• 한국지능시스템학회:학술대회논문집
• /
• 한국지능시스템학회 2007년도 추계학술대회 학술발표 논문집
• /
• pp.205-209
• /
• 2007

생산 현장에서 기기의 운영과 관리는 제품의 품질 및 기업의 수익성과 직결된다. 그러나 정상적인 작동을 하고 있는 시스템에서 고장의 시점과 고장의 종류를 예측하기 곤란하며 따라서 잔여 가동 시간이 얼마인지도 예측하기 힘들다. 본 논문에서는 산업용 기계, 공정과 의료기기 등 신뢰성이 요구되는 Brushless DC 모터의 상태 변화의 추이를 관찰하여 진단의 특징점으로 사용한다. 본 논문에서 제안한 상태천이 모텔은 고장의 시점과 고장의 종류를 예측할 수 있으며 유지보수의사결정에 도움을 줄 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.203-206
• /
• 1998

This paper describes the procedure of getting information about auto-tuning of PID regulator by the injection of high step input, called limited input, during a transient time of control. The key point is that system identification and control could be continuously executed. This means that the system information obtained by limited input despite of system uncertainty can be continuously applied to the PI regulator. Simulation and experiment result of brushless DC motor system having monotone increasing step response demonstrate the usefulness of proposed auto-tuning algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.438-441
• /
• 1989

In this paper the phase advance method is adopted for torque characteristics improvement of brushless D.C motor and the effect on motor characteristics is investigated. The optimal commutation position is calculated by computer simulation. This paper also implements a driver for brushless D.C motors using single-chip microprocessor, 8751.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권1호
• /
• pp.20-23
• /
• 2004

BLDCMs are widely used in many industries. In certain specialized areas, they need to have high efficiency, high power rate and produce a low volume of noise, etc. In this study, a new type of slotless BLDCM is proposed that has no cogging torque, low iron loss and low volume as compared to commonly used BLDCMs. With a high performance magnet and coreless compact winding structure similar to those employed in linear synchronous motors, motor volume is reduced. The proposed motor has been put been through various experiments arid has demonstrated acceptable results for industry applications.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.488-492
• /
• 1998

Indirect sensing of the rotor position of permanent magnet brushless DC motors contains position error. Such measuring error can be attenuated by adopting Kalman filter. In this paper, the cause of measuring error is analyzed and the design technique of Kalman filter is described. Experimental results show that the proposed sensorless drive exerts superior performances.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.52-55
• /
• 2002

This paper proposes the optimum design of a Brushless DC(BLDC) motor using Genetic algorithm and SUMT. The efficiency is chosen as the object function.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.49-52
• /
• 1987

In this work, the characteristics of a six step inverter fed brushless DC motor are analyzed and the control of amplitude of inverter input voltage and phase shift of a six step inverter is discussed. The effects of the motor performance, efficiency and power factor, are studied.

• 대한전기학회논문지
• /
• 제37권6호
• /
• pp.361-367
• /
• 1988

In this study new design method with auxiliary slot on salient pole is proposed for the reduction of cogging torque which is the problem of corm type DC Brushless motor. And FEM(Finite element method) is adapted in trial motor which is designed by the method proposed in this paper. and learn the quantative characteristics of cogging torque. Comparing results of analysis with measurement it is porved that the proposed design has a propriety.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2399-2401
• /
• 2001

This Paper presents a positioning control method of the LBLDCM(Linear Brushless DC Motor) under friction. The friction may cause steady state position error. So it is necessary to consider friction effect for precision positioning control. The proposed control method uses disturbance observer algorithm and friction compensation. The experimental results of the proposed control method based on the disturbance observer are presented to show its effectiveness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.891-893
• /
• 2003

This paper Presents the optimum design of Brushless DC Motor using multi-objective function Neural Network to maximize efficiency and Ratio of Torque Per unit weight.