• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.1007-1014
• /
• 2020

IMO(International Maritime Organization) continues to strengthen environmental regulations on exhaust gases such as CO2, NOx, SOx. As for sulfur oxides, from 1 January 2020, all ships on international voyages must use fuel with a sulfur content of 0.5% or less. Or, it is obligatory to use an exhaust gas treatment device that has the same effect. Shipping companies are using low-sulfur oil, replacing them with LNG fuel, or installing scrubbers that suppress sulfur oxide emissions. In the case of ships using bunker C oil, the load on the engine is lower when entering and departing, so the exhaust gas pressure is lowered and the scrubber cannot be properly utilized. Therefore, diesel oil with low sulfur content is used when entering and leaving the coast. When diesel oil is used, exhaust gas is directly discharged through the control system and piping system, and when bunker C oil is used, sulfur oxides are reduced by scrubbers through other control systems and piping systems to discharge exhaust gas. Accordingly, a company has developed a system called a three-way damper valve that can control exhaust gas emissions while integrating these two control systems and piping systems into one. In this study, the control characteristics of the integrated exhaust gas control system and structural safety against external loads in a high-temperature exhaust gas environment were reviewed.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.105-110
• /
• 1999

The elementary experiment was performed to develop the emulsified fuel production system using pressure injection nozzle in this study. The stabilities and characteristics of emulsified fuel which is produced through direct spray of water via pressure injection nozzle into oil are examined. To understand performance of emulsion production, stabilities of emulsified fuel which is made by adding water to the mixed fuel of Bunker-C and 10 $^{\sim}$ 50 vol% of heating oil were investigated. According to volume ratios of surfactant in heating oil the stability and SMDs were measured

• 한국환경과학회지
• /
• 제23권6호
• /
• pp.1067-1074
• /
• 2014

Life Cycle Assessment(LCA) has been carried out to evaluate the environmental impacts of glass bottle recycle. The LCA consists of four stages such as Goal and Scope Definition, Life Cycle Inventory(LCI) Analysis, Life Cycle Impact Assessment(LCIA), and Interpretation. The LCI analysis showed that the major input materials were water, materials, sand, and crude oil, whereas the major output ones were wastewater, $CO_2$, and non-hazardous wastes. The LCIA was conducted for the six impact categories including 'Abiotic Resource Depletion', 'Acidification', 'Eutrophication', 'Global Warming', 'Ozone Depletion', and 'Photochemical Oxidant Creation'. As for Abiotic Resource Depletion, Acidification, and Photochemical Oxidant Creation, Bunker fuel oil C and LNG were major effects. As for Eutrophication, electricity and Bunker fuel oil C were major effects. As for Global Warming, electricity and LNG were major effects. As for Ozone Depletion, plate glasses were major effects. Among the six categories, the biggest impact potential was found to be Global Warming as 97% of total, but the rest could be negligible.

• 한국연소학회지
• /
• 제5권1호
• /
• pp.81-89
• /
• 2000

An experimental study has been carried on single fuel droplets of water-in-light oil emulsions in an electric furnace to elucidate the dominant factor for the occurrence of micro-explosions. The tests were carried out by changing the following four parameters; the surfactant, the ratio of water to light oil, ambient temperature in electric furnace, and four kinds of fuels having different viscosity(light-oil, kerosene, iso-octane, bunker fuel). The result shows that micro-explosion phenomena is dominated without surfactant and below 30% of water content. Explosion-time is affected by ambient temperature and viscosity of used fuel.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권7호
• /
• pp.1080-1088
• /
• 2008

This paper addresses some concerns faced by the shipping industry nowadays. Initially, the environmental issues were resolved and stricter regulations are now being implemented with regards to the exhaust gas, specifically nitrogen oxides (NOx) and sulfur oxides (SOx), emitted from ships. Secondly, with the increasing and unstable cost of fuel oils in the world market, it has become almost a necessity to explore on a new alternative fuel. Hence, this study was conducted. An experiment was carried-out on a fishing survey vessel with the main engine (M/E) and generator engine (G/E) operated on expensive marine gas oil (MGO). During the experiment, two pre-refinery systems were installed and different fuel oil samples were employed for the M/E and the G/E. Furthermore, the NOx emission and soot concentration were monitored and verified. The results confirmed the compatibility of some fuel oil types to the engines and meeting the emission standards. MDO, MF15 and Bunker A can be used in place of MGO for the engines(M/E, G/E).

• 자원ㆍ환경경제연구
• /
• 제16권2호
• /
• pp.239-273
• /
• 2007

해외 판매 BC유의 국제벙커링과 수출의 경우에는 거의 유사한 품질에도 불구하고 서로 다른 가격으로 판매되고 있으며, 이 두 시장에서의 가격 차이는 2002년 이후에 크게 확대되는 모습을 보이고 있다. 실증 분석을 통하여 한국에서의 벙커링 가격과 수출 가격의 차이가 2002년 6월을 기점으로 구조적인 변화가 발생하였을 가능성이 있으며, 2002년 6월까지는 두 가격의 차이를 설명하지 못하였던 싱가포르에서의 벙커링과 연료유 가격 차이가 2002년 7월부터는 한국에서 두 가격의 차이를 설명하는 요인으로 나타나고 있음을 확인하였다. 또한, 미래 유가 상승을 기대하게 하는 전기 시차의 국제 원유가격의 상승률도 한국에서 벙커링과 수출 가격의 차이를 설명하는 요인임을 알 수 있었다. 이러한 추정 결과는 한국에서의 국제벙커링과 수출의 가격 차이가 가격차별에 의해서 설명될 가능성을 배제하지는 않는 결과이다.

• 플랜트 저널
• /
• 제12권3호
• /
• pp.39-45
• /
• 2016

기존 벙커C유에 바이오중유 혼합비율을 50%, 80% 및 100%로 변화시키면서, 발전기 출력 320 MW, 380 MW 일 때 각각의 시간당 연료소비량을 측정하였다. 벙커C유 전소일 때의 시간당 연료소비량과 비교한 결과 발전기 출력 320 MW에서 바이오중유 혼합비율이 50%부터 100%까지 높아짐에 따라 시간당 연료소비량이 11.0%에서 20.4%까지 증가함을 알 수 있었다. 또한 발전기 출력 380 MW에서는 바이오중유 혼합비율이 50%부터 100%까지 높아짐에 따라 시간당 연료소비량이 12.0%에서 21.1%까지 증가함을 알 수 있었다. 더 나아가 측정된 시간당 연료소비량과 발전기 출력, 연료의 고위발열량을 이용하여 발전효율을 산출하였고, 발전기 출력 320 MW, 380 MW에서 모두 바이오중유 혼합비율이 50%부터 100%까지 높아지면서 발전효율은 감소함을 확인하였다.

• 분석과학
• /
• 제9권2호
• /
• pp.168-178
• /
• 1996

근적외선과 $^{13}C$-핵자기 공명 분광학에 의한 석유유분(경유, 벙커-C유, 윤활기유)의 분자구조를 조성(방향족, 나프텐, 파라핀), 방향족(벤젠-핵과 결합된 알킬기), C2(메틸렌) 탄소원자 %, 알킬기 내에서의 $C_{\alpha}$ 와 $C_{\beta}$탄소원자 %, 그리고 파라핀(가지형, 직선형)으로 세분화하여 분석, 비교 하였다.

• 대한조선학회지
• /
• 제8권1호
• /
• pp.95-102
• /
• 1971

Since the fuel oil of the bunker C grade, which is commonly burnt in the large marine diesel engine, causes the corrosive wear of cylinder liners and piston rings, a cylinder oil of high alkality is frequently used to prevent the wear. This practice, however, brings us an another problem to cause the abnormal wear. In this study the author made an investigation of the mechanism of the abnormal wear by the experiments surveying the influences of the alkality of a cylinder oil and the temperature of cylinder wall on the wear. The major results obtained from this study are as follows; A cylinder oil of low alkality is clearly effective for the preventation of the abnormal wear. Therefore, it is recommended that, prio to using a cylinder oil of high alkality, a cylinder oil of low alkality should be used until bringing an end to the initial wear. It is also observed that the abnormal wear depends largely on the temperature of the cylinder wall, that is, the higher the temperature goes up the severer the wear grows.

• Tribology and Lubricants
• /
• 제28권5호
• /
• pp.233-239
• /
• 2012

The engine of a large ship operates under wet conditions using a fuel such as bunker C oil, which includes sulfur and many impurities. A cylinder liner made of cast iron is very susceptible to damage such as scuffing on the surface. This scuffing can reliably be attributed to the destruction of the oil film and the corrosion wear caused by water and sulfur included in the fuel, along with abrasion impurities and poor lubricants. In this study, a reciprocating friction and wear test was carried out with a cast iron specimen, which was used to simulate an engine cylinder in a corrosive environment. Base-oil and stirred oil containing distilled water, NaCl solution, and dilute sulfuric acid were used as lubricants. The friction surface was analyzed using a microscope and EDAX, and the friction coefficient was measured using a load-cell under each experimental condition. We then attempted to investigate the damage to the cylinder liner using the results.