• 전자공학회논문지
• /
• 제50권6호
• /
• pp.122-130
• /
• 2013

메모리반도체산업이 성장함에 따라 수요와 공급이 큰 폭으로 증가하고 있다. 그 중 플래시 메모리가 스마트폰, 테블릿PC, SoC(System on Chip)산업에 많이 사용되고 있다. 플래시 메모리는 NOR-형 플래시 메모리와 NAND-형 플래시 메모리로 나뉜다. NOR-형 플래시 메모리는 BIST(Built-In Self Test), BISR(Built-In Self Repair), BIRA(Built-In Redundancy Analysis) 등 많은 연구가 진행되었지만 NAND-형 플래시 메모리 BIST는 연구가 진행되지 않았다. 현재 NAND-형 플래시 메모리 패턴 테스트는 고가의 외부 테스트 장비를 사용하여 테스트를 수행하고 있다. NAND-형 플래시 메모리에서는 블록단위로 소거, 페이지 단위로 읽기, 쓰기 동작이 가능하기 때문에 자체 내장 테스트가 존재하지 않고 외부장비에 의존하고 있다. 고가의 외부 패턴 테스트 장비에 의존해서 테스트를 수행하던 NAND-형 플래시 메모리를 외부 패턴 테스트 장비 없이 패턴 테스트를 수행할 수 있도록 두 가지의 유한 상태 머신 기반 구조를 갖고 있는 BIST를 제안한다.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.146-151
• /
• 2021

We introduce an arbitrary waveform generation method and its H/W implementation case based on Rademacher and Walsh function. According to the orthogonal and periodic features of Rademacher and Walsh function, simple calculations can generate arbitrary waves with affordable logics. We implemented an FPGA-based AWS using above two functions, and verified. HDL simulation shows the proposed idea can draw desired analog test waveforms very fast, and its H/W size is promising to Built-Out Self-Test(BOST) logics for AI ICs.

• 한국정보처리학회논문지
• /
• 제1권2호
• /
• pp.272-278
• /
• 1994

본 논문에서는 BIST(Built-In Self Test)시 순서회로내의 조합회로를 pseudoexhaustive 시험하는데 필요한 테스트 패턴 생성기와 응답 분석기를 제안한다. 제안하는 테스트 패턴 생성기는 테스트 패턴의 초기값을 스캔 인 할 수 있고, exhaustive test pattern 을 생성할 수 있다. 또한, 응답 분석기는 회로의 응답을 분 석할 수 있을 뿐만 아니라 응답 결과를 스캔 아웃할 수 있다. 이러한 테스트 패턴 생 성기와 응답분석기는 SRL과 LFSR을 결합하여 설계하였다.

• 소성∙가공
• /
• 제15권6호
• /
• pp.467-472
• /
• 2006

The forming limit diagram of tube is required for the part design and the formability analysis of tube hydroforming. The finite element analyses of simple bulge test were done to obtain the various strain combinations on FLC. The finite element analysis results were shown that the bursting at various strain combinations could be induced by simple bulge test. The experiment oi tube bulge test was carried out according to the test condition that obtained from finite element analysis and the left hand side of forming limit diagram was built.

• Steel and Composite Structures
• /
• 제9권3호
• /
• pp.255-274
• /
• 2009

This paper presents an experimental study of a newly developed composite floor system, built up from thin-walled C-profiles and upper concrete deck. Trapezoidal sheeting provides the formwork and the fastening of the sheet transmits the shear forces between the C-profiles and the deck. The modified formation of the standard self-drilling screw in the beam-to-sheet connection is applied as shear connector. Push-out tests are completed to study the composite behaviour of the different connection arrangements. On the basis of the test results the behaviour is characterized by the observed failure modes. The design values of the connection stiffness and strength are calculated by the recommendation of Eurocode 4. In the next phase of the experimental study six full-scale composite beams are tested. The global geometry is based on the proposed geometry of the developed floor system. The applied shear connections are selected as the most efficient arrangements obtained from the push-out tests. The experimental behaviour of the composite beams are discussed and evaluated. As a conclusion of the experimental study the Eurocode 4 plastic design method is validated for the developed composite floor.

• 품질경영학회지
• /
• 제21권2호
• /
• pp.1-16
• /
• 1993

Early generations of products had little to no inherent capability to test themselves. The technologies involved often required only visual inspection and limited probing to troubleshoot the system once it was turned over to maintenance personnel. However, as the complexity of military and commercial systems grew, symptoms of failure became less noticeable to the operator. Therefore, the procedure to access, inspect, repair and replace a component became complicated, the requirements for personnel skill and testing equipment increased. and it took too long of a time to maintain a system. Meanwhile, the need for availability became more mission-critical and maintenance become very expensive. The obvious solution was to design in-system circuits or devices to self-test the primary system, the Built-In-Test(BIT) was born. This approach has continued right on up through present systems and is an integral part of systems now being designed. The object of this paper is to present a state-of-the-art research for filtering out the BIT diagnosis mistakes using Bayesian analysis and develop the algorithm for Redundant systems with BIT to improve BIT diagnosis.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.995-998
• /
• 2005

본 논문에서는 시스템 온 칩 (SoC, System-on-Chip) 트랜시버에 적용이 가능하며. 저잡음 증폭기(LNA, Low Noise Amplifier)를 위한 자동 보상 회로 (ACC, automatic compensation circuit)를 제안한다. 개발된 회로는 고주파 내부 자체 검사 (BIST, Built-In Self-Test) 회로, 커패시터 미러 뱅크 (CMB, Capacitor Mirror Banks)와 디지털 처리장치로 구성되어 있다. 자동 보상 회로는 LNA가 정상 동작을 하지 않을 때 SoC 트랜시버의 구성요소인 디지털 프로세서를 이용하여 LNA가 정상 동작을 하도록 자동적으로 조정하는 역할을 한다.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2251-2260
• /
• 2021

The motion control of the divertor maintenance system of the China Fusion Engineering Test Reactor (CFETR) was studied in this paper, in which CFETR Multi-Functional Maintenance Platform (MFMP) was simplified as a parallel robot for the convenience of theoretical analysis. In order to design the motion controller of parallel robot, the kinematics analysis of parallel robot was carried out. After that, the dynamic modeling of the hydraulic system was built. As the large variation of heavy payload on MFMP and highly nonlinearity of the system, A Fuzzy-PID controller was built for self-tuning PID controller parameters by using Fuzzy system to achieve better performance. In order to test the feasibility of the Fuzzy-PID controller, the simulation model of the system was built in Simulink. The results have showed that Fuzzy-PID controller can significantly reduce the angular error of the moving platform and provide the stable motion for transferring the divertor.

• 대한치과기공학회지
• /
• 제16권1호
• /
• pp.105-113
• /
• 1994

This study attempted to find out how much stress Dental Technicians of working in Dental Laboratory have built up in the midst of their daily lives are according to their sex, age, duration of work and their kinds of positions. After self-administered questionnaire were distributed by direct to 230 technicians samplely selected from dental laboratories in Seoul and Pusan of whom 163 technicians responded from october 1 through october 13, 1994. Analysis of the data was processed by t-test, $X^2$-test, ANOVA. This results are as follows. 1. Levels of Stress of the total 163 respondents by sex is not higher among male than female(p>.05). 2. Levels of stress - 36.2%(74 Dental technicians) of all Dental technicians were in stress on the whole and 9.2%(15 Dental technicians) of them were in a serious situation by accumulated stress. 3. Realization of stress - 10.1%(16 Dental technicians) of the dental technicians and 89.9%(143 Dental technicians) were found out to be in a dangerous sign or in a situation by accumulated stress. Further studies which a big size and a delicate method of measuring their general characteristics are needed.

• 제어로봇시스템학회논문지
• /
• 제11권2호
• /
• pp.160-166
• /
• 2005

In this paper, to overcome drawbacks of FLC a self tuning fuzzy sliding mode controller is proposed, which controls the position of excavator's attachment, which can be regarded as an ill-defined system. It is reported that fuzzy logic theory is especially useful in the control of ill-defined system. It is important in the design of a FLC to derive control rules in which the system's dynamic characteristics are taken into account. Control rules are usually established using trial and error methods. However, in the case where the dynamic characteristics vary with operating conditions, as in the operation of excavator attachment, it is difficult to find out control rules in which all the working condition parameters are considered. Experiments are carried out on a test bed which is built around a commercial Hyundai HX-60W hydraulic excavator. The experimental results show that both alleviation of chattering and performance are achieved. Fuzzy rules are easily obtained by using the proposed method and good performance in the following the desired trajectory is achieved. In summary, the proposed controller is very effective control method for the position control of the excavator's attachment.