• 한국육종학회지
• /
• 제43권2호
• /
• pp.126-132
• /
• 2011

The bulb storability of eight red and ten yellow onion (Allium cepa L.) cultivars grown primarily in Korea was evaluated. During storage, sprouting occurred earlier in red cultivars than in yellow cultivars. In addition, the ratio of sprouted to unsprouted bulbs increased more rapidly in red cultivars than in yellow cultivars. However, not all yellow cultivars had strong storabilities. Bulb storability of three yellow cultivars was as poor as that of red cultivars, suggesting only a slight possibility of a pleiotropic effect of color and bulb storability. Meanwhile, $F_3$ lines of a red cultivar selected based on stronger storabilities showed intermediate storabilities between those of the red and yellow cultivars, implying that strong storability could be obtained by successive selection. In contrast, $F_1$ hybrids from crosses between yellow and red breeding lines showed poor storability compared with the yellow cultivars, indicating that poor storability may be dominant over strong storability. The relationships between color and other traits that potentially affect storability, such as fresh and dry weight, water content, and firmness of bulbs, were evaluated. No significant differences in these traits were observed between the two colors, although the water content of yellow cultivars and the dry weight of red cultivars were slightly higher than their counterparts. Correlation analyses between bulb storability and other traits, including weight, water content, and firmness, also showed no significant correlations. In this study, no correlations were identified between bulb color, storability, and other traits. However, based on these results, red cultivars with stronger storabilities could be developed through successive selection of bulbs with stronger storabilities.

• 구강회복응용과학지
• /
• 제35권3호
• /
• pp.191-198
• /
• 2019

본 증례는 상악골 결손이 있는 무치악 환자에서 3D printing을 이용해 closed hollow bulb obturator로 수복한 증례이다. Magic $denture^{TM}$ 시스템(Cozahn, Seoul, Korea)에서 제공하는 트레이와 인상법을 이용하여 구내 인상을 채득하였고, 시적의치상에서 수직고경과 안모, 유지력 등을 확인하였다. 환자가 요구하는 바와 오차를 시적의치에서 수정한 후 이를 반영하였다. 의치의 무게를 줄이고 균일한 두께를 부여하기 위해 상악골 결손부위를 closed hollow bulb로 디자인하여 최종의치상을 프린팅하였다. 치료 후 심미적 및 기능적으로 만족스러운 결과를 얻었기에 이를 보고하는 바이다.

• 한국자원식물학회지
• /
• 제25권5호
• /
• pp.591-595
• /
• 2012

온실을 이용한 상온 저장시설의 실용화 가능성을 예측해보고 '창녕대고'와 '터보' 양파의 저장성을 비교해 보고자 3개월간 저온과 상온조건에서 품질변화를 조사하였다. 중량 감소율은 저장기간 동안 지속적으로 증가하였으며 저온저장시 3개월 후 약 2% 정도 감소하였고 상온저장의 경우 약 4% 감소를 나타내었다. 저장 전후의 경도를 비교한 결과 저장 조건 및 품종 간에 따른 유의한 차이는 인정되지 않았으나 수확직후의 경도에 비해 3개월 저장 후 경도가 두 품종 모두 감소하는 경향을 나타내었다. 양파 외피의 착색정도를 나타내는 Hunter a 값은 두 품종 모두 상온저장한 양파가 저온저장 처리에 비해 높은 값을 나타내었으며 이는 상온저장한 양파의 외피가 건조되면서 착색된 것으로 사료된다. Hunter L 값은 저장조건에 관계없이 저장일수에 따라 감소하는 경향을 나타내었다. 부패율은 상온저장시 창녕대고에 비해 터보 품종이 7.8%로 현저히 낮았으며, 저온 저장시 두 품종 모두 2% 미만의 부패율을 나타났다. 따라서 온실을 이용하여 상온저장 할 경우 저장 가능기간으로는 3개월 이내가 적당할 것으로 예측되며 저장성이 강한 품종을 이용할 경우 저장기간을 더 연장할 수 있을 것으로 판단된다.

• 원예과학기술지
• /
• 제29권4호
• /
• pp.293-297
• /
• 2011

This experiment was conducted to elucidate the effects of mulching materials and removing time of the transparent polyethylene (PE) film on the growth of garlic at Uiseong experimental field, Korea. The experimental mulching materials comprised of transparent polyethylene film (0.025 mm) and net polyethylene (NPE). Plant height and leaf number of garlic were highest at PE treatment when the PE removing date was March 18 and this treatment also promoted the no. of cloves. Length of leaf sheath and bolting rate were highest and bulb weight loss rate was lowest at PE + NPE treatment when the PE removing date was March 18. But clove number was the lowest in this treatment compared to conventional PE film treatment. Conventional mulching method accelerated secondary growth rate but bulb weight loss was vice versa. There were statistically no differences in bulb diameter among treatments but conventional treatment positively focused on bulb diameter. Whenever PE film remove can suppress weeds compared to no mulching treatment but the dry weight of weeds were increasing trends as the removal dates of PE film were delayed. Transparent PE or PE + NPE treatments can be recommended to grow best quality garlic when PE film removing date is March 18.

• 한국연초학회지
• /
• 제20권1호
• /
• pp.13-18
• /
• 1998

In the flue curing process, the wet bulb temperature is usually controlled at a constant level. To improve the quality of flue cured leaves, we studied the effect of the cyclic change of wet bulb temperature at the yellowing stage of flue curing on physical properties of cured leaves. The wet bulb temperature was automatically controlled between preset high (38℃) and low point (35℃) every one hour cyclically. As a result, the acceleration of the increase in the physical properties of cured leaves were observed. The leaves cured by this method were more or less orange in color, better bodied, and less brittle compared with the leaves produced by conventional curing. However, the leaves cured by this method had a little sharpness and harshness. As to the physical properties, there was decreased in occurrence of flat leaves than that of conventional ones. On the other hand, in case of cyclic curing method, increase of price per kg reached to 2-3% compared with those of conventional ones.

• 대한수의학회지
• /
• 제37권3호
• /
• pp.499-508
• /
• 1997

The distributions and morphological characteristics of neurons displaying immunoreactivity to the catecholamine synthetic enzymes, tyrosine hydroxylase(TH), dopamine-${\beta}$-hydroxylase(DBH), and phenylethanolamine-N-methyltransferase (PNMT) were examined in the adjacent sections of the olfactory bulb of the Striped Field Mouse(Apodemus agrarius coreae). None of these cell groups displayed either DBH or PNMT immunoreactivity. Many TH-immunoreactive neurons were present in the olfactory bulb. The vast majority of such cells occurred in the glomerular layer as periglomerular cells surrounding the glomeruli. Numerous addtional cells were present in the external plexiform layer, and scattered in the mitral cell layer and internal plexiform layer. Also TH-immunoreactive neurons were found in the glomerular layer and granular layer of the accessory olfactory bulb.

• 한국표면공학회지
• /
• 제46권5호
• /
• pp.229-233
• /
• 2013

The small punch(SP) tests that can be applied to high strength sheet steel in automobile were carried out to evaluate the behavior of hydrogen embrittlement of DP sheet steels. In order to charge hydrogen at DP sheet steels, DP sheet steels were treated by the electrochemical hydrogen charging method under the charging conditions of current densities of 100, 150 and 200 $mA/cm^2$ for charging times of 5, 10, 25 and 50 hrs. Respectively, After hydrogen charging with experimental conditions, SP tests were performed. From the SP results, the correlations between the variation of bulb diameters and bulb heights with the hydrogen charging conditions were analysed. It was shown that the variation of bulb diameters were not significant with the hydrogen embrittlement due to the amounts of hydrogen charging. On the other hand, the bulb heights were observed to decrease with increasing hydrogen contents. It was thought that these results of the variation of bulb shapes after SP tests would be estimated as the index of evaluation of hydrogen embrittlement.

• 한국자원식물학회지
• /
• 제11권3호
• /
• pp.264-271
• /
• 1998

This study was conducted to investigate morphological characteristics of Korean local garlic varieties and to define the genetic variability and the correlations amongthe characters associated with yield. The plant height, the leaf sheath diameter, the nubmer of leaves, and bulb weight were significantly increased in the garlic plants from heavier seed bulbs. The proportation of six clove bulbs was more than 60% in Seosan variety and this was not realted with the number of cloves in seed bulb. While more than 70% bulbs in Jeoksung and Danyang varieties cultivated in paddy field were composed of 6 or 7 cloves, majority of the bulbs of Euisung and Danyang varieties cultivated in upland were composed of bulbs with 7 cloves or more. The highest genotypic coefficient of variation (GCV) and phenotypic coefficient of variation (PCV) were observed in bulb weight. GCV and PCV also showed high value in leaf sheath diameter. Thus, there is a greater scope for selection of these characters. The small difference between PCV and GCV values in plant height indicates that the environmental influence would be limited in this character. High heritability was observed of plant height (56.76%) and bulb weight (45.95%). And the weight per bulb (34.24%) exhibited highest genitic advance followed by leaf sheath diameter (18.8%) and plant height (9.61%), and those would be the ideal characters for selelction.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.858-876
• /
• 2021

Although widely used, the design of the bulbous bow for ships has been difficult due to the complex interference between the wave system generated by the bulb and the wave system of the ship hull. Until now, a bulbous bow has been often designed using Kracht charts, which were established based on model test data, but these charts apply only to ships with a block coefficient C_B = 0.56-0.82, Froude number Fn = 0.20-0.40, and the obtained bulb sizes are only close to optimal. This paper presents a new method for the optimal design of bulbous bow, starting from the design of an initial bulb using Kracht charts for ships with any block coefficient or Froude number, then resizing this initial bulb to define the optimal bulb sizes based on a multi-objective function of the required power reduction, and a combined solution of Computation Fluid Dynamics (CFD) analysis and surrogate models. This study was applied to a fishing vessel FAO 75, which has been model tested and used to design steel fishing vessels in Vietnam recently. The obtained quantitative results showed the same trend as the theory and practice, with a reduction of the ship's required power by about 14%.

• 생물환경조절학회지
• /
• 제20권1호
• /
• pp.27-32
• /
• 2011

마늘 신품종 '올캐'의 특성을 구명하고, 화경제거 유무 및 제거방법이 '올캐'마늘과 '남도'마늘의 생육 및 수량에 미치는 영향을 검토하였다. '올캐'마늘은 추대기 및 수확기가 '남도'마늘보다 20일 정도 빨랐다. 지상부 생장은 '남도'마늘보다 떨어졌으나 뿌리 발달은 좋았다. 각 품종의 수확적기에 수확할 경우 구 중량은 '남도'마늘이 '올캐'마늘 보다 20% 정도 많았다. 40g 이상의 대구 비율도 '남도'마늘이 48%로 '올캐'마늘 25%에 비해 두배 정도 많았다. 인편수는 '올캐'마늘이 '남도'마늘 보다 1.9개 정도 많았다. 열구 발생률은 '올캐'마늘이, 저장중 부패율은 '남도'마늘이 높았다. 화경을 제거할 경우 무처리에 비해 잎마름 속도가 빠르고 그 정도도 심했으나 화경제거 방법간에는 차이가 없었다. 엽면적은 잎마름률과 같은 경향이었다. 수확 50일 후의 구중은 화경 제거구가 무제거구에 비해 '올캐'마늘은 11%, '남도'마늘은 13%정도 많았다. 40g 이상의 대구 분포비율은 화경제거구가 무처리구에 비해 '올캐'마늘은 약 27%, '남도'마늘은 약 44% 정도 많았다. 따라서 두 품종 모두 화경을 제거해 주는 것이 대구 생산에 유리하며 특히 '남도'마늘은 화경제거 효과가 컷다. 화경제거 방법간에는 통계적인 유의차가 없었다. 열구 발생률과 저장중 부패율은 화경제거 유무 및 제거방법에 따른 차이가 없었다.