• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.1 s.232
• /
• pp.151-158
• /
• 2005

A characteristic of discharge for a foam spray nozzle with various parameters was investigated. The discharge patterns from a fire foam spray nozzle are important to evenly spray over a maximum possible floor area. Two parameters of a foam spray nozzle were chosen, and compared with those from the standard one. Also, in order to evaluate the performance of discharged foam agents used to protect structures from heat and fire damages, the thermal characteristics of fire-protection foams were experimentally investigated. A simple repeatable test for fire-protection foams subjected to fire radiation was developed. This test involves foam generation equipment, a fire source for heat generation, and data acquisition techniques. Results show that the bubble size of foam is increased by large inside diameter of orifice or closed air hole, but phenomenon of discharge angle and expansion ratio is opposite. For the case of the open air hole, liquid film of a circular cone discharges with formation, growth, split and fine grain. In case of the closed air hole, a pillar of foam solution discharges with that. Though the temperature gradient in the foam increases with increased foam expansion ratio. it is not change with increased intensity of heat flux.

• Current Industrial and Technological Trends in Aerospace
• /
• v.9 no.1
• /
• pp.15-26
• /
• 2011

The airliners are replacing their old fleet by brand new ones while the air traffic has recovered from the great recession. And the delivery and the backlog get almost highest record still in 2010. The single aisle leads the market and it will show harder competition with more efficient challengers. The recent strong demand of new aircraft reduces MRO and lease market and it makes some worries about the bubble in civil aircraft industry. In the long time forecast, the civil aircraft industry will grow steadily with over 60,000 delivery for 20 years. and the commercial aircraft market will be about 31,000~34,000 of them. And the emerging market will lead the growth.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.2
• /
• pp.31-35
• /
• 2009

In the silicon wafer polishing process, the mounting stage of silicon wafer on the ceramic carrier block has been using the polishing template which utilizes the porous surface instead of traditional wax mounting method. Here in this article, the experimental study is carried out in order to study the wafer demounting by water jet and the effects of operating conditions such as the water jet flowrate and the number of water jet nozzles on the wafer demounting time. It is found that the measured wafer demounting time is inversely proportional to the water flowrate per nozzle, regardless of number of nozzles used; implying that the stagnation pressure by the water jet impingement is the dominant key factor. Additionally, by using the transparent disk instead of wafer, the air bubble formation and growth is observed under the disk, making the passage of water flow, and subsequently demounting the wafer from the porous pad.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.3
• /
• pp.75-84
• /
• 2018

According to IHS, the overall display market is expected to grow at an average annual rate of 6% from $ 104 billion in 2016, to $ 138 billion in 2021. Among them, the OLED display panel will grow from $ 15 billion to $ 41 billion over the same period, forecasting a high annual growth rate of 22%. However, the refraction index, light leakage, bubble generation, adhesion deterioration, peeling phenomenon, moisture resistance, light transmittance, low turbidity. OCA (optically clear adhesive), which solves problems such as improving the resistance of the conductive film, is largely dependent on imported products. In addition, in 2016, the world market is worth KRW4.3 trillion, and the adhesive market has a large market effect. In this study, we tried to analyze the technical competitiveness of patent and thesis by classifying OCA (optically clear adhesive, optical adhesive) for display panel by curing method. As a result of the study, the amount of patents and papers in Korea was found to be superior to other competitors, but the quality level was low. In particular, it was found that the achievements of the papers in the hot melt field are lacking and the government should expand its support.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2771-2782
• /
• 2022

When assessing the radiological consequences of postulated accident scenarios, it is of primary interest to determine the amount of radioactive fission gas accumulated in the fuel rod free volume. The state-of-the-art semi-empirical approach (ANS 5.4-2010) is reviewed and compared with a mechanistic approach to evaluate the release of radioactive fission gases. At the intra-granular level, the diffusion-decay equation is handled by a spectral diffusion algorithm. At the inter-granular level, a mechanistic description of the grain boundary is considered: bubble growth and coalescence are treated as interrelated phenomena, resulting in the grain-boundary venting as the onset for the release from the fuel pellets. The outcome is a kinetic description of the release of radioactive fission gases, of interest when assessing normal and off-normal conditions. We implement the model in SCIANTIX and reproduce the release of short-lived fission gases, during the CONTACT 1 experiments. The results show a satisfactory agreement with the measurement and with the state-of-the-art methodology, demonstrating the model soundness. A second work will follow, providing integral fuel rod analysis by coupling the code SCIANTIX with the thermo-mechanical code TRANSURANUS.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.5
• /
• pp.296-304
• /
• 2023

Cavitation tests for a waterjet propulsor of an amphibious vehicle are carried out in the Large Cavitation Tunnel. Waterjet pump performances and cavitation characteristics including thrust breakdown performances are investigated in the tests. In addition, cavitation characteristics for waterjet propulsors working inside the intake are calculated by using a commercial CFD code, Star-CCM+. Sliding mesh is implemented to a rotating impeller and the k-epsilon turbulence model is chosen. Cavitation bubble growth and collapse are estimated using the Schnerr-Sauer cavitation model based on Rayleigh-Plasset equation. Calculated results agree fairly well with experimental results. The re-design of the waterjet propulsor is performed to enhance waterjet cavitating performances and calculated results show that waterjet thrust breakdown characteristics are significantly improved.

• Journal of Marine Bioscience and Biotechnology
• /
• v.11 no.2
• /
• pp.81-88
• /
• 2019

In this study, effects of nitrogen (N) and phosphorus (P) starvation on the cell growth and fatty acid (FA) production of newly isolated freshwater microalgae were investigated. The microalgae were identified as Chlorella sp. and Parachlorella sp. through 18S rRNA sequencing. Optimal culture temperature and light intensity were investigated using a high-throughput photobioreator, and the result was validated in 0.5 L bubble column photobioreactors using BG-11 without NaNO₃ and/or K₂HPO₄. Under nutrient starvation conditions, total FA contents of the microalgae were significantly changed rather than FA composition. Starvation of both N and P was most effective for increasing FA contents in Parachlorella sp (24.4±0.1%) whereas highest FA contents (42.6±1.8%) was achieved when only P was starved in Chlorella sp. among tested conditions. These results suggest an effective strategy for increasing FA production from microalgae using appropriate nutrient starvation.

• Journal of Plant Biotechnology
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2003

The adventitious root of Panax ginseng C.A. Meyer is regarded as an efficient alternative to cell culture or hairy root culture for biomass production due to its fast growth and stable metabolite production. To determine optimal culture conditions for the bioreactor culture of ginseng roots, experiments have been conducted on physical and chemical factors such as bioreactor type, dissolved oxygen, gas supply, aeration, medium type, macro- and micro-elements, medium supplement during culture period, sucrose concentration, osmotic agents, medium pH and light. Elicitation is a key step to increase ginsenoside accumulation in the adventitious roots but biomass growth is severely inhibited by elicitor treatment. To obtain high ginsenoside content with avoiding biomass decrease, we applied two-stage bioreactor culture system. Ginseng adventitious roots were cultured for 40 days to maximize biomass increase followed by elicitation for 7 days to enhance ginsenoside accumulation. We also experimented on types and concentrations of jasmonate to determine optimal elicitation methods. In this paper, we discussed several factors affecting the root propagation and ginsenoside accumulation. Based on the results obtained from previous experiments we have established large-scale bioreactor system (1 ton-10 ton) for the efficient production of ginseng adventitious roots and bioactive compounds including ginsenoside. Still, experiments are on going in our laboratory to determine other bioactive compounds having effects on diet, high blood pressure, DPPH elimination and increasing memories.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.731-737
• /
• 2024

This study conducted a quantitative research on the artistic perception and acceptance of value among buyers of commodified digital art known as NFT artworks. NFTs, digital assets, have shown rapid growth as investment products, but recently there has been a trend of declining value. However, NFT art, characterized by uniqueness and scarcity, continues to undergo continuous development to create new opportunities and values. Nonetheless, there are also negative opinions regarding NFT art itself as a form of technological art, as well as concerns about copyright disputes and fears of a bubble due to the conversion of physical artworks into NFTs. Predicting the value of artworks targeting specific demographics is difficult, and the value of innovative art such as NFT art, which changes along with the fluctuation of cryptocurrency values, is even more challenging to predict. Therefore, through research on the buyers who play a crucial role in the growth and development of this new form of art, the study aims to contribute to the expansion of NFT art.

• Journal of the HCI Society of Korea
• /
• v.10 no.1
• /
• pp.5-17
• /
• 2015

Nowadays various public data have been serviced to the public. Through the opening of public data, the transparency and effectiveness of public policy developed by governments are increased and users can lead to the growth of industry related to public data. Since end-users of using public data are citizens, it is very important for everyone to figure out the meaning of public data using proper visualization techniques. In this work, to indicate the significance of widespread public data, we consider UN voting record as public data in which many people may be interested. In general, it has high utilization value by diplomatic and educational purposes, and is available in public. If we use proper data mining and visualization algorithms, we can get an insight regarding the voting patterns of UN members. To visualize, it is necessary to measure the voting similarity values among UN members and then a social graph is created by the similarity values. Next, using a graph layout algorithm, the social graph is rendered on the screen. If we use the existing method for visualizing the social graph, it is hard to understand the meaning of the social graph because the graph is usually dense. To improve the weak point of the existing social graph visualization, we propose Friend-Matching, Friend-Rival Matching, and Bubble Heap algorithms in this paper. We also validate that our proposed algorithms can improve the quality of visualizing social graphs displayed by the existing method. Finally, our prototype system has been released in http://datalab.kunsan.ac.kr/politiz/un/. Please, see if it is useful in the aspect of public data utilization.