram.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.9-12
• /
• 2008

For the large-sized and post-ultra definition TFT-LCD, improved drivability is prerequisite not only for the integration of driving circuit on glass but also for the chargeability of each pixel. In order to meet required drivability, currently adopted process architecture and materials are modified for the RC delay reduction, including the drastic increase of gate bus thickness and its related solution for step coverage. We present new process architecture and material selection for the next generation TFT-LCD devices.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.489-494
• /
• 2000

In the high speed driving conditions, the vibrational phenomena with relation to chassis system are becoming more important factors in chassis design and development. In this paper Commercial Dynamic program is used to model middle size bus for brake judder phenomenon. To verify the effects of a body structure in brake judder, body structure is modeled in flexible. Also mode shapes and frequencies are obtained from Commercial FEA program in the same condition of experimental test. The simulation results are compared to the experimental results and summarized

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.4
• /
• pp.426-431
• /
• 2004

We have studied the pressure-dependent liquid crystal's dynamics in a twisted nematic (TN) liquid crystal panel with thin film transistor by applying an external pressure to it. When the external pressure is applied to the panel in a dark state, the disclination lines were generated as a light leakage whereas they did not appear in a simple test cell that has only pixel and common electrodes. It was because the disclination lines were Provoked by the electric field between pixel electrode and data/gate bus line for active matrix driving. Consequently, the external pressure resulted in dynamic instability of the liquid crystal so that the disclination lines at the data/gate bus line intruded into the active area.