• Proceedings of the KIPE Conference
• /
• 2004.11a
• /
• pp.85-89
• /
• 2004

This paper presents Power Control and Distribution Unit development of GEO satellite with 3kW power output. The sensing error of bus voltage produce control signal of the shunt switch assembly and battery power converter, and the tolerance of error signals generated decide the stability of proposed system. The dynamic characteristics of main bus according to the load changing and the control logic of FPGA are simulated. In order to verify the proposed design, the simulation and experimental results for solar array shunt switch, battery power converter and bus controller are shown.

• Journal of Korean Society of Transportation
• /
• v.33 no.2
• /
• pp.170-181
• /
• 2015

This study explores passengers' travel characteristics at six bus stops on the Seoul Ring Expressway using smart traffic card data. Based on the characteristics, political strategies to improve bus facilities on expressway are suggested. Firstly, among them two bus stops of Guri and Uiwang-Cheonggye have higher transfer rate of passengers, 37.56% and 36.9% of the total intercity (red) bus passengers on the expressway, respectively. Secondly, Uiwang-Cheonggye bus stop has the highest transfer rate, and Guri bus stop has also higher transfer rate and the highest on-and-off passengers. It implies that both bus stops need to be prioritized for improving bus stop facility, access roads, and connection facility between the bi-directional stops. Thirdly, Guri (down) bus stop has relatively longer waiting time for transfer, thus shorter bus headways running the bus stop should be considered. Lastly, most passengers using both stops come to and from Bundang-gu in Geongnam City. Overall, the results of this study would be helpful for transport planners to develop effective bus route policies and bus operation.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.247-255
• /
• 2014

This study supplements the existing bus information system's weakness which is a text-based system, transmits GUI based user request contents, design and implements the bus information system using smart-phone GPS. The existing bus information system had to install the terminals on the bus and take enormous expenses on maintenance with setting up the direction board on each bus station. The proposed system provides bus route and user location using the smart-phone map screen, finds the nearest bus station, indicates the bus route on map screen, applies our algorithm which increases accuracy of the bus arriving time, and provides route construction of the inner-cycle bus. The accuracy of the estimated bus arriving time has increased to about 88.71% which is 22.71% more than the existing system whose accuracy is 67% and improved into GUI form that the existing system was on text and table UI. Consequently, the upgraded bus information system uses the smart-phone GPS to supplement the existing bus information system and satisfies different requests of users.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.55-61
• /
• 2019

To improve bus service quality and passengers' safety at bus stops, it is necessary to analyze the relationship between bus stopping behaviors and bus stop conditions. Thus, this study investigated the proper stopping rate at 31 bus stops on Central Boulevard in Busan metropolitan city and analyzed the relationship between the proper stopping rate and bus stop operating conditions such as the length of berth, the distance from the front line of berth to bus shelter and so on. The analysis results show that the proper stopping rate is 45.82 % and the rates are closely related to each bus stop operating condition. Therefore, it is highly recommended that the front line of berth should be located parallel to bus shelter for improving the safety of bus passengers. In addition, it is suggested that the length of berth should be longer than 15m and the pavement marking of berth be redesigned with dash lines to take account of buses' entering and leaving the berth.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.69-74
• /
• 2009

We propose the novel Hybrid bus arbitration policy that prevents starvation phenomenon presented in fixed priority and effectively assigns a priority to each master by mixing fixed priority and round-robin arbitration policies. The proposed arbitration policy and the others were implemented through Verilog and mapped the design into Hynix 0.18um technology and compared about gate count and design overhead. In the results of performance analysis, we confirm that our proposed policy outperforms the others in the aspect of design complexity, timing margin, bus utilization, starvation prevention, request cycle and so on.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.57-62
• /
• 2009

This paper deals with the optimal design of a shield plate in order to minimize Extremely-Low-Frequency(ELF) magnetic fields generated from three-phase bus bars. Combining an evolutionary strategy with a 3D finite element analysis tool, the main dimensions of the shield plate are sought out. The optimization procedure consists of two separated design stages to take into account all foreseen structures of the plate. In the first stage, the basic dimensions of the plate are optimized including the distance between the plate and the bus bars. Then the usefulness of the additional structures such as a slit and fillet is investigated in the second stage. Finally the optimum design of the shield plate is suggested from the viewpoint of the shielding effectiveness and manufacturing cost.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.518-521
• /
• 2018

As public transportation use increases, studies are being conducted to consider user convenience using IoT data collected via the bus information system. A low-floor bus means a bus that is designed to be 20 cm lower than a normal bus and can be wheelchair-accessible. However, the system in which the transportation weak is provided to use the low-floor bus is less than the system provided to the general user. In order to use the low-floor bus smoothly, as in the case of the general user, the service system for the weak driver is needed. In this paper, a low - floor bus reservation system is designed to provide a service for low - rise bus users to conveniently use low - floor buses.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.2
• /
• pp.288-299
• /
• 1993

This paper proposes the new bus protocol in the tightly coupled multiprocessor system. The bus protocol uses the pipelined data transfer and block transfer scheme to increase the bus bandwidth, The bus also has the independent transfer lines for the address and data respectively, and it can transfer the data up to maximum 264 Mbytes /sec. This paper also models the multiprocessor system where each processor boards have the private cache. Simulation evaluates the bus and system performance according to hit ratio of the reference data in cache memory, In the case of using this bus, the bus is evaluated not to be saturated when up to 10 processor boards are connected to the bus. As for up to 4 memory interleavng, the performance increases linearly.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.221-226
• /
• 2008

In this paper, with analysis of the public facilities using solar panel, typical bus shelters are investigated. The present status of these facilities in the field of structural design, the meaning of the bus shelters in the part of structural engineering and domestic and foreign examples are analysed. Finally, we indicate some problems in the domestic bus shelters using solar panel and suggest new ideas.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.942-945
• /
• 2002

A garter spring, which is a long. special, close-coiled extension spring with its ends joined to form a ring, is used in connection between vacuum circuit breaker and bus bar in switchgear. To carry short-time current and resist welding at the contact surface in the connection, the garter spring must transmits an uniform contact force to the contact surface through the contact chips arranged in the circumference of bus bar. In this paper, the system for measurement of the contact force by the garter spring is developed. Using the developed measurement system, the design of the connection structure including the garter spring is reviewed to obtain the uniform contact forces in all of contact chips.