• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.61-70
• /
• 2011

Based on the trend of architectural lighting of residential building, this study is to examine architectural lighting for residential buildings, and deduce the value and significance of architectural lighting by analyzing architectural lighting and characteristics of residential building through the analysis of works according to the types of works and by analyzing discourse relating to works of architectural lighting of residential building. First, architectural lighting for residential buildings can be categorized according to continuity and extensibility, lighting method and lighting factor. Second, architectural lighting of residential building has come into play since 2000 due to diversified activities at home. Third, architectural lighting had been introduced for living room and used in the form of structure or foundation up until early 2000s, but since mid 2000s, it has been used in intellectual and abstract form using various shapes, finishing material or objects. Fourth characteristic is a space of changing functions overcoming limited space, suggesting an alternative space, and using finishing material and object.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.2
• /
• pp.18-25
• /
• 2000

Since more than Building Exterior lighting is used for improving image at city, the importance of an efficient Building Exterior lighting can't be overemphasized. The purpose of this study was to develop a Building Exterior lighting design process model, through analyzing, measuring brightness, researching application, interview with an architecture for real Building Exterior lighting in night of Seoul. The results of the study can be summarized as: lighting prccess model for Building Extenior consists of four major process which are Building Audit Building Analysis Selection Opportunities Follow throug

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.1
• /
• pp.9-15
• /
• 2014

This paper focuses on the heat gain of a lighting system, one of the most-used appliances in buildings, and its thermal effect within a low energy building. In this study, a dynamic thermal model of a lighting system is first established based on the first principle of thermodynamics. Then, thermal parameters of this model are estimated by experiments and an optimization process. Afterward, the obtained model of the system is validated by comparing simulation results to experimental one. Finally it is integrated into a low energy building model in order to quantify its thermal influence within a low energy building. As a result, heat flux of the lighting system, indoor temperature and heating energy demands of the building are obtained and compared with the results obtained by the conventional model of a lighting system. This paper helps to understand thermal dynamics of a lighting system and to further apply lighting systems for energy management of low energy buildings.

• Korean Institute of Interior Design Journal
• /
• no.40
• /
• pp.139-148
• /
• 2003

For lighting design in such diverse structures, we need lots of considerations, such as use and characteristics of the structure, harmony with its surroundings, and the function and type of lighting to be installed. The structural characteristics is determined by its shape and several vertical and horizontal factors based on the shape, which can be focused on at day time by shading, the surface structure, the quality of the surface and the color. On the other hand, they can be at night hidden in the darkness or enforced strongly by the effect of the lighting. In this paper, correlation between the ways of lighting and building facade types according to vocabularies for sensitivity is explored based upon an analysis of building facades for small-scale commerce which plays an important role in cityscape lighting design. It is considered that categorization of types of building facades, presented in this article, and the classification system of exterior lighting methods can be useful in planning lighting. And the process of the study is thought to be able to present a method about the exterior lighting planning. Furthermore, computer simulation on the bases of the correlation model of the lighting methods related to vocabularies for sensitivity about the building facade types is expected to be data and means which can be a great help for designers to predict various results quickly.

• KIEAE Journal
• /
• v.7 no.6
• /
• pp.29-36
• /
• 2007

Recently, rapid development of technique and change of lifestyle during nighttime has activated the urban outdoor lighting and renovated consideration of nightscape. As the interest of nightscape increases more widely, outdoor lighting has been installed more and more in the cities. Nightscape comes in diverse forms. So, there is no absolute standard for outdoor lighting. But only bright outdoor lighting is not necessarily a good nightscape. Installation lighting without master plan or excessive outdoor lighting may cause a inharmony. This study aims to analyze the luminous characteristics of facade in shopping complexes. For the purpose, four large-scale shopping complexes located in Dongdaemun area were selected. Building facade composition, outdoor lighting composition, and lighting equipment of each shopping complexes are surveyed, and luminance of building facade were measured with Prometric 1400. The result of the study are as follows; (1) Horizontally large-scale shopping complexes emphasize the building entrance and shape of the building at night by outdoor lighting. (2) Non cut-off luminaries installed in building entrance and shop front caused the potential of light pollution.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.2
• /
• pp.8-17
• /
• 2012

The objective of this study is to perform an analysis of the heat(heating and cooling) and lighting energy consumption according to the window area ratio and the application of horizontal louver, which is external shading device installed for the purpose of energy savings in office buildings. For this, a building was chosen as a typical example, and the heat and lighting energy consumption was calculated by using the daylight and building energy analysis simulation. The results showed that the total energy consumption, when the lighting control was applied, was reduced by an average of 11.49[%] compared to when there was no lighting control. The smaller the glazing ratio is, the less the total energy consumption is. Also, the application of the horizontal louver increases the total energy consumption under the same condition of glazing ratio.

• International Journal of Advanced Culture Technology
• /
• v.8 no.1
• /
• pp.207-212
• /
• 2020

The human centric lighting (HCL) control is a major focus point of the smart lighting system design to provide energy efficient and people mood rhythmic motivation lighting in smart buildings. This paper proposes the HCL control using indoor surveillance camera to improve the human motivation and well-beings in the indoor environments like residential and industrial buildings. In this proposed approach, the indoor surveillance camera video streams are used to predict the day lights and occupancy, occupancy specific emotional features predictions using the advanced computer vision techniques, and this human centric features are transmitted to the smart building light management system. The smart building light management system connected with internet of things (IoT) featured lighting devices and controls the light illumination of the objective human specific lighting devices. The proposed concept experimental model implemented using RGB LED lighting devices connected with IoT features open-source controller in the network along with networked video surveillance solution. The experiment results are verified with custom made automatic lighting control demon application integrated with OpenCV framework based computer vision methods to predict the human centric features and based on the estimated features the lighting illumination level and colors are controlled automatically. The experiment results received from the demon system are analyzed and used for the real-time development of a lighting system control strategy.

• Korean Institute of Interior Design Journal
• /
• v.16 no.4
• /
• pp.110-118
• /
• 2007

Technology has been viewed at various stages of civilization as leading to future progress. The building, its services systems and management of the work process all contribute to the well-being of people within an organization. Productivity relies on there being a general sense of high morale and satisfaction with the workplace. Now buildings are considered as providing a milieu for human creativity. Flexibility, adaptability, service integration and high standards of finishes offer an intelligence threshold. Building Automation System(BAS) - controlled lighting systems may offer incremental energy saving. Conventional Lighting control systems often control equipment in a single room or over the limited area, because they are centralized control systems, which means that all the controlled circuits must be wired to a single control panel. The computers used by these systems are typically dedicated microprocess that perform only lighting control functions. By comparison, modern Building automation systems are distributed control system, which means that their computing hardware and software are distributed as a network that microprocessor-based control modules and standard PC. PLC(Programmable Logic controller) is extensible virtually without limits, so that all the lighting in a facility can be controlled by single, unified system - the same system that also can control and monitor the building's HVAC, security, and manufacturing processed, elevators, and more. A Building automation system can control light using schedules, manual controls, occupancy sensors, and photosensors, either singly or in combination. Building Lighting control and monitoring system will be for a energy saving and efficient building management system.

• KIEAE Journal
• /
• v.14 no.6
• /
• pp.81-86
• /
• 2014

In recent years, many researchers have considered the building energy consumption reduction accordingly to deal with abnormal climate changes and greenhouse gas reduction. However, the lighting energy use ratio has increased in spite of the development of the high efficiency lighting device. Therefore, the study aims to produce the LED lighting applications for the effective lighting heat removal by using the heat characteristics of LED lighting and analyzing the heat removal effect. In order to increase radiant heat efficiency, the heat pipe and heat sink was attached on PCB as LED lighting applications. Experiment was conducted to verify the temperature and air velocity of inside duct: thermocouples, anemometer. The heat removal effect of LED lighting applications was measured by observing the temperature of the lighting applications and the change of air velocity in duct. The experiment shows that the temperature change in the duct according to air velocity was $0.9{\sim}5.8^{\circ}C$. It is also concluded that heat removal was calculated from 33 to 81W.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.5
• /
• pp.37-40
• /
• 1995

In this paper, we investigate the daily load curve and yearly lighting hours of general and industrial Korean lighting apparatus. The daily load curve of lighting apparatus shows the peak use at 8 p.m. in general and 10 a.m. in industrial building. The yearly lighting hours are 2,948 hours in general and 4,066 hors in industrial building.