• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.7
• /
• pp.491-500
• /
• 2004

This paper considers a hybrid PWM(pulse width modulation) method which can be used in the brushless DC motor controller. Due to many disadvantages of bipolar PWM method, unipolar PWM method is mostly used in industrial field. In constant speed control application, the unipolar PWM method shows the good performance of speed control. But in the wide range of speed control application, it shows poor performance especially when deceleration is needed. So we propose the hybrid PWM method that utilizes both of bipolar and unipolar PWM methods according to the sign of the speed controller output. Simulation and experimental result show that the proposed method improves speed control performance of the brushless DC motor which is applied to the industrial sewing machines.

• Journal of Magnetics
• /
• v.15 no.1
• /
• pp.40-44
• /
• 2010

This paper introduces two types of magnetization, and reports the effect of the magnetization direction on the iron loss in a brushless DC (BLDC) motor using a 2-D time-stepped voltage source finite-element method (FEM). The iron losses were found to consist of hysteresis and eddy current loss, which were calculated from the time variation of the magnetic field distribution. To confirm the analysis, a prototype BLDC motor was constructed with a sintered ferrite magnet. The analysis and experimental results suggest that the magnetization direction has a significant effect in terms of the iron loss characteristics of the BLDC motor.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.6
• /
• pp.278-286
• /
• 2005

Recently, high-speed centrifugal turbo-compressors have been under intensive research and development. Since, compared to conventional compressors, high-speed centrifugal compressors hive numerous qualities such as simple structure, light weight small size, and high efficiency, etc. In cope with such industrial demands, a high-speed brushless DC motor for a 50-kW, 70-krpm turbo-compressor was developed based on a 2-D analytical method, of which design was verified using the FE analysis. A prototype machine was also fabricated and tested to confirm the analytical design. Preliminarily obtained experimental data using the prototype mac]line shows the validity of the analytical approach.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.171-173
• /
• 1997

This paper presents analysis of the radial force density in brushless DC motor of which distribution is not uniform in the axial direction. The analysis considering 3D shape of teeth and overhang is not only important but essential to calculate the radial force density that acts on the teeth of stator, because it is frequent source of vibration and changes at the end of teeth. For the analysis, a new 3D equivalent magnetic circuit network method taking into account movement of the rotor without remesh is proposed. The radial force density is calculated by Maxwell stress tensor and analyzed by discrete Fourier transform.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.1
• /
• pp.54-60
• /
• 2014

This paper shows a calculation method of several types of loss and the efficiency of brushless DC motors coupled with a load system by using a simple equivalent circuit, in which copper loss, eddy current loss, hysteresis loss, friction loss, viscous loss, and inverter loss are taken into account. We clarify each loss and motor efficiency at different motor speeds and different output torques by using the Microsoft-Excel. Moreover, the calculated results are in good agreement with the measured ones.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.379-381
• /
• 1999

This paper presents a study of the performance of a brushless DC motor (BLDCM) speed control system. Recently, most motor controls are implemented in digital electronics. Digital controllers tend to be more accurate, less susceptible to noise and more flexible in terms of programming. The system used a digital PI controller in order to implement the constant speed of Brushless DC motor. Microprocessor used in this experiment is 80c196kc. The applied motor has been constructed using a 50W, 150V, 3000rpm, four-pole motor.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.200-204
• /
• 1998

In this paper, a mathematical model of Brushless DC machine fed by pwm inverter is developed. Dynamic and steady state characteristics of Brushless DC motor is simulated and analyzed: electromagnetic torque, speed, phase voltage, and current. In mathematical modeling, the shaft transformation referencing rotor frame from to "a,b,c" three phase frame to "d,g" two phase frame is described.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.675-677
• /
• 2000

In the paper the eddy current loss in brushless DC motor due to switching frequency supplied by PWM inverter, is analyzed. The compensated conductivity is used in order to analyze the eddy current loss in brushless DC motor which has lamination structure. The eddy current loss is deceased when switching frequency supplied by PWM inverter is gradually increased from 1.2kHz up to 12kHz. The high switching frequency of PWM inverter make the output wave into a similar sine wave and this leads to the decreasing eddy current loss.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.143-146
• /
• 2001

Servomotors, especially linear brushless servomotors have numerous advantages over ball screws, timing belts, rack/pinion drives and friction drives compared wi th rotary servomotors This paper proposes an linear regression method as the estimated ion of unknown parameters from the linear brushless DC motor The estimated parameters are used to tune the gain of controller. In order to agree with this purpose, Digital Signal Processor (TMS320F240), developed for implementation of the motor control, is adopted in this study. The processor playing an important role in controller has A/D converters, PWM generators, riched I/O ports internally.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1085-1087
• /
• 2004

The space harmonic analysis, as an analytical method, is used to estimate the flux distribution in the air gap of the brushless motors in this paper. With the flux distribution, back-emf and torque characteristics can be estimated.[1-7] Therefore, the air gap flux distribution of surface type permanent magnet motor according to the motor specifications are studied to estimate the torque characteristics in this paper. To validate the analysis result of this method, 2-dimensional finite element analysis is performed and the air gap flux density is compared to that from space harmonic analysis.