• 제목/요약/키워드: Bunching

검색결과 39건 처리시간 0.02초

버스몰림운행 지속시간 추정모형 개발에 관한 연구 (A Study on Development of Bus Bunching Duration Model)

  • 김은경;노정현;류시균
    • 대한교통학회지
    • /
    • 제28권6호
    • /
    • pp.85-97
    • /
    • 2010
  • 본 연구는 정류소에서 여러노선의 버스가 동시에 몰려들어오는 버스몰림운행의 실태를 파악하고 이로 인해서 야기되는 문제점을 개선하기 위하여 버스몰림 운행지속시간 모형을 추정하고 버스몰림운행에 영향을 미치는 요인을 분석하였다. 버스몰림지속시간의 관측치를 대상으로 8개의 지속시간에 대한 분포를 검토하여 가장 적합도가 높게 나타난 weibull 분포를 가정한 모형을 개발하였다. 18개 영향변수를 검토하였으며 정차면수, 정차면수당 노선수, 노선당 최대 승하차인원을 설명변수로 하는 버스몰림운행 지속시간 모형을 개발하였다. 중앙버스전용차로(도봉미아로)와 가로변 전용 및 일반차로(통일의주로)에 대한 모형을 각각 도출하여 비교하였다. 그 결과, 도봉미아로의 몰림지속시간은 통일의주로에 비해 교통량에 대한 영향을 많이 받으며, 통일의주로는 도봉미아로에 비해 정차면수와 정차면수당 노선수, 노선당 최대 승하차인원에 많은 영향을 받는 것으로 나타났다. 개발된 모형을 토대로 버스몰림운행 현상의 완화방안을 제시하였다.

A NON-MARKOVIAN EVOLUTION MODEL OF HIV POPULATION WITH BUNCHING BEHAVIOUR

  • Sridharan, V.;Jayshree, P.R.
    • Journal of applied mathematics & informatics
    • /
    • 제5권3호
    • /
    • pp.785-796
    • /
    • 1998
  • In this paper we propose a model of HIv population through method of phases with non-Markovian evolution of immi-gration. The analysis leads to an explicit differnetial equations for the generating functions of the total population size. The detection process of antibodies (against the antigen of virus) is analysed and an explicit expression for the correlation functions are provided. A measure of bunching is also introduced for some particular choice of parameters.

ANALYSIS OF OCEAN WAVE BY AIRBORNE PI-SAR X-BAND IMAGES

  • Yang, Chan-Su;Ouchi, Kazuo
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
    • /
    • pp.240-242
    • /
    • 2008
  • In the present article, we analyze airborne Pi-SAR (Polarimetric-Interferometric SAR) X-band images of ocean waves around the Miyake Island at approximately 180 km south from Tokyo, Japan. Two images of a same scene were produced at approximately 40 min. interval from two directions at right angles. One image shows dominant range travelling waves, but the other image shows a different wave pattern. This difference can be caused by the different image modulations of RCS and velocity bunching. We have estimated the dominant wavelength from the image of range waves, and from the wave phase velocity computed from the dispersion relation (though no wave height data were available), the image intensity is computed by using the velocity bunching model. The comparison of the result with the second image at right angle strongly suggests the evidence of velocity bunching.

  • PDF

버스서비스 개선을 위한 버스몰림지표 개발 및 적용 (The Development and Application of Bus Bunching Indices for Bus Service Improvement)

  • 김은경;노정현;김영찬
    • 한국ITS학회 논문지
    • /
    • 제7권6호
    • /
    • pp.1-11
    • /
    • 2008
  • 버스는 개인교통수단에 비해 대량수송이 가능한 경제적, 친환경적 교통수단으로 인식되면서 서비스 개선을 위한 다양한 정책이 추진되고 있다. 특히, BMS(Bus Management Systems)와 같은 첨단대중교통체계의 수립은 버스운행에 대한 효율적 관리를 통한 운행서비스를 높일 수 있는 방안으로 활용되고 있다. 현재 버스운행관리는 대부분 정시배차와 같은 정시성과 관련한 신뢰성 관리에 초점을 두고있다. 본 연구에서는 정류장에서 버스몰림 운행관리의 필요성과 몰림현상에 대해 설명하고 정차면수 기준과 평균버스도착율을 기준으로 한 2가지 유형의 버스몰림지표를 개발하였다. 버스몰림지표는 서울시 교통정보서비스 (TOPIS, Transportation & Information Service)의 BMS 버스운행이력 자료를 이용하여 중앙버스전용차로인 도봉미아로와 일반차로인 통일의주로에 적용하였다. 분석결과, 도심에 가까운 정류소가 외곽의 정류소에 비해 몰림운행되는 것으로 나타났으며, 시간대별로는 오전 첨두시간대에 버스몰림이 심각한 것으로 분석되었다. 또한, 버스정시성 지표와 비교함으로서 보완지표로서 활용성을 제시하였다. 중앙전용차로와 일반차로의 몰림운행 비교를 통한 중앙전용차로의 확대시 참고자료로 이용될 수 있을 것이며, 정차면수(Number of Berth)와 같은 버스정류소 규모 및 노선배치에 참고자료로 활용될 수 있음을 제시하였다.

  • PDF

광자쌍의 뭉침현상이 단일계수에 미치는 영향 (Effect of two-photon spatial bunching on single photon detection rates)

  • 김헌오;신하림;박구동;김태수
    • 한국광학회지
    • /
    • 제14권6호
    • /
    • pp.573-577
    • /
    • 2003
  • Hong-Ou-Handel 간섭계를 이용한 광자쌍의 4차 간섭실험에서 두 광자의 뭉침이 단일계수에 미치는 영향을 조사하였다. 검출기의 단일광자 시간 분해능보다 짧은 시간간격으로 두 광자가 검출기에 입사할 때 하나의 검출기에서 측정되는 단일계수가 현저하게 줄어드는 변화를 확인하였다.

Retrieval of Spherical Ocean Wave Parameters Using RADARSAT-2 SAR Sensor Observed at Chukk, Micronesia

  • Chaturvedi, Sudhir Kumar;Yang, Chan-Su;Song, Jung-Hwan;Ouchi, Kazuo;Shanmugam, P.
    • 대한원격탐사학회지
    • /
    • 제27권3호
    • /
    • pp.213-223
    • /
    • 2011
  • The purpose of this study is to estimate the spherical wave parameters that appears in synthetic aperture radar (SAR) image acquired over the coast of Chukk, Micronesia. The retrieval of ocean wave parameters consists of two main stages: the first is to determine the dominant wavelengths by Fast Fourier Transform (FFT) over 16 sub-image areas and the second is to estimate wave slopes and heights using dispersion relationship under various water wave conditions. It is assumed that the spherical waves are linear and progressive. These type of waves have the range and azimuth components traveling in radial directions. The azimuth travelling waves are more affected by the velocity bunching mechanism and it is difficult to estimate the wave parameters for these affected areas in SAR imagery. In order to compensate these effects, the velocity bunching ratio (VBR) based on modulation transfer function (MTF) was compared with the intensity ratio for neighbor area in the radial direction in order to assign the spherical wave properties for azimuthally travelling waves. Dispersion relation provides the good estimates for the wave heights for all the selected sub-image areas in the range of 1m to 2m. VBR based on MTF was found to be 0.78 at wave height of 1.36m, while the intensity-based VBR was 0.69 which corresponds to the height of 1.75m. It can be said that the velocity bunching accounts for azimuthally travelling spherical waves and the difference results from the sea-bottom effects.

콤바인 예취장치의 절단특성에 관한 연구(II) -2배형, 2중형 칼날의 절단특성- (Cutting-Pattern and Cutting Characteristics of the Reciprocating Cutter-bar of Combine Harvester(II)- Cutting Characteristics of the Low-Cutting Type and Double Cutting Type Reciprocating Knives-)

  • 이홍주;김홍윤;홍종호;이성범
    • Journal of Biosystems Engineering
    • /
    • 제20권1호
    • /
    • pp.13-21
    • /
    • 1995
  • This study was conducted to investigate the cutting mechanism of reciprocating knife of combine harvester. The cutting operation of reciprocating knife with the arrangement of the low-cutting and the double-cutting was demonstrated through cutting pattern diagram which was drawn by computer graphics. Various kinds and dimensions of reciprocating knives were analyzed using the developed program. The results are summarized as follows (1) The low-cutting type reciprocating knife was represented similar cutting characteristics to the standard type, but the maximum stalk-deflection was decreased as 1/2 level of the standard type. And the first ledger plate should be designed shorter than the second ledger plate. (2) The bunching area and the maximum stalk-deflection for the double cutting knife almost were not changed since cutting velocity ratio of 0.6, but the secondary cut were occurred at ratio of 0.8 and increased rapidly over these ratio. (3) The double cutting knife was recommended for the high speed combine, because its bunching area and the maximum stalk-deflection were decreased as 1/2 level of the standard type. (4) In order to maintain the proper cutting mechanism characterized by the bunching area, the maximum stalk-deflection and the secondary cutting length etc., the adequate cutting velocity at forward speed of 0.5㎧ to 1.2㎧ was from 0.3㎧ to 0.96㎧ for the double cutting knives.

  • PDF

Real time observation of reconstruction transition on GaAs (111)B vicinal surface by scanning electron microscopy

  • Ren, Hong-Wen;Tatau Nishinaga
    • 한국결정성장학회:학술대회논문집
    • /
    • 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
    • /
    • pp.19-37
    • /
    • 1996
  • Scanning electron microscopy (SEM) has been applied to observe directly the {{{{ SQRT { 19} }}}}${\times}${{{{ SQRT { 19} }}}} and (1${\times}$1)HT reconstructions and the transition associated step bunching on the GaAs (111)B surfaces under As pressure. Close to the transition point, {{{{ SQRT { 19} }}}}${\times}${{{{ SQRT { 19} }}}}an d (1${\times}$1)HT reconstructions are observed in dark and bright domains by SEM and determined by micro-probe reflection high-energy electron diffraction (${\mu}$-RHEED). The reconstruction diagram shows hyster-esis. The stepped surface morphology during the reconstruction transition was unstable. Heavy step bunching with rough macrostep edges was observed.

  • PDF

Pi-SAR X-BAND 영상에 의한 파랑 이미징 메커니즘 연구 (OCEAN WAVE IMAGING MECHANISMS BY AIRBORNE SAR: Pi-SAR X-BAND)

  • Yang, Chan-Su
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2008년도 춘계학술대회 논문집
    • /
    • pp.176-179
    • /
    • 2008
  • In the present article, wave imaging mechanisms were investigated using airborne Pi-SAR (Polarimetric-Interferometric SAR) X-band VV images of ocean waves around the Miyake Island at approximately 180 km south from Tokyo, Japan. Two images of a same scene were produced at approximately 20 min. interval from two directions at right angles. One image shows dominant range travelling waves, but the other image shows a different wave pattern. This difference can be caused by the different image modulations of RCS and velocity bunching. In this study, 18 subimages are extracted, and the directional wave spectra are compared to each other of the two different areas.

  • PDF

최저임금 인상이 근로자 고용규모에 미치는 영향: "경제활동인구조사" 자료를 이용한 분석 (Effects of Minimum Wage Increases on the Volume of Waged Employment: Evidence from the Economically Active Population Survey)

  • 강창희
    • 노동경제논집
    • /
    • 제44권1호
    • /
    • pp.73-101
    • /
    • 2021
  • 본 논문은 Cengiz et al.(2019)이 제안한 집군(集群)추정법을 "경제활동인구조사" 자료에 적용해 2009~2019년 기간 최저임금 인상이 근로자 고용규모에 미친 영향을 추정한다. 집군추정법은 강창희(2020)에서도 적용된 방법으로서 최저임금 인상에 따른 시간당 임금 분포의 변동을 활용하고, 한국과 같이 전국적으로 동일한 최저임금을 채택하는 노동시장에 쉽게 적용될 수 있다. 추정 결과에 의하면, 2009~2019년 기간 동안 연도별 최저임금의 인상은 고용규모에 부정적인 영향을 미쳤다. 최저임금이 10% 인상되면 근로자 전체 고용규모는 약 1.42~1.74% 정도 감소하는 것으로 추정된다. 최저임금 인상의 부정적 고용효과는 근로자 집단별로, 사업체 특성별로 서로 다르다. 최저임금 근로자의 비중이 높은 집단에서 부정적인 효과가 더 크다. 향후 최저임금 인상 폭을 결정하는 과정에서 최저임금 인상으로 인한 부정적인 고용효과를 충분히 고려할 필요가 있다.

  • PDF