• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.151-153
• /
• 2007

In this paper, the control method of extracting maximum power from the seaflow energy is proposed. This system consists of buck-boost converter, bridge diode. The control is performed by using the variable duty ratio control of buck-boost converter. For extracting maximum power, it is necessary to know the seaflow turbine's maximum power curve and the seaflow speed measurement. But this makes the system difficult and expensive to implement. So this paper proposes the MPPT control method where the seaflow speed and the maximum power curve of the seaflow turbine are not required. The effectiveness of algorithm is simulated based on Matlab $Simulink^{(R)}$.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.493-498
• /
• 2004

The EMI noise source in a switching mode power supply is dominated by a common mode noise. If we can understand the common mode noise occurring mechanism, it is resulted to find out the method to suppress the EMI noise source in the switching mode power supply. The common mode noise is occurring mostly due to circuit is unbalanced which is caused by the capacitive coupling to frame ground, which passes through a heatsink of the switching devices. This research paper presents a new effective balancing method of buck converter circuit by mean of grounding the parasitic and compensation capacitors in correct proportion which is called that the common mode impedance balance (CMIB). The CMIB can be achieved by source, transmission line and termination balanced, such balancing, the common mode current will be cancelled out in the frame ground. The greatly reduced common mode noise can be confirmed by the experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.195-197
• /
• 1995

In this paper, for a constant switching frequency, the configuration and the control strategy of the resonant buck-boost type converter are proposed by the combination of zero voltage switching(ZVS) and zero current switching(ZCS) with PWM method. Also, in the configuration of power control circuit, transformer is not used in the viewpoint of economy. And the circuit has fewer power switching elements than a general resonant power converter, simulation results and experiments make show the advantages mentioned.

• 한국의상디자인학회지
• /
• 제4권2호
• /
• pp.5-29
• /
• 2002

This study was to analyze the social identity described in the dress of the American novelist Pearl S. Buck's (1892-1973) major works. A novelist pursues varying and refined expressions in an effort to convey to readers the character' identities of his or her own creation. In particular, Pearl S, Buck was a great writer who was awarded the Novel Literature Prize, and since her work The Good Earth recorded a world-wide bestseller, she might well be called a popular novelist. She depicted well her characters' identities from divers viewpoints with her unique delicacy and realistic expressions. For this study, the following seven works which are considered to feature the dresses for character's identity well were selected out of her 85 works: The Good Earth (1931), Sons(1932), The Mother (1934), A Housed Divided (1935), The Hidden Flower (1952), Love and the Morning Calm (1953) and Letter from Peking (1957). For an analytical tool, the content analysis method was used. In order to systematically review the social identity described in the dress individuals' identity were classified into the following categories based on the identity theories: Social identity were divided into ① age identity ② sex, gender identity ③ economic identity ④ occupational identity ⑤ political identity ⑥ religious identity ⑦ kinship identity ⑧ regional identity. The characters' age identity, sex, gender identity, economic identity, occupational identity, political identity, religious identity, kinship identity, regional identity were depicted by their dresses and physical features. All in all, it is hoped that this study would provided important cues to the understanding of the other party's identity through his or her dresses in mutual relationship: It is believed that this study would be useful because they are arranged through the analysis of the dresses featured in the great writer's works using a consistent framework of analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.401-404
• /
• 1989

In this paper an optimal LQ controller is designed for the output characteristic improvement of buck-type switching regulators. State-space averaging method is adopted for modelling of switching regulators. The LQ controller is derived via an unified operator form for the application to both continuous-time and discrete-time control systems. Some design parameters of the LQ controller are chosen through a computer simulation and the LQ controller is implemented by analog circuits.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2653-2655
• /
• 1999

A technique to suppress the low frequency ripple voltage of the DC output voltage in three-phase buck diode rectifiers is presented. A pulse frequency modulation method is employed to regulate the output voltage of the rectifier and guarantee zero-current switching of the switch over the wide operating range. The pulse frequency control method used in this paper shows generally good performance such as low THD of the input line current and unity power factor. In addition, the pulse frequency method can be effectively used to suppress the low frequency voltage ripple appeared in the dc output voltage. The proposed technique illustrates its validity and effectiveness through the respective simulations and experiments.

• 대한산업공학회지
• /
• 제26권3호
• /
• pp.257-264
• /
• 2000

This research suggested a method by which the driver space can be designed to best accommodate the driver's anthropometric characteristics. Three-dimensional manikins and a variable seating buck were developed and used for this study. Manikins were designed with 18 links comprising the 95th percentile male and 5th percentile female data. The seating buck was built to create various driving environments using the distance and the height between the H-point(hip pivot) of the seat and the AHP(accelerator heel point), the angle of the back rest, the angle of the steering wheel, the vertical distance of the steering wheel, and the location of the T.G.S.(transmission gear shift) knob. Measurements of each variable were collected with a coordinate measuring machine by positioning the 3-D manikin under various combinations of the design factors of the seating buck, which was constructed based on mid-size domestic passenger cars. The data were then converted to the joint angles of the driver. The combination of the measurements for an optimal driving environment is suggested by applying sets of the joint angles at which the driver feels comfortable.

• 전력전자학회논문지
• /
• 제5권2호
• /
• pp.154-162
• /
• 2000

본 논문에서는 3상 강압형 다이오드 정류기에서 출력전압의 저주파 리플 전압을 감소시키기 위한 새로운 제어기법을 제안한다. 제안한 펄스 주파수 변조 기법은 강압형 다이오드 정류기의 출력전압과 넓은 부하 범위에 대한 주 스위치의 영전류 스위칭을 보장하기 위해 적용된다. 본 논문에서 적용된 펄스 주파수 변조 기법은 일반적으로 입력전류의 낮은 고조파의 단위 역률의 장점을 지니고 있다. 또한 출력전압에서 보여진 저주파 리플전압을 감소시키기 위해 효과적으로 사용되어진다. 제안된 제어기법을 자세하게 설명하며 그 타당성을 검증하기 위해 시뮬레인션 및 실험을 통하여 검증한다.

• 한국통신학회논문지
• /
• 제34권7A호
• /
• pp.568-573
• /
• 2009

본 논문에서 0.13um CMOS 공정으로 설계된 배터리 기반 휴대용 통신 시스템 구동용의 온칩 시동회로를 갖는 스텝다운 CMOS DC-DC 변환기를 제안하였다. 1MHz의 스위칭 주파수를 기반으로 설계된 벅 변환기에는 온칩 시동회로와 커패시터 멀티플라이어 기법을 이용한 보상회로를 포함시켰다. 칩 측정 결과 2.5V ${\sim}$3.3V의 입력 전압을 1.2V로 강압시키는데 최대 87.2%의 효율을 갖는다. 최대 부하 전류, 출력 전류 리플 및 전압 리플은 각각 500mA, 25mA, 24mV 이다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.31-33
• /
• 2008

A novel lossless current sensing technique for a synchronous buck converter is presented. The inductor DCR method is generally used as a low cost and lossless current sensing technique of DC/DC converters. It is however difficult to obtain the accurate current value for the conventional DCR method because the inductor resistance varies depending on the operating frequency. In order to overcome this problem, an improved current sensing technique is proposed, which has the separated DC and AC sensing circuits. The concept and operation of the proposed method are explained and the experimental results are provided to show its effectiveness.