• Journal of the Korean Chemical Society
• /
• v.16 no.4
• /
• pp.201-204
• /
• 1972

The critical micelle concentrations of decylpyridinium chloride in aqueous solutions have been determined by the electrical conductance measurements in the range of $10^{\circ}C$-$50^{\circ}C$. The temperature variation of the critical micelle concentrations has shown the minimum at the vicinity of $15^{\circ}C$. The Clausius-Clapeyron type equation of log (c.m.c.) versus temperature has been established. The values ${\Delta}Hm$ and the other thermodynamic properties associated with micelle formation have been determined using the above equation and compared with that of dodecylpyridinium chloride and dodecylpyridinium bromide.

• Journal of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.612-616
• /
• 1991

Metachromatic behavior of methylene blue (MB) in solutions of aqueous sodium dodecyl sulfate (SDS), chondroitin sulfate and L-${\alpha}$-lecithin vesicle at $18~52^{\circ}$C has been studied by absorption spectroscopy. MB was clustered in the matrix of the vesicle with high concentration of L-${\alpha}$-lecithin. The metachromasy of MB was found to be independent of phase transition temperature of vesicles. These results suggest that the dyes were aggregated on the hydrophilic surfaces of vesicle. In the vesicular system, the metachromatic effect of MB was dramatically decreased in the presence of hexadecyltrimethylammonium bromide (CTAB) than SDS. It is estimated that the intercalation site of these surfactants on vesicle surfaces was different, that is, the intercalation of CTAB was more effective than that of SDS.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.7
• /
• pp.642-648
• /
• 2000

Falling film heat transfer analyses with aqueous lithium bromide solution were peformed to investigate the transfer characteristics of the copper tubes. Finned(knurled) tube and a smooth tube were selected as test specimens. Averaged generation fluxes of water and the heat transfer performances(heat flux, heat transfer coefficient) were obtained. The results of this work were compared with the data reported previously. As the film flow rate of the solution increased, the generation fluxes of water decreased for both tubes. The reason is estimated by the fact that the heat transfer resistance with the film thickness increased as the film flow rate increased. The effect of the enlarged surface area at the knurled tube was supposed to be dominant at a small flow rate. The generation fluxes of water increased with the increasing degree of tube wall superheat. Nucleate boiling is supposed to occur at a wall superheat of 20 K for a smooth tube, and at 10 K for a knurled tube. The heat transfer performance of the falling film was superior to pool boiling at a low wall superheat below 10 K for both tubes tested. The knurled tube geometry showed good performance than the smooth tube, and the increased performance was mainly came from the effect of the increased heating surface area.

• Journal of Korean Society on Water Environment
• /
• v.22 no.6
• /
• pp.1137-1143
• /
• 2006

In this study we investigated the removal characteristics of NOM and bromate formation characteristics in SOMT reactor. The system was recently developed as a novel ozone reactor and installed in SJ pilot plant. DOC values were decreased within 3% after treatment of 0.5~2.0 mg/L ozone dosage in SOMT reactor while the $UV_{254}$ value was 69% decreased at 2.0 mg/L ozone dosage. The composition of NOM was analysed by LC-OCD (Organic Cabon Detector) after ozone treatment in SOMT reactor to elucidate the variation of NOM character. Polysaccharide (more than 20,000 g/mol) fraction of NOM was decomposed while building blocks (350~500 g/mol) and neutral (less than 350 g/mol) fraction increased. Spiked bromide reacted with 0.5~2.0 mg/L ozone dosage in the SOMT reactor. The bromate formation was proportional to the ozone dosage ($R^2=0.978$) but not proportional to reaction time. The maximum concentration of formated bromate was not exceeded to 10% of spiked bromide concentration.

• Carbon letters
• /
• v.13 no.4
• /
• pp.212-220
• /
• 2012

Orange peel (OP) exhibits a sorption capacity towards anionic dyes such as reactive blue 19 (RB19). Cetyltrimethylammonium bromide (CTAB) as a cationic surfactant was used to modify the surface nature of OP to enhance its adsorption capacity for anionic dyes from an aqueous solution. Four adsorbents were investigated: the OP, sodium hydroxide-treated OP (SOP), CTAB-modified OP and CTAB-modified SOP. The physical and chemical properties of these sorbents were determined using nitrogen adsorption at 77 K and by scanning electron microscope and Fourier transform infrared spectroscopy techniques. The adsorption of the RB19 dye was assessed with these sorbents at different solution pH levels and temperatures. The effect of the contact time was considered to determine the order and rate constants of the adsorption process. The adsorption data were analyzed considering the Freundlich, Langmuir, Elovich and Tempkin models. The adsorption of RB19 by the assessed sorbents is of the chemisorption type following pseudo-first-order kinetics. CTAB modification brought about a significant increase in RB19 adsorption, which was ascribed to the grafting of the sorbent with a cationic surfactant.

• Journal of the Korean Applied Science and Technology
• /
• v.11 no.2
• /
• pp.139-146
• /
• 1994

MDABM and MDAEW, as a accelerating weight loss agents, were prepared by adding water to myristyldimethylbenzylammonium bromide(MDAB) and myristyldimethylethylammonium ethyl sulfate (MDAE) synthesized. As a result of weight loss finishing of the MDABW and MDAEW with NaOH on PET fiber, the ratio of weight loss of MDABW was very larger than that of MDAEW. This result showed that quaternary ammonium bromide had higher weight loss effect than quaternary ammonium sulfate, and the ratio of weight loss was greatly varied with the kind of quaternary ammonium salts used. In these conditions, proper treatment concentration, treatment time, and treatment bath ratio were about 8g/l, $6O{\sim}90min$, and $40:1{\sim}50:1$, respectively.

• Journal of the Korean Chemical Society
• /
• v.18 no.6
• /
• pp.437-442
• /
• 1974

Pentacyclo ($5,3,0,0^{2,5},06{3,9},0^{4,8})-decane-6,10-dione was synthesized from the cyclopentanone in good overall yield(60%). Cyclopentanone ethylene ketal(Ⅰ) was brominated with pyridinium bromide perbromide, and the brominated ketal(Ⅱ) was converted to the dimer of cyclopentadienone ethylene ketal(Ⅲ). The ethylene ketal(Ⅲ) was again converted to the dicyclopentadiene-1,8-dione(Ⅳ). Finally, the pentacyclo ($5,3,0,0^{2,5},06{3,9},0^{4,8})-decane-6,10-dione(Ⅴ) was synthesized from the dicyclopentadilene-1,8-dione(Ⅳ) by photochemical cyclization.

• Macromolecular Research
• /
• v.8 no.3
• /
• pp.131-136
• /
• 2000

The synthesis of poly(2-ethynylpyridine) having glycidyl functionality was performed by the direct polymerization of 2-ethynylpyridine and epibromohydrin under mild reaction conditions without any initiator and catalysts. The polymerization proceeded well to give the resulting poly(2-ethynylpyridinium bromide) with a glycidyl functionality having relativity high molecular weight in high yields. The polymer structure was characterized by various instrumental methods to have the conjugated polymer backbone structure having glycidyl functionality. This ionic polymer was completely soluble in water, methanol, DMF, DMSO, and N,N-dimethylacetamide, but insoluble in THF, toluene, acetone, nitrobenzene, and n-hexane. This polymer system exhibited the UV-visible absorption around 300 and 520 nm and red photoluminescence spectrum around 725 nm.

• Journal of Biomedical Engineering Research
• /
• v.9 no.1
• /
• pp.47-60
• /
• 1988

N-n-Propylacrylamide has been synthesized from acrylamide and n-propyl bromide. N -n Propylacrylamide was copolymerized with acrylamide at $60^{\circ}C$ in tetrahydrofuran using ${\alpha},{\alpha}'$-azobisisbutyronitrile as initiator. The synthesized monomer and copolymers have been identified by NMR and FT-lR spectrophotometer. The swelling properties of the crosslinked homopolymers were investigated at different temperatures. Three types of hydration layer around the back-bone structure of gels were determined. The thermal properties of copolymers were also measured by differential scanning calorimeter and thermogravimetry. As the amounts of N-n-propylacrylamide are increased, the enthalpic changes associated with endothermic transition and glass transition of the copolymers are decreased. As the amount of N-n-propylacrylamide is increased, the thermal stability is increased. The activation energies of thermal decomposition and dehydration for the poly (acrylamide-co-N -n-propylacrylamide) have been evaluated by Freeman and Carroll's method. As the amounts of N-n- propylacrylamide are increased, the activation energies of thermal decomposition and dehydration are increased.

• The Korean Journal of Pesticide Science
• /
• v.8 no.4
• /
• pp.272-279
• /
• 2004

The process for the preparation of fungicide propineb starting with 1,2-diaminopropane was studied on the optimal condition base. Side reaction producing toxic material 1,2-propylenethiourea could be ieduced effectively by using phase transfer catalyst and the product was noticed to show a great improvement in yield and purity. Especially when the phase transfer catalyst tetraphenylphosphonium bromide is used, the yield and the purity of the product were found to be best with up to 95 and 96% respectively and the byproduct content was shown within 1.7%. Also, the contents of wetting agent AES and dispersing agent APS were optimally chosen $3.1\sim4.0%$ and $4.0%\sim5.0%$ respectively for the improvement of suspensibility and wettability of Propineb WP.