• Korean Journal of Heritage: History & Science
• /
• v.56 no.3
• /
• pp.46-59
• /
• 2023

Various Baekje ground-level building sites have been identified, in Pungnaptoseong Fortress, including Mirae Village's site E-1. However, building site E-1 is the only one with excavated roof tiles that are directly connected to the building site. As for building sites E-2, D-1, and D-2, which are comparable to site E-1, it is very possible that they had tiles on the roof based on their jeoksim (blocking facilities for roof slopes) and building structures. Also, although they are semi-underground pit structures, pit building sites A-30 and modern apartment site A-5, as well as the No.44 remains of Gyeongdang District, which is closer to a ground-level type, the buildings with tiles may have been constructed in the form of partial tile roofs rather than full-face tile roofs. Therefore, there may be several reasons behind the use of tiles on roofs in the early days, but the primary background of the building's authoritative function would have been considered first. Considering that China and Japan started using tiles on nationally important buildings such as palaces, temples, and ritual buildings, it may be presumed that Baekje began using tiles from the time it centralized power. It is believed that Baekje's early roof tile buildings evolved from rudimentary residential architecture to advanced public architecture, taking into consideration fire prevention and structural stability in large buildings. It is difficult to find similar cases in Korea with structural features such as the elevated foundations or underground stone foundations that can be found in Mirae Village building site E-1. Rather, similar architectural techniques can be found in China and Japan. In China, similar construction techniques were discovered in buildings of worship that were primarily built in the palace surroundings, such as Jangan Castle. Based on this, it appears that roof tile building sites, such as site E-1, that have been discovered have a strong correlation with the characteristics of buildings of worship, and ground type buildings, such as sites D-1 and D-2, are important facilities that are related to important public facilities such as state-run warehouses. This provides many implications regarding the early Baekje city structure.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.6
• /
• pp.75-82
• /
• 2008

The purpose of this study is to present the rational decision process for new ward office building site. AHP Technique used in this study considers both quantitative and qualitative factors on the basis of decision maker's intuitive, reasonable or unreasonable judgement by giving weight through mutual comparision of publicity factors. The evaluaion factors were refer to another five ward office there were executed these kinds of new site selection before. These standards are composed of 6 middle groups and classified into 9 detailed standards. Alternative building sites are five places in this district. The final evauation standards are Accessibility, Urban Expansion Possibility. Distrct balance, Environment, Financing. Development easiness. And It became clear that the priority of evaluation is Financing > Urban expansion > Accessibility > Development easiness > District balance > Environment. In conclusion, it was determined that alternative " E " is the most adequate place for new ward office building.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.27-28
• /
• 2022

There is a limit to preventing various types of safety accidents in advance at construction sites. Even for buildings of the same total floor area, it is expected that the more complex the building shape or the higher the number of floors, the higher the probability of a safety accident. Therefore, it is necessary to analyze the effect of the shape of a building on safety accidents using safety accident data generated during actual construction. The purpose of this study is to analyze the impact of building shape on safety accidents. As a result, the R2 value of shape factor and safety accident was 0.901, and the R2 value of construction difficulty and safety accident was 0.944. In the future, the results of this study will be used as basic data for improving safety management related systems.

• Journal of the Korean housing association
• /
• v.12 no.2
• /
• pp.181-190
• /
• 2001

The purpose of this study is to analysis web sites which relate to housing environment on Internet and to suggest guidelines which are needed in digital life. Data are in 53 web sites searched by housing environmental word such as people, living, town and so on. The web sites are analyzed by key words. The results of this study were as follow: The web sites are divided into e-housing community, e-housing management, e-housing workplace and e-housing design. These are the digital life of new type. E-housing community sitess key words are 3D virtual world, chatting, information, service, community etc. E-housing community is related to making new wired community cross time and space. E-housing management sitess key words are guard management, apartment management, building management etc. E-housing management sites provide the useful information of housing management. E-housing workplace sitess key words are virtual office. conference etc. E-housing workplace sites enable us to work in cyberspace. E-housing design sitess key words are design, interior, furniture etc. E-housing design sites provide marketing, consulting and designing in relation to the house. The web life style on cyberspace is common and makes many changes happen in house life and environment.

• Journal of Fashion Business
• /
• v.17 no.6
• /
• pp.125-140
• /
• 2013

The aim of this study was to analyze e-commerce sites of luxury fashion brands in order to provide insights on how to enhance online site quality. For the research, forty-eight components of thirty-one luxury fashion brands' e-commerce sites were investigated during October 2013. For the analysis of clustering e-commerce site components and segmenting e-commerce sites of luxury brands, a hierarchical cluster analysis was applied through using the Ward's method and squared Euclidian distance for binary data. Further, Fisher's exact test was applied in order to distinguish three groups of characteristics in the luxury e-commerce sites. These analyses were carried out by SPSS 21. The result indicated that the components of e-commerce sites were grouped into three categories: basic elements, additional elements and elements of building brand identity. These components were categorized by whether their functions were basic and essential or additional and advanced. The other norm of categorization was related to brand identity. Furthermore, the luxury brands' e-commerce sites were segmented into three groups: a group of endeavoring to promote goods, a group of undistinguished performance, and a group of endeavoring to intensify brand identity. In this segmentation, brand identity or promotional aspects were decisive. Overall, luxury brands were trying to convey their traditional strength through their e-commerce sites. In order to achieve this purpose, brand identity or promotional aspects played an important role.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.556-563
• /
• 2020

Most of a BIPVS (Building Integrated Photovoltaic System) is installed on the rooftop or wall of a building. Therefore, the main factor to consider for selecting the installation site is the shadow effects produced by the surrounding buildings. On the other hand, when the photovoltaic was installed on soundproof walls, shadow effects were produced by not only surrounding buildings but also the surrounding trees. Therefore, a different data model and algorithm with the BIPVS case are essential for proper installation sites selection of a SIPVS (Soundproof wall Integrated Photovoltaic System). This paper deals with the DSM (Digital Surface Model)-based proper installation site analysis for SIPVS. First, the solar incident and altitude angles of the installation candidate sites (solar panel) during the year were calculated. Second, the shadow effects (shadowed or unshadowed) were determined for the candidate sites at each time with the DSM. Third, the amount of solar radiation was calculated with the incident angle for the candidate sites at an unshadowed period. The proper installation site of the SIPVS could then be selected by comparing the accumulated annual solar radiation for each candidate. The proposed algorithm was implemented as a prototype (Java program). From the experiment, the order of the installation suitability was determined among the nine candidates. The proposed algorithm could be used for proper BIPVS installation site analysis aimed at the lower part of a building and calculation of the expected power production.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.168-175
• /
• 2011

Construction accidents are major problem in Turkish Construction industry and especially fatally rates are very high. Current legislative system on occupational safety in Turkey enforces employers to implement safety measures as well as safety management systems. However level of consciousness in the industry is unsatisfactory and safety are perceived as extra cost and unnecessary expenditure. Moreover, especially in small residential building constructions which have a big share in the industry and unfortunately safety measures to mitigate or abate construction risks do not exist. The study focuses on small residential building construction sites and in the scope of this study, thirty building projects are examined. For each building project, project cost including labour and material costs, service and consultancy costs for mechanical, electrical systems as well as architectural and structural services, costs for supervision and finally general expenditures for construction site facilities were calculated. On the other hand, occupational safety costs for personal protective equipment, collective protective measures, consultancy and training were determined. Work breakdown structures were established and for each work item firstly occupational risks were evaluated and furthermore according to risk scores safety measures to be implemented were defined and related costs were calculated. The study gave results for total safety cost on average, in terms of percentage of total project cost (3.73% of total project cost), safety cost per man-hour (0.40 USD) and safety cost in terms of unit construction area (11.60 USD per square meter). Since safety management is a part of whole project management process, study gives suggestions and techniques to calculate safety costs and implement safety measures as a part of project management service for professionals. Authors believe that suggested approach may easily developed by the usage of more data to establish a model for estimation not only for building construction sites but also for all construction projects.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.397-408
• /
• 2021

The construction industry has the highest occupational accidents/injuries and has experienced the most fatalities among entire industries. Korean government installed surveillance camera systems at construction sites to reduce occupational accident rates. Construction safety managers are monitoring potential hazards at the sites through surveillance system; however, the human capability of monitoring surveillance system with their own eyes has critical issues. A long-time monitoring surveillance system causes high physical fatigue and has limitations in grasping all accidents in real-time. Therefore, this study aims to build a deep learning-based safety monitoring system that can obtain information on the recognition, location, identification of workers and heavy equipment in the construction sites by applying multiple object tracking with instance segmentation. To evaluate the system's performance, we utilized the Microsoft common objects in context and the multiple object tracking challenge metrics. These results prove that it is optimal for efficiently automating monitoring surveillance system task at construction sites.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.3
• /
• pp.273-279
• /
• 2019

Safety sign panel has been used in construction sites to assure the safety of the workers. Such safety panel can be categorized as 4 different signals, such as prohibition, warning, indication, and information. Each of the categorized item must follow lawful which is specifically designated for its own purposes, on its color and the shape. However, the color and shape of the safety sign panels that have been used in construction sites are not found to follow the suggested lawful requirement, and such differences are originated from safety merchandise production company or vendor, and construction company. In this study, samples of safety sign panels were obtained from various construction sites in Republic of Korea then the colors of such samples were measured, analyzed, and compared. According to the results, colors of the safety sign panels were out of the lawful requirement due to the aging and surface contamination of the safety sign panel. Frequent maintenance on the safety sign panel is therefore necessary. In addition, steel panels that were used in the construction sites were found to be unsuitable to meet the lawful requirements. In order to the color requirements on safety sign panel, it is recommended for Korea Occupational Safety and Health Agency to provide standard reference sample for each material used to produce safety sign panel, to distribute them to the producer and construction sites, and to supervise overall system.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.821-830
• /
• 2023

This research aims to identify risk factors for fall accidents at small and medium-sized construction sites through a comprehensive regression analysis. Initially, the study involved collecting a decade's worth of fall accident data from these sites. A t-test confirmed a significant variation in the treatment duration following fall accidents between two distinct groups: small and medium-sized versus large construction sites. Subsequently, a regression analysis was conducted to establish a model highlighting the risk factors associated with safety accidents. The factors influencing fall accidents were determined to be, in descending order of impact, the time of the accident, the day of the accident, and the occupational classification. The findings from this study are expected to serve as foundational data for enhancing policies and conducting statistical analyses tailored to construction site sizes. They also provide crucial information for future research on risk quantification at small and medium-sized construction sites.