Bubble growth on microheater has been experimentally investigated in this study. The experiment was performed using platinum micro heaters having dimensions of $100{\times}10{\times}0.2{\mu}m^3$ with constant heat flux. A high speed video camera was used to observe bubble growth at 250 frames per second. Microheater temperature was measured at the rate of 300Hz with a data acquisition system. When heater temperature was $139^{\circ}C$ a bubble was nucleated in the liquid FC-72. The temperature profiles and the high speed camera images were combined to explain heat transfer and bubble growth on microheater.
The bubble motion during nucleate boiling in a microchannel is investigated by numerically solving the equations governing conservation of mass, momentum and energy in the liquid and vapor phases. The liquid-vapor interface is tracked by a level set method which is modified to include the effects of phase change at the interface and contact angle at the wall. Also, the evaporative heat flux from the thin liquid film that forms underneath a growing bubble attached to the wall is incorporated in the analysis. Based on the numerical results, the effects of channel size, contact angle, wall superheat and waiting period on the bubble growth and heat transfer in a microchannel are quantified.
아직까지 많이 알려지지 않은 마이크로버블을 사용하여 우리나라 대표 작물인 인삼재배에 적용하였다. 고년근에 적용하여 결과를 확인하기 위해서는 비용과 시간 소요가 많아 종묘삼을 활용하여 생리적 변화를 측정하고 분석하였다. 최근 뿌리 작물에 기능성이 있다는 산소수 일반 재배농가에서 사용해보았지만 그 결과가 미미하고 오히려 해를 입는 경우도 생기게 되었다. 다른 작물의 선행결과와 본 연구결과를 볼 때 마이크로 버블을 사용한 인삼재배는 파급효과 있을 것으로 사료된다. 중화제 및 약제를 활용하여 만든 산소수와는 다른 개념으로 마이크로 버블은 공급 장치를 통해 우리가 이용하는 공기를 아주 작은 버블로 압축하여 인삼에 제공함으로써 저해 없이 특이성 성장을 이끌어 내었다. 연구결과로부터 설정된 종묘삼의 생장 특성 및 세분화별 적정범위 및 적정치를 결과와 비교하면, 그동안 이루어졌던 관행농법에서 사용되는 일반수와 마이크로 버블(Micro bubble)수를 사용하여 재배한 결과는 10%에서 15%의 인삼생장을 나타내었다. 이후로 마이크로 버블수를 생산할 때 시간별 용존 산소량을 측정하여 마이크로 발생장치의 최적 시간을 설정하고 최적화 설정을 위해서는 관계시간과 에너지 효율 및 토양의 영양환경에 대한 변화에 대해서도 더욱 많은 연구가 필요하고 사료되며, 더불어 생체 및 중량이 증가된 만큼 인삼의 주요 성분인 진세노사이드의 증감에 대한 분석 등 추가 연구가 활발하게 이루어져야 할 것이다.
Micropump is very useful component in micro/nano fluidics and bioMEMS applications. In this study, a bubble-powered micropump was fabricated and tested. The micropump consists of two-parallel micro line heaters, a pair of nozzle-diffuser flow controller and a 1 mm in diameter, 400 ${\mu}m$ in depth pumping chamber. The two-parallel micro line heaters with 20 ${\mu}m-width$ and 200 ${\mu}m-length$ were fabricated to be embedded in the silicon dioxide layer of a wafer which serves as a base plate for the micropump. The pumping chamber, the pair of nozzle-diffuser unit and microchannels including the liquid inlet and outlet port were fabricated by etching through another silicon wafer. A glass wafer (thickness of $525{\pm}15$${\mu}m$) having two holes of inlet and outlet ports of liquid serve as upper plate of the pump. Finally the silicon wafer of the base plate, the silicon wafer of pumping chamber and the glass wafer were aligned and bonded (Si-Si bonding and anodic bonding). A sequential photograph of bubble nucleation, growth and collapse was visualized by CCD camera. Clearly liquid flow through the nozzle during the period of bubble growth and slight back flow of liquid at the end of collapsing period can be seen. The mass flow rate was found to be dependent on the duty ratio and the operation frequency. As duty ratio increases, flow rate decreases gradually when the duty ratio exceeds 60%. Also as the operation frequency increases, the flow rate of the micropump decreases slightly.
This paper reviews the history of the birth and development of the skyscraper in Japan, mainly from the perspective of the legal system, and presents the following points: 1) After 1919, building height was limited to 31 m or less, which continued after the war and defined the skyline of Japan's major cities; 2) The 31-meter height limit became a problem during rapid economic growth. With the development of tall building construction technology, the height limit was eliminated, and skyscrapers were born in Japan in the 1960s; 3) Later, the number of skyscrapers increased more rapidly in the post-bubble period after the collapse of the bubble economy in the 2000s than in the boom years of the 1980s, when the floor-area ratio was relaxed for economic uplift and urban renewal. The number of skyscrapers increased rapidly against the backdrop of the deregulation of the floor-area ratio.
본 연구는 환경정화에 주로 사용되는 미세기포를 2년 근 인삼 지속적으로 처리하여 인삼이 성장하면서 변화되는 형태와 ginsenoside 변화를 조사하는 융합적 연구이다. 인삼 재배시 미세기포수를 적용하여 4개월 동안(120일) 재배한 후 인삼의 잎과 뿌리의 부위별 ginsenoside 함량과 조성을 분석하였다. 잎에 일반수를 처리한 결과 protopanaxatriol(PPT) 계열 Re 함량만 월등히 높게 나타났지만 미세기포수를 처리한 결과 protopanaxadiol(PPD) 계열 Rb1, RC, Rb2, Rd 성분도 같이 증가시키는 것을 확인하였다. 특히 Re, Rb1이 다량 증가함으로써 전체적인 total ginsenoside가 증가하는 요인이 되었다. 인삼의 부위별 PD/PT 비율은 미세기포수를 처리한 잎에서는 0.811으로 나타나고 뿌리는 1.28로 나타났다. 이것은 미세기포수 처리가 뿌리에서 ginsenoside의 합성을 유도하여 PD/PT 비율이 1과 가까운 결가를 가져와 유용성분의 증가 및 고른 분포 이루어졌다고 판단된다. 따라서 미세버블수를 사용한 고품질 인삼을 생산하는 재배 방법을 제시하고 인삼의 뿌리와 더불어 잎도 기능성 식품 소재로 활용할 수 있는 가능성을 제시하였다.
송이균사의 대량배양에 적합한 공기부양식 생물반응기 형태를 찾고자 풍선형 및 칼럼형의 공기부양식 생물반응기와 external-loop형의 기포통기식 생물반응기에서 송이균사체를 심부배양하여, 반응기 형태별 송이균사체의 생장특성을 비교하였고, 반응기 형태가 세포에 주는 스트레스 정도를 비교하기 위하여 배양기 형태별 균사체의 에르고스테롤의 함량 변화를 비교하였다. 반응기 형태별 송이 균사체의 생산량은 풍선형 생물반응기에서 평균 12g, external-loop형의 기포통기식 생물반응기에서 평균 11.4g, 칼럼형 생물반응기는 평균 9.5g을 생산하여, 풍선형 생물반응기가 가장 우수하였다. 생장기간도 풍선형 생물반응기에서 균사 접종 후 16일 이후부터 정체기에 이르는 것으로 20일 이후에 나타난 칼럼형 및 기포통기형 생물반응기 보다 빠르게 생장하는 것으로 나타났다. 균사체의 생장시기별 에르고스테롤의 함량은 풍선형 공기부양식 생물반응기에서 가장 높이 나타났으며 이어서 칼럼형, 기포통기식 순으로 나타나, 송이 균사체 배양시 반응기 형태에 의한 물리적 스트레스는 풍선형 공기부양식 생물반응기가 가장 적게 받는 것으로 추정되었다. 송이 균사체 배양에 가장 적합한 공기부양식 생물반응기의 형태는 풍선형인 것으로 추정 할 수 있었다. 그러나 칼럼형 및 풍선형 공기부양식 생물반응기는 스파자 부근에서 균사체가 침적, 착생하여 점차 크게 뭉쳐 성장하면서 공기공급을 차단하는 현상이 있었으나 external-loop형의 기포통기식 생물반응기에서는 유체의 순환으로 이러한 현상은 적게 나타나 대용량의 송이 균사체 배양에 적합한 반응기 형태로는 배양기의 상부가 풍선형 반응기의 형태를 유지하고, 스파자가 위치한 하부는 external-loop형의 기포통기식 생물반응기의 유체 순환식 형태를 유지하도록하는 혼합형의 형태가 좋을 것으로 추정되었다.
There are similarities between Korea and Japan in terms of national planning and development system and housing policies. Japan has suffered from great shifts of social and economic systems due to skyrocketing land prices for three times and the collapse of the bubble economy after the Second World War. The study reviews historically important changes in the national territory and housing policies for last 60 years in Japan. It also investigates changing trends and characteristics of many socioeconomic indicators with regard to population, housing and other fields in response to these policies. First of all, Japan has experienced significant economic growth before and after the 1960's, and the era of national rebuilding projects in the 1970's. After then, the period of the bubble economy has emerged since 1980; however, it suffered from skyrocketing land values between the late 1980's and the early 1990's, and the collapse of Japanese bubble economy in the early 1990's. In response, many urban regeneration policies and projects were proposed to recover the national economy since 2000. It is found that these national territory development and housing supply policies throughout the country have been influenced by the changing characteristics of social and economic conditions. Since the housing supply ratio in 1968 reached up to around 100% on average, Japan has been focusing attention to improving the residential and living quality for existing housing stock rather than supplying new housing units through large-scale new town projects. These experiences are full of helpful suggestions for our future housing and urban regeneration policies as we reach to more than 100% of housing supply ratio on average.
According to IHS, the overall display market is expected to grow at an average annual rate of 6% from $ 104 billion in 2016, to $ 138 billion in 2021. Among them, the OLED display panel will grow from $ 15 billion to $ 41 billion over the same period, forecasting a high annual growth rate of 22%. However, the refraction index, light leakage, bubble generation, adhesion deterioration, peeling phenomenon, moisture resistance, light transmittance, low turbidity. OCA (optically clear adhesive), which solves problems such as improving the resistance of the conductive film, is largely dependent on imported products. In addition, in 2016, the world market is worth KRW4.3 trillion, and the adhesive market has a large market effect. In this study, we tried to analyze the technical competitiveness of patent and thesis by classifying OCA (optically clear adhesive, optical adhesive) for display panel by curing method. As a result of the study, the amount of patents and papers in Korea was found to be superior to other competitors, but the quality level was low. In particular, it was found that the achievements of the papers in the hot melt field are lacking and the government should expand its support.
The adventitious root of Panax ginseng C.A. Meyer is regarded as an efficient alternative to cell culture or hairy root culture for biomass production due to its fast growth and stable metabolite production. To determine optimal culture conditions for the bioreactor culture of ginseng roots, experiments have been conducted on physical and chemical factors such as bioreactor type, dissolved oxygen, gas supply, aeration, medium type, macro- and micro-elements, medium supplement during culture period, sucrose concentration, osmotic agents, medium pH and light. Elicitation is a key step to increase ginsenoside accumulation in the adventitious roots but biomass growth is severely inhibited by elicitor treatment. To obtain high ginsenoside content with avoiding biomass decrease, we applied two-stage bioreactor culture system. Ginseng adventitious roots were cultured for 40 days to maximize biomass increase followed by elicitation for 7 days to enhance ginsenoside accumulation. We also experimented on types and concentrations of jasmonate to determine optimal elicitation methods. In this paper, we discussed several factors affecting the root propagation and ginsenoside accumulation. Based on the results obtained from previous experiments we have established large-scale bioreactor system (1 ton-10 ton) for the efficient production of ginseng adventitious roots and bioactive compounds including ginsenoside. Still, experiments are on going in our laboratory to determine other bioactive compounds having effects on diet, high blood pressure, DPPH elimination and increasing memories.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.