• 한국실내디자인학회논문집
• /
• 제25권4호
• /
• pp.147-155
• /
• 2016

In order to ensure a certain level of the quality of design, standardized evaluation indicators are being used as an objective criterion. Even though the evaluation indicators are quantifiable, limitations such as inefficiency and inconsistency caused by manual task in the evaluation process still have been found. BIM (Building Information Modeling) technology that is commonly adopted in architectural design process provides an environment which enables us to figure out a building model to be interpreted quantitatively with the basis of the building information model. It supports quantitative, consistent, accurate and quick evaluations so as to improve quality of design even in the initial design phase. This paper aims to establish BIM-enabled quantitative indicators and an evaluation framework to analyze building circulation even in early phase of design. The indicators are composed of 4 types (relative distance, accessibility, simplicity, pedestrian friendliness) and 7 sub-types. The evaluation framework is the process to derive Parameterized Path Value (PPV) as weighting on each indicator. For demonstrating the scalability of the suggested evaluation indicators and the framework, the authors implemented an evaluation tool and a case study has been carried out by using an actual building remodel project.

• KIEAE Journal
• /
• 제17권3호
• /
• pp.59-67
• /
• 2017

Purpose: As we are facing the global crisis from the climate change and energy depletion, urgent actions are needed to design a integrated sustainable building. This paper suggests that a sustainable design awards can stimulate for architects to bring the cutting-edge ideas into a realized building in comparison to green building certification system. AIA COTE Top 10 design awards, organized and run by AIA(American Institute of Architects) COTE(Committee on the Environment) from 1997, is analyzed as a case study. By researching the core of the AIA COTE Top 10 design awards system in terms of evaluation measures and submission requirements, meaningful suggestions were drawn to supplement Korea Green Building Awards system and to design and realize leading green buildings in Korea. Method: The comparison between AIA COTE Top 10 and Korea Green Building Design Awards was made in terms of evaluation measures, submission requirements, and green building certification systems. Result: This paper finally suggests the following three points in conclusion: 1) Set the standards of evaluation measures reflecting the three aspects(economy, environment, social) of sustainability, 2) Set the qualitative evaluation measures and corresponding submission requirements that can apply in the design awards in comparison to green building certification system, 3) Develop and balance submission requirements in response to evaluation measures to proceed systematic evaluation of the green buildings.

• 설비공학논문집
• /
• 제20권3호
• /
• pp.155-166
• /
• 2008

The performance evaluation of a new building is becoming more important because efficient design alone is often not sufficient to deliver an efficient building. However, there is a lack of standard evaluation methods to measure the energy performance of a new construction that has Energy Conservation Design Measures(ECDMs). This study presents an enhanced method based on calibrated whole-building simulation for evaluating the energy performance of new commercial buildings and demonstrates its use using a case-study building, including: an Energy Use Index(EUI) comparison with sub-metered data and an evaluation of the performance of specific ECDMs. The use of this method has determined that the case-study building was shown to use approximately 47% less energy than the base-case building that has the same shape and function as the case-study building(i.e., calibrated as-built simulation mode]), but doesn't include the simulated ECDMs.

• 한국농촌건축학회논문집
• /
• 제11권2호
• /
• pp.19-27
• /
• 2009

The purpose of this study is to develop an evaluation category and items for architectural design assessment in attempt to improve design of small scale buildings within Se-Jong City. Some of the domains in existing design assessment are building design, function, environment, and technology. The category and items developed in this study however, is composed to aim for the building's qualitative design assessment. Therefore the architectural assessment tool in this study includes design assessment of the building. Also, assessment category was comprised to verify the design expression used in improving the function and environmental condition of the building. The study was enforced by extracting raw data from existing architectural design related cases. Classification system and assessment category was developed and presented through combination of expert advice, survey, and sample test. In result of this study, the composition system required for design assessment can be divided into five large classifications ; public and harmony, access, form, environmental design, and space. Total of 24 assessment categories are developed and presented. The assessment category and standard presented in this study reflects the distinct regional characteristics and originality of Se-Jong city, creating one of a kind design assessment tool.

• Architectural research
• /
• 제16권3호
• /
• pp.93-100
• /
• 2014

Existing BIM(Building Information Modeling) based energy evaluation tools cannot be utilized enough for the potential performance of BIM because most of them have not provided the integrated model for energy evaluation, assessment of the material, cost of the construction, and so on. This research aims to propose and develop a new application, EcoBIM, to support an integrated evaluation of the energy and cost efficiencies of the design alternatives within the design process. The proposed application functions as a BIM-based evaluation system that calculates energy-savings performance as well as the construction cost of the alternatives at the design stage. This study mainly focuses on the possibilities of developing the proposed technology. We also suggest an advanced design process using the proposed system, corresponding to changes of national regulations in Korea. This study deduce that EcoBIM can allow architects to make suitable decisions regarding energy- and cost-efficient designs. The proposed design process will allow architects not only to check the eco-friendly performance of design alternatives but also predict the operation cost in a certain period in the future. EcoBIM can prevent large-scale design changes required to obtain environmental certification and enable the owner to make an informed decision about the initial investment of construction according to the result of the analysis of the energy requirement at the design stage.

• 한국멀티미디어학회논문지
• /
• 제18권9호
• /
• pp.1058-1067
• /
• 2015

Dweller's safety is one of the most important factors for the evaluation of building performance. The process of conventional safety design which is normally performed by the codes and designer's experiences is not enough to check the whole possibilities of unexpected accidents in the built environment. It means that the dwellers might be always exposed by the dangerous situation which should have been removed in the architectural design process. In order to solve this problem, this study intends to introduce a rule-based performance evaluation technology based on BIM(Building Information Modeling). The proposed technology focuses on the real time evaluation of dweller's safety in the ordinary life in the designed building alternatives and uses a commercial BIM tool as a design and evaluation platform.

• 한국CDE학회논문집
• /
• 제15권4호
• /
• pp.289-296
• /
• 2010

Energy consumption by buildings accounts for a large part of the world‘s energy consumption. Methods to analyze building energy consumption before construction have been studied for decades. With BIM (Building Information Modeling) technology, architects can easily export building information to data models in order to analyze the design‘s effect on building energy efficiency. Although several BIM-based energy simulation applications are currently available, utilizing these applications for energy efficiency simulation is difficult. In this paper, by comparing existing BIM-based energy applications, the authors test the building energy efficiencies estimated by some BIM models, offer ideas and solutions to problems that appeared during the test process and propose new methods for BIM-based energy evaluation based on quantitative factors.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제9권1호
• /
• pp.53-60
• /
• 2003

In this study, I investigate the critical evaluation elements at the architectural competition held nationwide in Germany. These evaluation elements, which can be regarded as the important design evaluation criteria, are selected by the design competition committee. Generally, in Germany the design competition committee consist of professors and famous architects who have theoretical and practical abilities with their own office. I classify and analyze the critical evaluation elements of seventy committee members, working on the selected nine prize-winners in Germany from 1997 to 2001. I conclude that the critical evaluation elements, ordered by frequency are : (1)circulation, (2)context, (3)function, (4)landscape & outside space, (5)organization of space, (6)arrangement of building, (7)form, arrangement of building, (7)form, (7)growth & change, (9)elevation design, (10)utilization of natural light. These design evaluation growth & change, (9)elevation design, (10)utilization of natural light. These design evaluation criteria for Hospital Architecture in Germany also can be applied to the evaluation methods of the korean Healthcare facility design.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.128-129
• /
• 2018

With the increase of tall building construction, efforts for enhancing constructability are required from the pre-construction stage. Therefore, in this study, we proposed an evaluation method of constructability performance by performing construction engineering activities at the design phase. Based on some results of previous studies, we estimated the importance of design factors and categories influencing the constructability in each engineering activity related to temporary work and then presented a method for evaluating the constructability performance of design alternatives.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1138-1143
• /
• 2005

As the importance of building maintenance is being emphasized, studies regarding the efficient building maintenance focus on the evaluation of the maintenance plan, implementation and its cost only while the evaluation of the maintenance performance is nearly ignored. At this point when the importance is placed on the performance design we need to have methods to improve maintenance performance of the buildings in Design Phase. The purpose of this study was to set the design evaluation items to improve the maintenance performance of the buildings. Through the review of the existing literature, we set the concept of the maintenance performance and suggested evaluation items to evaluate the maintenance performance through the analysis of domestic and overseas certification and design guidelines.