• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.37-44
• /
• 1998

Lean burn combustion is an important concept for improving the fuel consumption and exhaust emissions. However, the lean burning is associated with increased cycle-to-cycle combustion variations due to the ignition instabilities and redu- ced flame propagation rates. Engine stability under lean mixture conditions could be improved by increasing flame speed through enhanced flow characteristics and by securing ignitability with improvement of ignition systems. The effects of flow motion and ignition characteristics on the combustion performances were investigated in a 4-valve SI engine. Flow motions of tumble-swirl were varied with a swirl control valve attached at the inlet ports, while ignition energy and its distribution were controlled in a high -frequency ignition system by changing spark duration and spark frequency. The improvement of lean burn performance by the optimum flow motion and ignition characteristics is discussed.

• Journal of Energy Engineering
• /
• v.18 no.3
• /
• pp.156-162
• /
• 2009

Cylinder-pressure based combustion analysis provides a mechanism through which a combustion researcher can understand the combustion process. This paper was to identify the most significant sources of cycle-to-cycle combustion variability in a spark ignition engine at idle. To analyse the cyclic variation in the test engine, the burn parameters are determined on a cycle-to-cycle basis through analysis of the engine pressure data. The burn rate analysis program was used in the analysis of the data. Burn parameters were used to determine the variations in the input parameter-i.e., fuel, air, residual mass, and so on.

• Journal of Radiation Protection and Research
• /
• v.25 no.2
• /
• pp.99-107
• /
• 2000

Through the results of off-gas analysis at 3 sampling points in Plasma Arc Melting vitrification pilot plant, it was evaluated the partitioning of spiked materials in off-gas and the decontamination characteristic of off-gas treatment system. Spiked materials are hazard_us heavy metals(Pb, Cd, Hg), radioactive surrogate(Co, Cs) and radioactive materials($^{60}Co,\;^{137}Cs$). Through the Trial burn tests, Decontamination factor of spiked materials in off-gas treatment system is calculated.

• Korean Chemical Engineering Research
• /
• v.44 no.1
• /
• pp.87-91
• /
• 2006

Polysaccharides extracted from mushroom have been most commonly used to enhance the immune system. Also polysaccharides maintaining the moisture extent on epidermal tissue have an effect on the removal of necrotic tissue and the restoration of epidermal tissue through enhancing the immune system at skin layers. In this work, polysaccharides were from Schizophyllum commune studied about the burn and wound healing activity in the epidermal tissue on rats through in vivo experiment and hematological values. And antibacterial activities were examined using pathogenic microorganisms causing the secondary inflammation.

• Journal of Distribution Science
• /
• v.17 no.11
• /
• pp.81-92
• /
• 2019

Purpose: The salesperson, the core of the operating activities, plays the role of connecting the inside and outside of the company, representing the company to the consumer and identifying and responding to the customer's needs. The department store industry is the most representative retail industry in South Korea, and competition among its peer group and industry is intensifying, requiring differentiated service sales activities and performance from its employees. This study divided the sales force system into activity control(process-oriented control) and output control(performance-oriented control) and verified the differential impact on the job attitude of the salesperson (e.g., job satisfaction and burn-out), respectively. In addition, the effect of job satisfaction and burn-out of the salesperson on the job performance were checked. Research design, data, and methodology: The survey was conducted on 200 sales people working at five branch stores of Hyundai department store in Seoul, and 194 of them were analyzed. The reliability and validity of the variables were analyzed and hypotheses were verified through the SEM. Results: Results have shown that activity control has a greater impact on burn-out compared to output control, and output control has a greater impact on job satisfaction compared to activity control. It has been shown that the salesperson's burn-out does not affect sales performance, but that job satisfaction has a positive effect on sales performance. Conclusions: This study examines the effect of sales force management system such as activity control and output control, on the job attitude and sales performance in department stores. According to the results of this research, each of two control systems have a discriminatory effect on the job attitude variables. For the sales managers of department store, it is recommended to increase the efficiency of sales management by increasing the use of outcome control compared to activity control.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.421-426
• /
• 2010

Purpose: Patients with serious burns are prone to chondritis due to lack of soft tissue in the auricle, which can cause severe defects in the auricular morphology. In addition, skin damage occurs frequently in the vicinity of post-burn wounds, presenting difficulties in reconstruction surgery. An auricular reconstruction has functional and cosmetic significance. The aim of this study is to develop appropriate reconstruction methods for auricular defects. Methods: Thirty seven patients, who were treated for auricular defects from 2005 to 2009, were enrolled in this study. A local flap, multiple regional flaps and cartilage framework with or without a temporal fascial flap were applied in reconstruction surgery according to the location of the auricular defect. Results: The age of the subjects ranged from 11 to 56. Some subjects had defects that cover more than half of the helical rim with most exhibiting post-burn scars in the vicinity, for whom a multiple regional flap was used. A single use of a tubed flap was sufficient for subjects with defects that covered less than half of the helical rim. A regional flap was also used for reconstruction in subjects with defects covering both the helical rim and antehelix. Conclusion: Achieving satisfactory results from the skin flaps and skin grafts for post-burn auricular defects in both functional and cosmetic aspects is a difficult task. Therefore, selecting an appropriate surgical method through proper diagnosis of the auricular defect and the state of the available skin in the vicinity is essential.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1299-1308
• /
• 2023

Forest fires are becoming more frequent and larger around the world due to climate change. Remote sensing such as satellite images can be used as an alternative or assistance data because it reduces various difficulties of field survey. Forest burn severity (differenced normalized burn ratio, dNBR) is calculated through the difference in normalized burn ratio (NBR) before and after a forest fire. The images used in the NBR formula are based on Landsat's near-infrared (NIR) and short-wavelength infrared (SWIR) bands. South Korea's satellite images don't have a SWIR band. So domestic studies related to forest burn severity calculated dNBR using overseas images or indirectly using the normalized difference vegetation index (NDVI) using South Korea's satellite images. Therefore, in this study, dNBR was calculated by substituting the mid-wavelength infrared (MWIR) band of Kompsat-3A (K3A) instead of the SWIR band in the NBR formula. The results were compared with the dNBR results obtained through Landsat which is the standard for dNBR formula. As a result, it was shown that dNBR using K3A's MWIR band has a wider range of values and can be expressed in more detail than dNBR using Landsat's SWIR band. Therefore, it is considered that K3A images will be highly useful in surveying burn areas and severity affected by forest fires. In addition, this study used the K3A's MWIR band images degraded to 30 m. It is considered that much better results will be obtained if a higher-resolution MWIR band is used.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.1
• /
• pp.1-9
• /
• 2000

In the present study, the IDI-type constant volume chamber, which utilizes the indirect injection stratified charge method, is used to solve several problems including misfires and cycle-variations caused by unstable initial ignitions. A subchamber has been used to make an ignitable mixture under the low mean equivalence ratio. After burned in the subchamber, the flame jet getting through the passage hode enters the main chamber and burns the lean charge. There are many factors which affect the combustion characteristics of the indirect injection stratified engine. The passage hole angle is the most important since it determines the direction of flame flows into the main chamber. In the present study, we measured the combustion pressure, and the wall temperature, and computed the heat flux through the cylinder wall in order to understand the combustion characteristics depending on passage hole angle and the equivalence ratio.

• Experimental and Molecular Medicine
• /
• v.50 no.12
• /
• pp.3.1-3.14
• /
• 2018

Type 1 diabetes mellitus (T1DM) is a pathological condition associated with osteopenia. $WNT/{\beta}$-catenin signaling is implicated in this process. Trabecular and cortical bone respond differently to $WNT/{\beta}$-catenin signaling in healthy mice. We investigated whether this signaling has different effects on trabecular and cortical bone in T1DM. We first established a streptozotocin-induced T1DM mouse model and then constitutively activated ${\beta}$-catenin in osteoblasts in the setting of T1DM (T1-CA). The extent of bone loss was greater in trabecular bone than that in cortical bone in T1DM mice, and this difference was consistent with the reduction in the expression of ${\beta}$-catenin signaling in the two bone compartments. Further experiments demonstrated that in T1DM mice, trabecular bone showed lower levels of insulin-like growth factor-1 receptor (IGF-1R) than the levels in cortical bone, leading to lower $WNT/{\beta}$-catenin signaling activity through the inhibition of the IGF-1R/Akt/glycogen synthase kinase $3{\beta}$ ($GSK3{\beta}$) pathway. After ${\beta}$-catenin was activated in T1-CA mice, the bone mass and bone strength increased to substantially greater extents in trabecular bone than those in cortical bone. In addition, the cortical bone of the T1-CA mice displayed an unexpected increase in bone porosity, with increased bone resorption. The downregulated expression of WNT16 might be responsible for these cortical bone changes. In conclusion, we found that although the activation of $WNT/{\beta}$-catenin signaling increased the trabecular bone mass and bone strength in T1DM mice, it also increased the cortical bone porosity, impairing the bone strength. These findings should be considered in the future treatment of T1DM-related osteopenia.

• Journal of Welding and Joining
• /
• v.16 no.5
• /
• pp.134-141
• /
• 1998

In this study, a fillet size for bending fatigue strength of one side fillet welded T-joint, used in box type girder and other welding structure, was investigated by bending fatigue test with or without edge preparation and burn through, with variation of joint shape. As a result, the following conclusions were obtained. (1) In one side fillet welded T-joint, the larger the leg length, the greater the bending fatigue strength. The increase in bending fatigue strength. (2) One side filet welded T-joint with edge preparation showed higher bending fatigue strength than that with twofold-large leg length and without edge preparation. (3) In one side fillet welded T-joint without edge preparation, both manual welding and automatic welding were carried out with same condition. In this case, automatic welding shoed deeper penetration and more increased horizontal leg length than manual welding, so that automatic welding offers grater bending fatigue strength. (4) For one side fillet welded T-joint without edge preparation, the ratio(h/t) of the leg length (h) and the main plate thickness (t) in which toe crack can occur was 1.2 over. (5) In one side fillet welded T-joint with edge preparation, the burn through led to reduced bending fatigue strength. However, this bending fatigue strength was higher than that of one side fillet welded T-joint without edge preparation and with a larger leg length.