• Journal of Korean Society of Steel Construction
• /
• v.13 no.4
• /
• pp.381-393
• /
• 2001

The current traffic situation in Korea can be described as rapid change in traffic volume and diversity in vehicle size from compact cars to large trucks. W-beam barrier most widely used in Korea was found not to satisfy the stiffness requirement for the Koran impact condition of 14 ton-60Km/h-15deg. and it was too stiff for small vehicles impacting with more realistic speed to satisfy the safety of vehicle occupants. To develop a guardrail system satisfying the two contradicting goals, a thrie-beam guardrail system, which had the beam thickness of 3.2mm and rubber cushions, was conceived. Even though the height of the thrie-beam(450mm) is increased by 100mm as compared to that of W-beam (350mm), there was only 2% increase in the weight of the thrie-beam. The new thrie-beam barrier system could contain more wide range of vehicle bumper heights, and showed better performance in the viewpoint of stiffness and energy absorbing capability than the W-beam system. The impact performance was evaluated from a crash test. The developed thrie-beam guardrail system satisfied all applicable criteria for NCHRP 350 test designation 3-10.

• Journal of Distribution Science
• /
• v.10 no.2
• /
• pp.7-17
• /
• 2012

The aim of this study is to empirically explore micro and macroeconomic factors affecting the Pakistani sugar industries and searching the energy potential of this industry, through the survey of literature. The empirical part has been explored by employing Vector Autoregression (VAR), Granger Causality tests and simultaneous equation models through quarterly data for the period of 1991q2-2008q4. The study also aims to devise policies for the development of sugar industries and identify its growing importance for the energy sector of Pakistan. Empirical tests applied on the domestic prices of sugar, domestic interest rates, and exchange rate, productive capacities of sugar mills, per capita income, world sugar prices on cultivable area and sugar production reveal very useful results. Results reveal an improvement of productive capacity of the sugar mills of Pakistan on account of increasing crushing capacity of this sector. Negative effect of rising wholesale prices on the harvesting area was also observed. Profit earnings of the sugar mills significantly increase with the rise of sugar prices but the system does not exist for the farming community to share the rising prices of sugar. The models indicate positive and significant effect of local prices of sugar on its volume of import. Another of the findings of this study positively relates the local sugar markets with the international prices of sugar. Additionally, the causality tests results reveal exchange rate, harvesting area and overall output of sugarcane to have significant effects on the local prices of sugar. Similarly, import of sugar, interest rate, per capita consumption of sugar, per capita national income and the international prices of sugar also significantly affect currency exchange rate of Pakistani rupee in terms of US$. The study also finds sugar as an essential and basic necessity of the Pakistani consumers. That is why there are no significant income and price effects on the per capita consumption of sugar in Pakistan. All the empirical methods reiterate the relationship of variables. Economic policy makers are recommended to improve governance and management in the production, stock taking, internal and external trading and distribution of sugar in Pakistan using bumper crop policies. Macroeconomic variables such as interest rate, exchange rate per capita income and consumption are closely connected with the production and distribution of sugar in Pakistan. The cartelized role of the sugar industries should also be examined by further studies. There is need to further explore sugar sector of Pakistan with the perspective of energy generation through this sector; cartelized sugar markets in Pakistan and many more other dimensions of this sector. Exact appraisal of sugar industries for energy generation can be done appropriately by the experts from applied sciences.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.303-309
• /
• 2013

TRAINER for Kids ($T4K^{TM}$, Myofunctional. Research Co, Australia) is a prefabricated myofunctional orthodontic appliance recommended to ClassII division1 malocclusion patients who have bad oral habits such as mouth breathing, tongue thrusting, inappropriate tongue position, thumb sucking and so on. Trainer has a soft texture and a small volume so that those advantages lead to an increase in the agreement rate of young patients of its use. This presentation is to analyze clinical efficacy of Trainer. The analysis is based on a result of regular follow-up on Class II division1 malocclusion patients who has been completely treated by Trainer in the Sanbon Dental Hospital of Wonkwang university. This case report is to present the satisfactory results gained by using Trainer on Class II patients. First, Trainer was applied in Class II malocclusion patients of mixed dentition with expected space insufficient to gain facial improvement. Second, excessive overjet, overbite were improved. Third, main effects are regarded to have been achieved by development of lingual slant of upper jaw, labial slant of lower jaw, and lower part of jaw bone.

• Korean Journal of Social Welfare
• /
• v.67 no.2
• /
• pp.33-60
• /
• 2015

The purpose of this study was to analyze the life experiences of fifteen marriage immigrant Asian women who went through running away from their home countries, marrying with Korean men, divorcing from their husbands, and coping with many difficulties after their divorce in Korean society. In order to conduct this study grounded theory methods have been employed. The central phenomenon digged out from this study was 'resistance to baffled reality' (i. e. dislocation). The causal conditions which brought about the central phenomenon were 'escaping for survival' and 'experiencing the gap between reality and expectation. 'The intervening conditions included 'getting to know the reality of their husbands,' 'losing hope,' and 'not being able to pull themselves together.' The contextual conditions consisted of 'being treated as maids,' 'becoming victims of family violence,' 'making up their minds to survive,' 'securing future life,' 'being marginalized,' and 'being aware of themselves as strangers.' The action/interaction strategies on the central phenomenon were 'building support systems,' 'building up will for new life,' and 'reconstructing social identity.'The final outcome was 'arranging places of new settlement.' The divorce was classified as four types: 'coping and growth,' 'emancipation and settling down,' 'being overwhelmed by livelihood,' and 'continuous wandering.' Based on these results, this study provided a few political and practice suggestions to prevent family violence and divorces among multi-cultural families, and also to bumper the impacts of divorce.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.284-289
• /
• 2011

Lesch-Nyhan syndrome is a disease caused by metabolic disorder of purine. General muscle stiffness and hyposomia are shown from infancy and symptoms can include involuntary or irregular movements of arms and legs, mental retardation, and compulsive self-mutilating behaviors. Self-mutilating behaviors begin at approximately the first year or sometimes at late teens. The patients bite their lips, especially lower lip, tongue, buccal mucosa, hands and fingers. Tongue and lips can be injured or mutilated in severe cases. As the patient gets older, self-mutilating behaviors become more serious and extensive and secondary infection of injured areas is possible. Periodic soft tissue damage due to self-mutilating may evolve to cancer. Medical treatment, appliance treatment, extraction of tooth and surgical operation was attempted to control self-mutilaing behaviors. We hereby report the case of child Lesch-Nyhan syndrome patient who has self-inflicted labial damage as chief complaint. When patient was treated with conservate therapy, such as removable or fixed appliance, the frequency of labial damage could be subdued and yielded favorable results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.761-768
• /
• 2013

New warheads are designed and developed to be highly lethal when used as part of ballistic missile payloads. There are many trades associated with the design of a central warhead core, mainly dealing with the projectiles or penetrators. Obviously, a payload-type configuration is very susceptible to kills from one projectile because of the high impacts required for bomblet or submunition payloads. Based on these requirements, the optimum kill vehicle configuration will have the smallest mass and relative velocity that will kill all the submunitions. The designs of the penetrator shape and size are directly related to the space and weight of the warhead. The shape, size, L/D, penetrator material, and manner in which they are inserted inside the surrounding explosive segments are critical in achieving successful penetrator design. The AUTODYN-3D code was used to study the effect of penetrator penetration. The objective of numerical analysis was to determine the penetration characteristics of the penetrator produced by hypervelocity impacts under different initial conditions such as initial velocity, shape, and L/D of the penetrator.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2000.05a
• /
• pp.38-44
• /
• 2000

To determine the optimum sowing date and nursery period in Alisma piantago in the southern area of Korea, Alisma plantago local cultivar was grown under three different sowing dates and nursery periods. The plant height, leaf width and leaf length at the area sown on the seedbed in June 30 and conducted the growing seedling in 30 days is 12.1cm, 2.5cm and 3.1cm respectively and it shows tess decrease than that of plant height, leaf width and leaf length with 12.3cm, 2.6cm and 3.2cm respectively which was sown on the seedbed in June 20 and carried out the growing seedling in 30 days, and it also shows less decrease than that of plant height, leaf width and leaf length with 15.2cm, 3.1cm and 5.2cm respectively at the area sown on the seedbed in July 10 and condected the growing seedling in the same date. The stem length, number of stems and diameter of root at the area sown on the seedbed in June 30 and conducted the growing seedling in 30 days is 31cm, 11 and 3.7cm respectively and it shows more increase than that of stem length, number of stem and diameter of and on the other hand shows tess decrease than that of stem length, number of stems and diameter of root with 30cm, 10cm, 35cm respectively which was sown on the seedbed in 30 days, and on the other hand shows less decrease than that of stem length, number of stems and diameter of root with 32cm,13cm,3.9cm respectively at the area sown on the seedbed in July 10 and conducted the growing seedling in the same date, The fresh yield of roots at the area sown on the seedbed in June 30 and conducted the growing seedling in 30 days is 431.4Kg/10a and it shows more increase of 26.9Kg than that of fresh yield of root with 410.59g110a which was sown on the seedbed in lune 20an4 carried out the growing seedling in 30 days, and it also shows more increase of 7Kg than that of fresh yield of root with 430.4Kg/10a at the area sown on the seedbed in July 10 and conducted the growing seedling in the same date. The dry yield of roots at the area on the seedbed in June 30 and conducted the growing seedling in 30 days is 351.9Kg110a which was sown on the seedbed in June 20 and carried out the growing seedling in 30 days, and it also shows more increase of 16.4Kg than that of dry yield of root with 335.4Kg110a at the area sown on the seedbed in July 10 and conducted the growing seedling in the same date. Therefore, the seedling period of proper seedbed for high yield bumper crop of Alisma plantago for exporting to Japan is June 30 and the number of days for seedling is 30 days.

• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.700-708
• /
• 1996

Electroless plating technique was utilized to flip chip bonding to improve surface mount characteristics. Each step of plating procedure was studied in terms pf pH, plating temperature and plating time. Al patterned 4 inch Si wafers were used as substrstes and zincate was used as an activation solution. Heat treatment was carried out for all the specimens in the temperature range from room temperature to $400^{\circ}C$ for $30^{\circ}C$ minutes in a vacuum furnace. Homogeneous distribution of Zn particles of size was obtained by the zincate treatment with pH 13 ~ 13.5, solution concentration of 15 ~ 25% at room temperature. The plating rates for both Ni-P and Au electroless plating steps increased with increasing the plating temperature and pH. The main crystallization planes of the plated Au were found to be (111) a pH 7 and (200) and (111) at pH 9 independent of the annealing temperature.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.1
• /
• pp.1-4
• /
• 1995

To determine the optimum sowing time and nursery period in Perilla frutescens in the southern areas of Korea, perilla frutescens cv. red Perilla local cultivar was grown under three different sowing dates and nursery periods. The blooming period of the area which was sown on the seedbed in Apr.10 and carried out the growing seedling in 30days is Aug. 12 and it is two days earlier than that of the area, Aug.14, sown on the seedbed in Apr. 20 and carried out the growing seedling in 30days of the same month and it is also six days earlier than that of the area, Aug.18, sown on the seedbed in April 30 and conducted the growing seedling in the same date. The stem lengths are 135cm,131cm and 125cm respectively and the number of branches are 26.4, 25.3 and 23.6 respectively. The fresh weight of stem and leaf at the area sown on the seedbed in Apr.10 and conducted the growing seedling in 30days with the width of leaf over 5cm in the middle of Aug. and at the beginning of Sep. is 2,476kg/10a and it shows more increase of 172kg than that of fresh weight of stem and leaf with 2,304kg/10a which was sown on the seedbed in Apr.20 and earned out the growing seedling in 30days, and it also shows more increase of 411kg than that of fresh weight of stem and leaf with 2,065kg/10a at the area sown on the seedbed in April 30 and con­ducted the growing seedling in the same date, The fresh weight of seeds are 609.5kg/10a,509.3kg/10a and 463.2kg/10a respectively and $100.2{\sim}146.3kg$ is more increased. Therefore, the seedling period of the proper seedbed for high yield bumper crop of perilla frutescens for exporting to Japan is April 10 and the number of days for seedling is 30 days.