• Architectural research
• /
• v.15 no.3
• /
• pp.143-150
• /
• 2013

The Korean government recently has rediscovered the potential value of Han-Ok, the Korean traditional house, as an eco-friendly building. In order to objectively verify the environmental performance of Han-Ok as a low carbon green building, this paper suggests the analysis method of GHG emission load of Korean traditional house, based on Life Cycle Assessment, which is commonly abbreviated to "LCA". The environmental impacts caused by building construction and operation can be analyzed through the sum of input and output data from every phase. The study particularly describes the GHG reduction effect by using traditional building materials such as wood products, traditional clay roof tiles, and mud, which are mainly used to construct Han-Ok. Also the study proposes the method for comparative analysis of quantity of GHG emissions in building's entire life cycle so that the data can be used as a reliable basis to optimize the environmental performance of building.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.127-128
• /
• 2012

Exhaustion of fossil fuels and continued high oil prices, global warming, climate change and to respond to the development and use of alternative energy technologies is expanding rapidly throughout the world. Recently, character of domestic building is appearing by along with economic growth, high-rise, large size, congestion. For this reason, the amount of electrical energy used in a building is increasing. In this study, the applicability of PV modules that are used as roofing and efficiency analysis, and more from the building of BIPV modules built using the activation of alternative energy sources in Korea are aimed want done.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.4
• /
• pp.71-80
• /
• 2003

The purpose of this study is to analyze the window area ratio distribution of building facade in Tokyo metropolitan area. The survey was carried out in Marunouchi, Kanda, Kasai and Todoriki district. The results of this study were as follows; to propose of window area ratio production method, analyzed and surveyed window area ratio of each district building-used and to compared every wall window area ratio of building. Every wall window area ratio of office district is $20\sim40%$, ones of non-office district is 15% or 35%. Residential area results are every wall window area ratio of apartment is 35%, ones of a house is 15%. To increase of office building to appear that Kanda, Kasai added window area ratio. But, Marunouchi, Todoriki wad not this tendency. Above mentioned results are made out database.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.496-499
• /
• 2003

System Integration is significant role in building, because it is that the more building system is integrated, the more they can save management costs and energy costs. Nowadays system protocols in building use BACnet, LonWorks, etc. to integrate effectively, but their interoperability is not perfect. Therefore, we propose system integration using Ethernet and TCP/IP for perfect harmony. When data network protocol, Ethernet and TCP/IP is used for control network, there are several problems. But there have been solved by many researches. therefore it is possible that building system integrate to use Ethernet and TCP/IP. Finally, we show that Ethernet and TCP/IP can be used for building automation system integration.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.274-278
• /
• 2013

Over the past several years, the building codes that govern commercial building construction have become increasingly prescriptive in nature, specifying detailed information related to the design and installation of the systems, while offering no reasoning behind their prescriptive measures. For example, metal stud framing is commonly used in commercial building construction to create bearing walls and non-bearing partition walls. BIM provides a powerful platform for developing and implementing "pre-planning" tools and methods to facilitate both engineering and administrative controls during construction. This paper discusses the use of BIM to enhance constructability for commercial building construction activities, specifically metal stud framing. Using specific real-world examples this paper demonstrates ways that BIM can be used to foresee potential construction issues and motivates and informs future uses of BIM technologies

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.10a
• /
• pp.157-161
• /
• 1993

Optical devices and electronic equipments used in the laboratory of the synchrotron light source building of the accelerator have stringent vibration limits. In order to control the vibration of the building structure and HVAC systems which are main vibration sources are evaluated using experimental modal analysis. Double anti-vibration system is used for the HVAC system and results show that the double anti-vibration system reduces the vibrations of the building to acceptable levels.

• International Journal of High-Rise Buildings
• /
• v.3 no.3
• /
• pp.167-171
• /
• 2014

TORANOMON HILLS is the main building of a large-scale re-development project located in the center of Tokyo. This high-rise building has a height of 247 m and 52 floors above ground, 5 floors below ground, and $62m{\times}80m$ in plan. It is used as hotel, residential facilities, offices, shops and conference facilities. The super structure is mainly a rigid steel frame with response-control devices, using concrete-filled steel tube columns. The underground section is a mixed structure composed of steel, steel-reinforced concrete and reinforced concrete framings. The piled-raft foundation type is used. The remarkable feature of this high-rise building is that the motorway runs through the basements of the building, which makes it stand just above the motorway. This condition is an important factor of the building design. The plan shape is designed to fit along the curve of the motorway. Special columns at the corners are required to avoid placing columns in the motorway. This special column is a single inclined column in the lower floors that branches into two columns in the mid-floors to suit the column location in the upper floors. The cast steel joint is used for the branching point of each special column to securely transfer the stress.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.837-847
• /
• 2007

The study focused on the evaluation of maintenance management strategies used in public hospital buildings in Lagos state. It also assessed the labour composition for maintenance operations. In achieving these objectives, opinions of maintenance officers of ten (10) different hospitals in different local government areas of the state were sampled through well structured questionnaires. The data collected were analyzed using descriptive and inferential statistics. From the analysis, the study revealed that majority of those public hospitals do not have specific budget for maintenance programmes, maintenance policies, maintenance log book and maintenance manual to guide the operatives. About 98% of them do not understand the type of maintenance strategy being used for their maintenance operations. 78% of the maintenance work are only executed when there is a breakdown or in response to user's request. For labour composition, the cleaning of interior and exterior of the building, inspection of building elements, repairs and replacements of building elements are mainly carried out by in-house staff, while the repair and replacement of equipment is by outsourcing. The study also revealed that using in- house staff, reduces costs and provides a higher security while outsourcing provides more flexibility in staffing reduces equipment expenditures and provide better access to special skills. The study recommended proactive measures to provide necessary training and support for maintenance staff and users of these facilities and a means of securing sufficient funds for maintenance programmes.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.587-592
• /
• 2009

Construction companies in Korea have shown interest in BIM (Building Information Modeling) even if late, adopted it, and applied it to several projects. But, it is hard to figure out the status of BIM implementation. Thus, this study is to figure out the status of BIM implementation in Korea by surveying major construction companies in Korea and comparing with similar surveys abroad. The survey result shows that only 11 companies in Korean construction industry adopted BIM. The clash check (73%) was mostly used among various BIM functions and other functions were used less than 30%. As of 2008, only 8 construction companies have used BIM in 27 projects and thus, Korean companies are in the BIM introduction period. Therefore, successful introduction of BIM is required by benchmarking the BIM introduction process of overseas construction industries

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.331-332
• /
• 2023

With the aging of buildings, the number and importance of regular inspections of buildings are increasing. The current safety inspection goes through a procedure in which a skilled technician visits an old building, visually checks it, takes a photo, and finally organizes and judges it at the office. For this, field personnel and analysis and review personnel are required. Since the inspection procedure includes taking pictures, a huge amount of data has been accumulated from the time digital photos were used to the present. When a model that can check cracks outside a building is developed using these data, manpower and time required can be greatly reduced. Therefore, this study aims to create a model for classifying cracks that occur outside the building through the artificial intelligence method. The created model can be used as a basic model for determining cracks only by external photography in the future, and furthermore, it can be used as basic data for calculating the size and width of cracks.