• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.147-152
• /
• 2006

This paper presents the dynamic characteristics of MR impact damper for vehicle collision system. Various types of mechanism have been proposed for reduce transmitted force to vehicle chassis and finally protect occupants from injury. In the case of frontal collision, the bumper make main role of isolation material for collision attenuation. In this study, proposed bumper system composed of MR impact damper and structures. The MR impact damper is to adopted MR fluid which has reversible properties with applied magnetic field. MR fluid operates under flow mode with Bingham flow and bellows is used for generation of fluid flow. Mathematical model of MR impact damper incorporated with MR fluid is established. Field dependent damping force is investigated with time and frequency domain. The MR impact damper is then incorporated with vehicle crash system. The governing equation of motion of vehicle model is formulated considering occupant model. Dynamic characteristics of vehicle collision system investigated with computer simulation.

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.157-161
• /
• 2005

In the FY 2003, the number of registered vehicles in Korea reached 14 million, which is 7.7% increase from the previous year. The increase of number of vehicles has caused a lot of social problem with enormous costs. The social costs related to the vehicles includes environmental costs resulting from pollution and scraping of vehicles, those resulting from life-saving and repairing from car accidents and so on. There have been m any efforts to reduce the social costs in m any areas. As a part of the efforts, there are recent grow ing interests on the damageability & repairability in related industries. In this study, we investigated the cases of two different types of bum per stay. Futhermore, we analyzed their effects on damageability & repairability and reduction of repair cost. So we found that if the manufacturers design new cars with good damageability & repairability, then the total repair cost in crash will be reduced.

• 한국지능시스템학회논문지
• /
• 제24권6호
• /
• pp.603-608
• /
• 2014

해상교통환경에서 선박간 근접사고(Near-miss)는 양 선박이 충돌 위험코스로 서로 근접하여 충돌에 임박한 상황으로 실제 충돌은 발생되지 않은 사고를 말한다. 본 연구에서는 통항 선박들간 근접사고 산출을 위해 선박 범퍼 영역모델을 활용한 근접사고 판별식과 선박 위치 클러스터링을 통해 해역의 근접사고 산출 모듈을 제안하고자 한다. 제안된 근접사고 산출 모듈을 완도해역 통항선박 항적데이터에 적용하여 선종, 항행속력 및 조우방향 등 선박 항해 위험 요인을 평가하고자 한다.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.109-116
• /
• 2017

In this study, the optimization of the overall dimensions of an automobile bumper was investigated through CAE and experiment using the Six Sigma method and design of experiment (DOE) method, respectively. Injection pressure, injection speed, injection time, cooling time, holding time, injection temperature, and holding pressure were selected as the vital parameters affecting the overall width of product through analysis of trivial many using CAE. The optimal values were determined using the DOE method, and we analyzed the improvement by applying the optimal conditions to the production process. As a result, the mean value of the overall width was close to the target value, with a deviation of 0.05mm, and the processability and I-MR control were remarkably improved. Finally, the dimension pass rate of the product improved by 20%.

• International Journal of Automotive Technology
• /
• 제8권5호
• /
• pp.659-666
• /
• 2007

In the present study, a numerical analysis of the three-dimensional heat transfer and fluid flow for a vehicle cooling system was developed. The flow field of the engine room between the grille and radiator was analyzed. The results show that, as the airflow inlet grille angle $\alpha$ is varied from $15^{\circ}$ to $-15^{\circ}$, the air flow rate compared with $\alpha=0^{\circ}$(horizontal) changes from -11.9% to +5.1%; while the heat flux from the radiator changes from -9.2% to +4.4%. When the airflow inlet bumper angle $\beta$ is varied from $-5^{\circ}$ to $+15^{\circ}$, the heat flux from the radiator compared with $\beta=0^{\circ}$(horizontal) increases up to +4.4%. When the airflow inlet grille angle $\alpha=-15^{\circ}$ and the bumper grill angle $\beta=+15^{\circ}$, the airflow rates and heat flux compared with($\alpha=0^{\circ}$, $\beta=0^{\circ}$) can be increased to +9.5% and +7.5%, respectively. The results indicate that the optimal angles for cooling efficiency are used.

• 자동차안전학회지
• /
• 제15권1호
• /
• pp.35-44
• /
• 2023

The purpose of this study is to predict how the actual accident changes by reconstructing the accident with an Autonomous Emergency Braking system (AEB) based on the actual accident of the LTAP-OD (Left Turn Crossing Path - Opponent Direction) intersection. A virtual AEB sensor was developed, and 150 head-on collision accident reports were secured to the insurance company to reconstruct the accident. As a result of the accident type analysis, a total of 13 types of head-on collision accidents were derived, and it is the LTAP-OD intersection accident with the highest frequency. In the LTAP-OD intersection accident, the simulation was conducted by applying the virtual AEB of each vehicle, the accident rate decreased by 90% or more when the AEB of the left-turn vehicle was applied, and the accident rate decreased by 50%. In addition, the most frequent collision types in LTAP-OD accidents were the front bumper on the driver's side of a vehicle going straight and the front bumper on the passenger's side of a vehicle turning left.

• 한국항해항만학회지
• /
• 제29권1호
• /
• pp.9-15
• /
• 2005

항만의 계획 및 개발단계에서 중요한 요소 중 하나는 항로의 설계이다. 대부분의 경우 수심이 확보되어 있는 수역이라면 항로의 설계의 핵심은 항로의 배치와 항로폭의 결정이 될 것이다. 본 연구에서는 가변범퍼영역모델을 이용하여 항로를 설계하고 평가한다 이 모델은 선박의 주요명세, 선박점용이론, 선박의 속력, 선박지휘자의 조선기술과 경험을 항로설계에 반영할 수 있으며, 특히 선박의 운동 및 조종특성에 영향을 주는 외력을 정확하게 반영할 수 있다. 이를 위해 선박조종자의 선박제어와 외력 등에 의해 생성되는 선박의 동적데이터를 분석하기 위해 전기능선박조종시뮬레이터를 이용하였으며, 항로의 적정성과 안전성을 평가하기 위해 점용도와 점용지수를 정의한다. 개발된 항로설계기법을 울산신항개발계획에 적용하였다. 이 계획에서 항로의 폭은 전장의 1.5배 중심교각 57도인 만곡부의 곡률반경은 전장의 5.0배로 설계하였으며, 항로부근에는 SBM이 위치하고 있다. 모델의 적용결과 항로의 폭과 곡률반경은 적절하지만, 대각도 변침과 항로부근에 위치한 SBM에 의해 선박조선상의 어려움이 야기되는 것으로 분석되었다.

• 한국항해학회지
• /
• 제22권3호
• /
• pp.43-50
• /
• 1998

This study aims at estimating the in-and-out traffic volume and improving the main channel in Kwangyang Harbour, by utilizing measurement of congestion, i.e, the bumper model. In 2011, the traffic volume of the main channel is 11.96 ships per hour and its traffic density is evaluated 9.53% of the basic traffic capacity. Therefore the existing width of the main channel, 850m is safe enough but the channel requires the traffic separation scheme as suggested in order to secure the safe of the transit vessel.

• Composites Research
• /
• 제12권5호
• /
• pp.23-30
• /
• 1999

Fiber reinforced composite materials are widely used in automotive industry to produce parts that are large, thin, lightweight, strong and stiff. It is very important to know a charge shape in order to have good products in the compression molding. In particular, the product such as a bumper beam is composed of the random and unidirectional fiber mats. The characteristics of flow fronts such as a bulging phenomenon for random mat and unidirectional fiber mat and slip parameters are studied numerically. And the effects of viscosity ratio and stack type on mold filling parameters are also discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.115-115
• /
• 2004

최근에는 자동차용 범퍼(Bumper), 인판넬(In-panel), 도어판넬(Door panel), 도어가니쉬(Door Garnish) 등과 같은 대형 사출성형품을 성형하기 위한 금형설계에 핫 러너 시스템(Hot Runner System)에 밸브 게이트(Valve Gate)를 채용한 밸브 게이트 시스템을 많이 사용하고 있다 이 시스템을 사용함으로서 성형 싸이클타임의 단축, 수지 스크랩의 감소 등의 말은 장점이 있으나, 실제 성형작업 적용 시 밸브 게이트의 작동순서 및 개폐시간의 제어 등에 정확한 표준이 없어 시험 사출시 최적 성형조건의 셋팅이 많은 시간을 소모하고 있는 문제점이 있다.(중략)