• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.368-371
• /
• 1996

This paper describes a study on the developments of the high power brushless DC(BLDC) servo system for electric gun/turret drive system. The servo control unit including the DSP based digital servo unit, power amplifier, signal conditioning circuit, internal power circuit is designed and implemented for driving the 10hp BLDC servo system. The developed system is applied to the gun/turret drive & stabilization simulator system and the control performance is verfied through the experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.332-336
• /
• 1998

Recently, the BLDC(Brushless DC) motor has been increasingly applied to home appliance and the study of BLDC motor drive is extensively processing, so it is necessary to investigate the characteristic of the BLDC motor drive. In this paper, we proposed the modeling of interior permanent - magnet BLDC motor drive. The state model of motor and the model of inverter using pulse width modulation are included. The modeling is verified by the experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.3-5
• /
• 2002

In this paper, we discuss an in-wheel motor for low-speed high-torque light transportation application. We present the design and fabrication results of an exterior type, brushless DC motor, and report the experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.60-62
• /
• 2001

In this paper, a CAE system, $MotorPro^{(TM)}$, is presented for motor design. It is composed of equivalent magnetic circuit method and finite element method. It provides fully automated finite element method that takes only a few seconds to a few minutes. Using this system. 18kw brushless DC motor is dealt as design example.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 하계학술발표대회 논문집
• /
• pp.79-79
• /
• 2007

• 한국전자통신학회논문지
• /
• 제11권6호
• /
• pp.597-604
• /
• 2016

본 논문에서는 미용 목적의 핸드피스에 사용가능한 BLDC 모터의 속도 제어 시스템을 구현한다. 저비용 개발을 위해 모터 내부의 홀 센서 값을 속도 제어에 이용하였다. 모터 전원 회로와 드라이버 회로는 가정용 220V 전원을 입력으로 사용하도록 설계하였으며 별도의 다른 전원은 필요로 하지 않는다. 핸드피스 작업 시 발생하는 부하 변동에 따른 급속한 속도 증가를 방지하기 위해 별도의 과속 방지 제어기를 탑재하였다. 개발된 제어 시스템은 5,000~30,000 RPM 구간에서 운용 가능하다. 본 연구에서 개발된 핸드피스 모듈에서 부하 변동이 있음에도 불구하고 모터의 속도가 일정하게 유지됨을 실험으로 입증한다.

• 한국정보전자통신기술학회논문지
• /
• 제11권3호
• /
• pp.295-300
• /
• 2018

기존에 BLDC모터의 속도 제어 알고리즘으로는 PI 제어 알고리즘이 많이 사용되어왔다. PI 제어 알고리즘의 경우 다양한 속도 변화에 대한 속도와 토크의 응답 특성이 느려, 정상상태에 도달하는 것이 느리다는 단점이 있다. 따라서 본 논문에서는 오버슈트가 조금 있지만 응답 속도를 개선해 정상상태에 빠르게 도달할 수 있는 PWM 퍼지 논리 제어 알고리즘을 제안하였다. PWM으로 응답속도를 줄이고, 퍼지 논리 제어 알고리즘으로 오버슈트를 최소화하였다. 제안된 PWM 퍼지 논리 제어 알고리즘은 DC 초퍼, PWM 듀티 사이클 조정기, 퍼지 논리 제어기 등으로 구성했다. 제안된 알고리즘의 성능과 타당성은 Matlab 2018a의 Simulink를 이용한 시뮬레이션을 통해 입증하였다.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.96-103
• /
• 1998

With the advance of processing technology , so as to spare fuel, piston heads used in automobile reciprocating engine have complex 3-dimension, with respect to shape such as ovality, profile, eccentricity, offset, recess. Therefore, coming out of the existing process work used master cam. the process work is performed using a CNC lathe. For a precision processing, the processing work is need to make study of high speed feed gear synchronized with the rotative speed of main spindle. And then the high speed feeding system must maintain high dynamic stiffness, high speed and high positioning accuracy . In this paper, in order to achieve high speed cutting tool feeding. The linear brushless DC motor is used for satisfying this process work. The ball bush and turicite is used as the guidance of the feed gear system. Also linear encoders, digital servo amplifiers and controller are used for controlling driving motor. This paper presents the design and simulation of the new tool feed system for noncircular machining.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1661-1667
• /
• 2013

This paper studies the dynamic irreversible demagnetization characteristics of an interior permanent magnet (PM) brushless DC motor with a stator turn fault. A new algorithm, which is a finite element method (FEM) combined with a line voltage equation of the motor, is developed to analyze irreversible demagnetization under dynamic and transient states and considers a stator turn fault. The input current, circulating current, magnetic distribution characteristics, and operating property of the PM, including the irreversible demagnetization in the fault state, are analyzed using this algorithm by considering the magnetic saturation effect. The feasibility of the proposed method confirmed from the analysis results is verified via an experiment. Through this fault analysis, we can accurately check the fault phenomena of a PM motor against the demagnetization fault for fault prevention.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권8호
• /
• pp.451-458
• /
• 2000

The precise speed and position control technique for Brushless DC Motor demands accurate position and speed feedback information. Generally, resolver or absolute encoders are used as speed and positiion sensor. But they increase cost and more problem happens at low speed than high speed specially. Therefore, in this paper, optimal speed observer is proposed for decreasing size and cost of whole system. And also, we consider the error problem about the system modeling and measurement at low speed range as well as high speed. The overall system consists of two parts, a drive and a speed observer. We make use of Least square curve fitting algorithm as speed observer and can overcome low resolution by proposed observer. Also, because of using the signal of hall sensor, robust control is possible in low speed as well as high speed for the change of the parameters of the system and disturbance. To construct observer using the signal of hall sensor, we design the pulse multiplier circuit and the software of microprocessor, AT89CC2051. Finally, the performance of the proposed observer is exemplified by some simulations and experiments.