• Title/Summary/Keyword: Builder

Search Result 335, Processing Time 0.023 seconds

CLOVES: a Virtual World Builder for Constructing Virtual Environments for Science Inquiry Learning (클로브스: 과학 탐구 학습을 위한 가상환경 저작도구)

  • Cho Yong-joo
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.9 no.2
    • /
    • pp.268-276
    • /
    • 2005
  • This paper presents the motivation, design, and a preliminary evaluation of a virtual world builder, CLOVES. CLOVES is designed to support rapid construction of data-rich virtual environments and instruments for young children's science inquiry teaming. It provides a three-tiered programming Interface: a visual design environment, scripting layer, and low-level application programming interface targeting for multiple levels of programming expertise. It is also intended to be a collaborative medium among interdisciplinary domain experts such as educators, 3D modelers and software developers. A preliminary case study was conducted to evaluate the capabilities and effectiveness of CLOVES. The results showed that designers actively participated in decision making at every stage of the design process and shared knowledge among one another.

A Study on Change of the Apartment Storage Space (아파트 수납공간의 양적변화에 관한 연구)

  • 박영순
    • Journal of the Korean Home Economics Association
    • /
    • v.27 no.1
    • /
    • pp.97-109
    • /
    • 1989
  • The purpose of this study was to find out change of the apartments stouge space in Seoul area from 1971 to 1988. It also attempts to compare the storage space in the apartment with the optimum storage space which is suggested by precedent studies on the storage space. Content analysis methods were used to analyze 961 apartment floor plan from the booklet of 'Apartment Information'. The major findings were as follows : 1) According to the precedent studies, optimum storage spaces are 3.86∼7.72㎡ for 66.07∼115.61㎡ house, and 14.23∼20.31㎡ for 115.62∼165.15㎡ house. 2) It was found out that the storage spaces of the apartments were increased until 1977∼80 and decreased after 1980. 3) Comparing the storge space with the optimum standard, most of the apartments have not enough storage space. It offers only 50% of optimum storage space. 4) The percentage of installation of storage space in bedrooms were quite low in general. Specially, bedrooms in small apartment under 66.6㎡ and most master bedrooms didn't storage spaces. 5) The sige of the apartment storage space were variant according to the builder. Only one builder from 8 offered the spaces close to the optimum standrd, and others didn't seem much care for the storage space.

  • PDF

Performance Analysis of UWB System using S-Function Builder (S-Function Builder를 이용한 UWB 시스템의 성능해석)

  • Lee Sung-Sin;Byon Kun-Sik
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.9 no.3
    • /
    • pp.516-521
    • /
    • 2005
  • The application of UWB not only complies with the requirements of remote sensors system(ECG), it also contributes to the effectiveness of the implementations through its unique qualities such as ultra low transmission power - an important factor when dealing with biomedical equipment. In this paper, the aim is to replace the wired ECG sensors with a wireless link and design wireless UWB communication system. The various pulse shapes are presented that satisfies the FCC spectral mask and FCC part 15 rule. It is shown that UWB can be a high rate transmission over short ranges using Rake receiver, with the capability for reliably transmitting 100Mbps over distance at about 10 meters.

A Generic BIST Builder of Multiple RAM Modules Embedded in ASIC Chips (ASIC에 실장되는 다중 RAM 모듈 테스트룰 위한 BIST 회로 생성기의 구현)

  • Chang, Jong-Kwon
    • The Transactions of the Korea Information Processing Society
    • /
    • v.5 no.6
    • /
    • pp.1633-1638
    • /
    • 1998
  • In this paper we propose a generic BIST builder for the Embedded Multiple HAM modules in ASICs, The BlST circuitry is automatically generated according to the specification of the target RAM Modules and the applying test algorithms to them. The lJIST is designed using the TOP-DOWN technique and, thus, has the several advantages in the area of the selection of test algorithm, the development of the circuitry, and the reuse of the circuitry, In addition, we have modified the existing serial interiacing approach to obtain smaller additional BlST circuitry and higher fault coverage and better B1ST sharing of the target RAM Modules in ASICs.

  • PDF

Design and Implementation of an Automated Building System for Cyber School (사이버스쿨 자동 구축 시스템 설계 및 구현)

  • Kim, Chang Suk
    • The Journal of Korean Association of Computer Education
    • /
    • v.3 no.1
    • /
    • pp.1-12
    • /
    • 2000
  • Recently, Linux operating system is used for web server environment, but to build web server applications need to be operated many related softwares, such as installing web server, web and database system integration and programming for script language. Most of schools in korea do not have computer specialist for building web server or cyber school. In this paper, we describe design and implementation of an automated building system(AnyBuilder) for cyber school. AnyBuilder build web-based cyber school system, just clicking a few of button and some commands. Especially, it has two phases to build cyber school, one is to generate empty web-based cyber school and the other is to upload contents of lecture.

  • PDF

Improved Clay Process for Builder-grade Zeolite Synthesis by Acidic Benification (광산 용출에 의한 Builder급 Zeolite점토 합성법)

  • 서정권;정필조
    • Journal of the Korean Ceramic Society
    • /
    • v.25 no.6
    • /
    • pp.685-693
    • /
    • 1988
  • From leaching of Korean native halloysite with hot sulfuric acid, active species of siliceous aluminosilicate are obtained as residue, which gives the mole ratio of SiO2/Al2O3 10 and substantially removes most acid-soluble impurities. By dissolving the residue in sodium hydroxide at an ambient temperature sodium silicate solution is prepared, this is used for zeolite synthesis as one of starting materials. In order to prepare zeolite Type 4A thereform, addition of a proper aluminum source is made so that the composition of the reactant materials may be of the following mole ratios : Na2O/SiO2=1.2-1.5, SiO2/Al2O3=1.8-2.0 and H2O/Na2O=34-45 By careful control of ageing time and temperature, subsequent crystal growth is induced into microfine zeolite 4A, which gives optimum particle size distributjion being suitable for detergent builder. The zeolite products thus obtained and highly competitive with those from the use of the refined clay in comparison of their calcium exchange capacity, whiteness and particle size distribution. The present method shows a marginal advantage over the existing procedures requiring neitherseparate purification nor calcinating otherwise necessary for the raw clay ores in use.

  • PDF

An Efficient Application of eBSS DRM Method to eBook Contents based on ePub 3.0 for Smart Device

  • Jun, Eung Sup
    • Journal of the Korea Society of Computer and Information
    • /
    • v.21 no.12
    • /
    • pp.59-72
    • /
    • 2016
  • DRM(Digital Rights Management) is essential for the copy right protection of eBooks based on ePub 3.0 by IDPF. In this paper, we developed eBSS(eBook Service System) as ePub 3.0 builder and viewer system with DRM and proposed an efficient DRM method which improves the performance of contents generation, security and distribution system. The efficient application of DRM method to the eBook contents based on ePub 3.0 for smart phone is practically useful for eBook service system. It is very useful for the suggested eBSS with DRM method and strategy to apply easily and practically to the encryption and decryption of the eBook contents. Also, it is very efficient to generate the ePub 3.0 contents and to apply DRM method to it especially, by using practically this suggested ePub 3.0 builder system from the view point of the eBook content generation and its viewer such as eBook reader for user and eBook providers.

A STUDY ON THE PROCESS OF LARGE-SCALE REPAIR OF A CONDOMINIUM

  • Seki, Eiji;Akiyama, Tetukazu
    • Proceeding of Spring/Autumn Annual Conference of KHA
    • /
    • 2002.11a
    • /
    • pp.295-300
    • /
    • 2002
  • Since the contents of large-scale repair of a condominium were various, a plan document was not prepared. The owners association of the condominium has given priority to decision-making of price priority over quality. Examination is not performed about the contents of the construction supervision business, which checks whether suitable construction is performed, either. On the other hand, the know-how for builders, such as decision of the process plan under which the repair work lessens influence to the safety and life as much as possible since the place where the resident is living turns into a construction site, and selection of a method of construction, is just going to ask. It is an important subject how the structure of the construction contractor selection, which considered quality, is built. Then, this research focuses on large-scale repair construction of the condominium, and arranges the actual condition of a series of processes from plan document creation to construction supervision. The method of research collects the construction documents of the condominium that carried out Barge-scale repair construction. Next, collection arrangement of the data of construction builder selection is carried out. The method of the construction builder selection of those other than a construction price is examined. The method of quality control of large-scale repair construction is examined.

  • PDF

Design and Validation of MAC Protocol for B-WLL System (B-WLL 시스템 MAC 프로토콜의 설계 및 검증)

  • Back, Seung-Kwon;Kim, Eung-Bae;Han, Ki-Jun
    • Journal of KIISE:Computing Practices and Letters
    • /
    • v.8 no.4
    • /
    • pp.468-478
    • /
    • 2002
  • In this paper, we designed a B-WLL MAC(Media Access Control) protocol and validated its operation for implementation of high-speed subscriber networks. Our MAC protocol was designed by SDL using the DAVIC specifications based upon the variable contention/reserved time slot allocation algorithm. For validation of our MAC protocol, Syntax and semantic error check were performed by the Simulation Builder of ObjectGeode and the MAC(Message Sequence Chart) respectively. The validation results showed that our B-WLL MAC protocol is working correctly and may successfully support B-WLL services.

Web-based XML Tree Builder for XML Service Program Development (XML 웹 서비스 프로그램 개발을 위한 웹 기반의 XML Tree 생성)

  • Park Young-Soo;Chang Duk-Chul
    • The KIPS Transactions:PartD
    • /
    • v.12D no.5 s.101
    • /
    • pp.765-772
    • /
    • 2005
  • For the excellent U web services, the program developers should create both user's client program and the sewer program Recently, the structural alteration of programs are often caused by infernal and external environment concerned with social trends and preferences as well as user's requirements expectations. So, for reducing the development time and workload of XML web service programs, it is necessary to develop the web program generation tools. This paper suggest how to design and implement the web-based XML Tree builder, which was able to provide the information for promptly and easily generating the XML Schema, XML Stylesheet and XML Document through the XML Development Supporting Server System.