• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.31-36
• /
• 1999

In this paper, a novel indirect rotor position sensing method is proposed to improve the performance of sensorless drive of brushless DC motors. Fast mode change to the sensorless operation is difficult in the existing indirect rotor position sensing methods because precise rotor position can not be obtained when an excessive input is applied to the drive during synchronous operation mode. To cope with this problem, the relationship between terminal voltage and back-emf waveform is analyzed in this paper, also a novel indirect position sensing method which can detect a precise rotor position at low speed range is proposed. The effectiveness of the proposed method is verified through the experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.3
• /
• pp.232-238
• /
• 2015

A sensorless control algorithm of brushless DC (BLDC) motors with a model current based on 120 degree conduction mode is proposed in this paper. The rotor speed and position can be estimated using the current model of BLDC motor, which is a modified version of the conventional current model of permanent magnet synchronous motor. The rotor speed and position can be obtained using the difference of the actual current and the model current. The position error caused by the parameter errors of the model current is compensated using a PI controller and the feedback loop of the real current. The validity of the proposed sensorless control algorithm is verified through simulation.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.12
• /
• pp.709-717
• /
• 2004

Flux-reversal machine (FRM) is a new brushless doubly salient permanent magnet machine. Its operation is similar to that of the brushless DC motor, so it can be driven by 120 degree square wave voltage and use PWM pulse patterns in two-phase feeding scheme to control the speed. In this driving method, the back electromotive force (BEMF) current in the open phase is generated by the BEMF. It can be appeared or disappeared according to the changes of the neutral voltage of the machine. In this paper, the time-stepped voltage source finite-element method taking BEMF current into account is proposed. Its influences on the performances of the FRM are also investigated. To prove the propriety of the proposed analysis method, a Digital Signal Processor (DSP) installed experimental devices are equipped and the experiment is performed.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.1
• /
• pp.58-66
• /
• 1998

A continuous, accurate, and robust variable structure tracking controller(CVSTC) is designed for brushless direct drive servo motors(BLDDSM). Although conventional variable structure controls can give the desired tracking performances, there exists an inevitable chattering problems in control input which is undesirable for direct drive systems. With the presented algorithm, not only the chattering problems are removed by using the efficient compensation of the disturbance observer, but also the prescribed tracking trajectory can be obtained using the sliding dynamics when an initial of the desired trajcetory is different from that of a BLDDSM. The design of the sliding mode tracking controller for the prescribed, accurate, and robust tracking performance without the chattering problem is given based on the results of the detailed stability analysis. The usefulness of the suggested algorithm is demonstrated through the computer simulation for a BLDDSM under load variations.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.573-575
• /
• 1999

Brushless DC motor which has the characteristics of high efficiency and high torque, can be controlled speed by the encoder or resolver. But these sensors cost highly and have the problem that they increases the size. This paper proposes a speed control by Hall-Sensor. which is small and cheap. But this sensor has a problem of low resolution. To solve the problem this paper proposes speed control by using a least square algorithm.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2534-2536
• /
• 1999

This paper suggested a new sensorless driving strategy for brushless de motor which can improve the conventional degradation of highspeed operating performances, lowspeed operating performances and starting performances caused by applying general single pwm switching frequency. By varying PWM switching frequency during operating time, the proposed method can get some desired upper performances. For confirming the validity of the proposed method, the sensorless driving system is implemented with an rPM module and 87c196MC micro controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.706-710
• /
• 1988

Using back electro-motive force(EMF) signals of a brushless DC motor, the sensorless micro-processor controlled drive system was developed. In this new commutation method, the manual pulses are used for relatively short accelerating phase and then the exact commutational positions are detected based upon the back emf signals. The hardware and software implementations with the experiment to compare the performance of the developed system with the, conventional system using hall effect sensors are included. By reducing the number of the required sensors in the artificial heart control system, the total reliability will be incresed.

• Journal of Mechanical Science and Technology
• /
• v.15 no.7
• /
• pp.831-838
• /
• 2001

Torque ripple control of brushless DC motor has long been the main issue of the servo drive systems in which the speed fluctuation, vibration and acoustic noise need to be minimized. The vast majority of the methods for suppressing the torque ripple require the Fourier series analysis and either the iterative or least mean square minimization. In this paper, a novel approach based on the d-q-0 reference frame that achieves ripple-free torque control with maximum efficiency is presented. The proposed method optimizes the reference phase current waveforms including even the case of 3-phase unbalanced condition, and the motor winding currents are controlled to track the optimized current waveforms by the delta modulation technique. As a results, the proposed approach provides a simple and yet effectine means for obtaining the optimal motor excitation currents. The validity and applicability of the proposed control scheme are verified through simulations and experimental investigations.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.1
• /
• pp.83-90
• /
• 2013

This paper describes advanced brushless DC motor drive without position sensor for home appliances with compressor to reduce the pulsating currents and vibration. The proposed method limits the motor currents during starting period and reduces commutation torque ripple during sensorless operating period. Experimental results show that the proposed method implemented in an inverter for a BLDC motor driven compressor considerably reduces not only the pulsating currents but also vibration of the home appliances.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.1
• /
• pp.91-96
• /
• 2013

Recently, it is increased to apply sensorless drive for BLDC (Brushless DC) motor to household electrical appliances, especially in the refrigerators and air conditioners, to reduce the cost and the acoustic noise by the operation and to make their functions more comfortable for human beings. In this paper, low-cost sensorless drive for BLDC motor is implemented by random PWM (Pulse Width Modulation). The experimental results show that the electromagnetic noise was reduced and the sound quality was improved by BLDC motor sensorless random PWM Control.