• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.294-296
• /
• 1995

In this paper, a vector control method for a AC-Excited BLSM(Brushless Synchronous Motor) is proposed. The BLSM has a feature that separate exciter is not needed for excitation. The proposed method is described in two parts as follow, one is the design of drive and the other is a modeling for its implementation. Rotor flux is estimated using indirect sensing method based on voltage equation in the synchronously rotation reference frame. And rotor position is calculated from rotor angular velocity and stator current. Through computer simulation results of this proposed system, it is shown that the BLSM drive has a ability of precision torque control from the static and dynamic performance.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.51-52
• /
• 2016

본 논문은 속도 운전 영역 확장을 위한 자동 진상각 제어 알고리즘을 제안한다. 속도 운전 영역 확장을 위하여 상전류의 위상을 역기전력의 위상에 대하여 진상으로 제어한다. 기존의 진상각 제어 방식은 속도 - 진상각 참조표를 이용하거나 추가적인 하드웨어를 구성하여 제어한다. 참조표를 이용한 제어 방식의 경우 전동기의 특성에 매우 민감하며 운전점이 변경될 경우 제어 특성이 현저히 나빠지는 단점이 있으며, 추가적인 하드웨어를 이용하는 경우 전동기의 제정수에 의존적임과 동시에 제어 시스템의 부피 및 비용 증가와 같은 문제를 야기시킨다. 본 논문은 유효 전압의 크기와 전류 제어기의 궤환 전압을 이용하여 필요한 진상각을 계산한다. 본 논문에서 제안하는 방식의 유용함은 컴퓨터 시뮬레이션을 통하여 타당함을 검증하였다.

• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.953-962
• /
• 2017

Momentum flywheels are widely applied for the generation of small and precise torque for the attitude control and inertial stabilization of satellites and space stations. Due to its inherited system nonlinearity, the tracking performance of the flywheel torque/speed in dynamic/plug braking operations is limited when a conventional controller is employed. To take advantage of the well-separated two-time-scale quantities of a flywheel driving system, the singular perturbation technique is adopted to improve the torque tracking performance. In addition, the composite control law, which combines slow- and fast- dynamic portions, is derived for flywheel driving systems. Furthermore, a novel control strategy for plug braking dynamics, which considers couplings between the Buck converter and the three-phase inverter load, is designed with easy implementation. Finally, experimental results are presented to demonstrate the correctness of the analysis and the superiority of the proposed methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.902-903
• /
• 2014

현재, 해양 레저 스포츠 산업이 발달로 인하여 해양 레저용 보트 산업도 발달해 나가고 있다. 그러나 세계적으로 친환경 기술 개발 관련 정책이 강화되고 있으며, 미국 및 유럽의 경우는 가솔린 엔진으로부터 배출되는 대기 오염 물질에 대한 환경규제를 점점 강화해 나가고 있다. 이러한 원인으로 인하여 친환경 배터리 충전식 전기모터시스템을 도입하고 있으며, 충전식 전기모터시스템에 사용되는 소형 모터 및 충전용 배터리에 대한 수요가 꾸준히 증가하고 있다. 본 논문에서는 배터리 충전식 전기모터시스템에 사용되는 직류 24[V] 환경에서 2.5[HP] 용량의 고출력 고효율의 선외기용 BLDC(Brushless Direct Current) 모터 제어기 및 모터 드라이브, 홀(Hall) 센서를 통한 BLDC 모터의 상태 파악 및 모터의 정/역 제어 및 속도제어에 대한 설계 방법을 제시하고자 한다.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.11-18
• /
• 2019

One of the key objectives of control systems is to maintain a system in a specific stable state. To achieve this goal, a variety of control techniques can be used and it is often uses a feedback control method. As known this kind of control methods requires mathematical model of the system. This article presents seesaw unstable system with two propellers which are controlled without use of a mathematical model instead. The goal was to control it using training data. For system control we use a logistic regression technique which is one of machine learning method. We tested our controller on the real model created in our laboratory and the experimental results show that instability of the seesaw system can be fixed at a given angle using the decision boundary estimated from the classification method. The results show that this control method for structural equilibrium can be used with relatively more accuracy of the decision boundary.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.5
• /
• pp.35-47
• /
• 2011

Dynamic characteristics of a flow control valve, which plays an important role in thrust and O/F control of liquid rocket engines, have been analyzed by the AMESim simulator modeling. The speed control method was proposed for the control of the flow valve equipped with a BLDC motor. The experimental results demonstrated the feasibility of systematical application as well as the performance of the speed control method. Moreover, the speed control method for BLDC motor is much simpler than the P control method in complex flow systems. With the speed control method, the control flow characteristics were evaluated according to plunger shapes. Consequently, same plunger shape proved to be more efficient in the mixture ratio control operated by two flow valves. It was also shown that the appropriate modification of plunger shapes could reduce the mixture ratio perturbation by 0.5%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.10
• /
• pp.911-920
• /
• 2016

For the pitch and yaw axis attitude control of launch vehicle, thrust vector control which changes the direction of thrust during the engine combustion is commonly used. Hydraulic actuation system has been used generally as a drive system for the thrust vector control of launch vehicles with the advantage of power-to-weight ratio. Nowadays, due to the developments of highly efficient electric motor and motor control techniques, it has done a lot of research to adopt electro-mechanical actuator for thrust vector control of small-sized launch vehicles. This paper describes system design and test results of the prototype of direct drive electro-mechanical actuation system which is being developed for the thrust vector control of $3^{rd}$ stage engine of KSVL-II.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.833-838
• /
• 2011

X-ray device used in the diagnosis has made possible to have more effective and accurate diagnosis, powered by the development of various devices. Based on this, X-ray device has become the most basic and essential diagnostic equipment in clinical medicine. At present, in the image acquisition field using X-ray, the use of Digital radiography which is useful in the acquisition time reduction and transfer of images and is possible to have the dose reduction has expanded. With the structure using one detector, this DR device has disadvantages in that it needs structural changes unlike existing X-ray and the detector should be moved to the desired position depending on the shooting location. Therefore, in this study, using BLDC(Brushless direct current) motor and PID(Proportional integral differential) control method, the automatic control system of 3-axis which is upward and downward, left and right and rotation of detector where having the most movement in DR was designed and produced and its performance was evaluated.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.12
• /
• pp.36-45
• /
• 1998

In this paper, a method of on-line PI gain-tuninng is proposed for the speed control of brushless D.C. motor by investigating the pattern of input and output without estimating parameter. Proportional gain is tuned in the process to obtain a fast speed response by supplying the maximum constant input. And integral gain is appropriately tuned in the process of proportional control so that the response may be stably converged and the overshoot may be prevented. Therefore because both control and gain-tuning are executed concurrently, additional works that estimate parameters and so on aren't required in the proposed method. In the proposed method, both fast-response and overshoot problem are well solved, and it is more useful and convenient than existing auto-tuning methods in the speed control of D.C. motor. It is illustrated by simulations and experimental results that the proposed method is useful and stable.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.2
• /
• pp.1-11
• /
• 2001

In this paper, a chattering alleviation VSS controller for the sinusoidal type BLDC motor is designed. Dead Zone function is proposed to change the chattering occurring in the transient state from high frequency to low frequency and time varying gains arc applied for the control input to eliminate the steady state excessive chattering in the conventional ISM. The proposed Dead Zone function represents the sliding layer composed of two switching surfaces and if a state vector exists in this layer, the chattering don't occur. Simulation and experimental results confirm the useful effects of the above algorithm.