• Journal of the Korean housing association
• /
• v.13 no.4
• /
• pp.27-33
• /
• 2002

In Gumi area, the heating and cooling loads for underground building could have not been correctly evaluated since there were no systems accurate underground temperature. For solving this problem two ways of predicting the underground temperature were propose. Firstly, it is to estimate the underground temperature of Gumi area by averaging out the underground temperature of the areas around Gumi city. However, the underground temperature data of the areas around Gumi city was only limited to 0.5m and 1.0m under the ground. Secondly, it is to calculate the underground temperature of Gumi area by using a periodic equation with variable about underground properties. Among these methods, the method of the average date was more correct, but the method of the variable date was more available.

• Proceedings of the Safety Management and Science Conference
• /
• 2006.11a
• /
• pp.193-200
• /
• 2006

In case of domestic automobile manufacturers introduce and run a order production method, JIT system is to provide a necessary number of components for a right place timely which is a specific supply chain management is different from other occupations. This study is for establishing a efficient production planning and finding a management method to correspond with a manufacturing system and diversified supply chain management and building an information system to support it. For this, analyze the relevant business process and utilize various informations occur in supply chain of domestic automobile components manufacturer. It will contribute to not only reliability improvement of production management system but also satisfaction for due date of products.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.1
• /
• pp.52-61
• /
• 2007

The u-City is next generation IT-City which is to enhance the quality of life and convenience of life base on merger up-to-date communication infrastructure with u-IT services. To realize u-City, intelligent building is built for citizens to make a space of comfortable life. The intelligent building is possible to be constructed by communication infrastructure for various U-services. This paper mentions the ranges of communication infrastructure and shows how to construct it each range through regulation, law and technical. Lastly, the topics are suggested to build successfully u-City constructions in Korea.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.4
• /
• pp.22-28
• /
• 2010

This study analyzed the performance of passive solar system for office building. A unit model of the passive solar system was proposed in order to predict its performance under varying parameters and Seoul weather date. Steady state heat transfer equations were set up using a energy balanced equations and solved using a inverse matrix method. Numerical simulation program to analyze system was developed by using MATLAB. As the results, the passive solar system performance of office building was determined by the insolation and the outdoor air temperature. Also the passive solar system indicate 6.7~16.2% of annual average efficiency. In the comparison with other systems of the conventional wall, mass wall could reduce the heating loads of 7.1% and trombe wall could reduce heating loads of 11.5%. Through this study, performance of passive solar system for office building was verified by numerical method. Consequently, the passive solar system could operate an important role as the alternative for saving energy consumption of office building, and the additional studies should be made through the experimental method for the commercialization.

• Earthquakes and Structures
• /
• v.11 no.6
• /
• pp.983-1000
• /
• 2016

To date the engineering community has seen facade systems as non-structural elements with high aesthetic value and a barrier between the outdoor and indoor environments. The role of facades in energy use in a building has also been recognized and the industry is also witnessing the emergence of many energy efficient facade systems. This paper will focus on using exterior skin of the double skin facade system as a dissipative movable element during earthquake excitation. The main aim of this study is to investigate the potential of the facade system to act as a damper system to reduce earthquake-induced vibration of the primary structure. Unlike traditional mass dampers, which are usually placed at the top level of structures, the movable/smart double skin facade systems are distributed throughout the entire height of building structures. The outer skin is moveable and can act as a multi tuned mass dampers (MTMDs) that move and dissipate energy during strong earthquake motions. In this paper, using a three dimensional 10-storey building structure as the example, it is shown that with optimal choice of materials for stiffness and damping of brackets connecting the two skins, a substantial portion of earthquake induced vibration energy can be dissipated which leads to avoiding expensive ductile seismic designs. It is shown that the engineering demand parameters (EDPs) for a low-rise building structures subjected to moderate to severe earthquakes can be substantially reduced by introduction of a smart designed double skin system.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.137-143
• /
• 2014

Recently, as new paradigm for government operation called government 3.0, government is actively operating policy opening and sharing public data. In addition, the Ministry of Land are operating an open platform integrated map service (the VWorld) which provides a variety of video contents such as the country's national spatial information, traffic information and three-dimensional building for the public. According to W3C Foundation's Open Data Status Report(2013), our country has the evaluated results that the part of the government's policy support and planning is good while the part of the data management is vulnerable. So our country needs the quality improvement for the data management. In addition, a digital aerial photograph image data is required to be up-to-date for the three-dimensional spatial object data. In this paper, we present the method for enhancement of the accuracy of vertical position and for maintainment of up-to-date vertical position. Our methods evaluate the data quality and analyze the cause of error of measurement utilizing the national standard quality assessment method. The result of research shows that the accuracy of vertical position is improved if the height of the building captain is adjusted by the quality assessment values and a three-dimensional model has up-to-date data if reconstruction and extension information of construction register is utilized.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.730-739
• /
• 2005

A common problem encountered in product or process design is the selection of optimal parameter levels which involve simultaneous consideration of multiresponse variables. A multiresponse problem is solved through three major stages: data collection, model building, and optimization. To date, various methods have been proposed for the optimization stage, including the desirability function approach and loss function approach. In this paper, we first propose a framework classifying the existing studies and then propose some promising directions for future research.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.168-169
• /
• 2015

SMART Frame is a composite precast concrete structure system to deliver the advantages of both steel frame and reinforced concrete. Many studies have established to date that SMART Frame is more advantageous than conventional frame-type structure in terms of structural stability, constructability, economic viability as well as reduction of construction schedule. However, such studies have focused primarily on wall-type or flat slab-type apartment housing structures, failing to include Rahmen structures in their scope. Accordingly, this study aims to analyze the benefits of potential application of SMART Frame to RC Rahmen structures. As the structural stability and constructability of SMART Frame is already proven, this study reviews its benefits from the perspective of cost reduction. Conclusion of this study will be used subsequently in predicting the benefits of SMART Frame when it is adapted to RC Rahmen structures.

• Journal of the Korean housing association
• /
• v.13 no.2
• /
• pp.1-6
• /
• 2002

As a result of rapid economic and social change, the number of large-scale builing is expected to increase. In response to the growing increase, It will be a greater demand for up-to-date for heating and cooling, illumination, communication and disaster protection system as well as a sharp rise in overall energy consumption. Gradually the living of apartment building is increasing by growing population. In basic data will be offered for the energy conservation programs, and establishing some standards for the energy consumption in future. By understanding how energy sources are actually utilized in existing apartment houses, we can develop more appropriate strategies to maximize both the efficient use of energy and its conservation.

• Journal of the Korea Furniture Society
• /
• v.21 no.1
• /
• pp.17-25
• /
• 2010

Three buildings -Jibokjae, Hyubgildang and Palujung- are connected each other and consist of a library and reception complex for royal kings at Kyungbok Palace in Seoul. Jibokjae and Hyubgildang were known to have been moved from Changdok Palace in A.D. 1891. No construction records have been known for Palujung. In 2004, during repair of three buildings, a dendrochronological analysis was conducted to examine their building histories. We took 67 wood samples for dendrochronological analysis; 20 from Jibokjae, 37 Hyubgildang and 10 Palujung, respectively. The results showed that the felling dates of Jibokjae and Hyubgildang woods were A.D. 1877-1879/1880, indicating original construction of two buildings at early 1880s. Felling dates of Palujung were 1886-1889/1890, those of roof filling timbers 1890 and the connection part between Hyubgildang and Jibokjae 1886, confirming 1891's movement of Hyubgildang and Jibokjae and adding a new building, Palujung.