• Journal of Digital Contents Society
• /
• v.11 no.3
• /
• pp.291-298
• /
• 2010

Although searching service is popularized in the PC-based internet environment, it is not (or rarely) supported on TV, which is the major multimedia equipment in the living room. Several trials are made to port established PC-based searching systems onto TV-set but failed to get popularity among viewers as they did not consider the viewers' modality. Operating the searching system should not disturb viewers in watching TV (for example, TV screen should not be (even partially) covered by the searching system's graphics) and the number of pushing the remote controller's buttons should be minimized so that viewers can keep watching TV without glancing at the searching system's graphics. In this paper, the author introduces a new searching system running on TV-set, which is designed to reflect properly the viewers' modality. The searching system is also compatible with the data service standard adopted by the domestic broadcasting networks so that it can be easily implemented by them.

• Journal of KIISE:Software and Applications
• /
• v.26 no.9
• /
• pp.1085-1094
• /
• 1999

이동 분산 환경에서는 무선 데이타 전송 기법을 통하여 사용자들에게 다양한 정보들을 전달하게 된다. 본 논문은 균등 무선 데이타 방송 환경에서, 빠른 시간에 방송데이타를 접근할 수 있는 방법에 대하여 기술한다. 이를 위하여 무선 방송 데이타의 스케쥴링 문제를 정의하고, 어떤 질의가 접근하는 데이타들의 응집 정도를 나타내는 `질의 거리(Query Distance: QD)'라는 측정 기준을 제시한다. 제안한 질의 거리를 사용하여 각 질의의 우선 순위에 따라 해당 질의가 접근하는 데이타 집합을 방송 스케쥴에 추가하면서 스케쥴을 구성하는 데이타 스케쥴링 기법을 제시한다. 데이타 집합의 스케쥴 구성 과정에서 우선 순위가 높은 질의의 질의 거리를 최소화하면서 낮은 우선 순위 질의들의 질의 거리를 줄이는 스케쥴 확장 규칙들을 사용한다. 예를 이용하여 제안하는 방법에 대하여 설명한 후, 실험을 통해 제안한 방법의 성능을 평가한다.Abstract In mobile distributed systems the data on the air can be accessed by a lot of clients. This paper describes the way clients access the broadcast data in short latency in uniform wireless broadcasting environment. We define the problem of wireless data scheduling and propose a measure, named Query Distance(QD), which represents the coherence degree of data set accessed by a query. By using the measure, we give a data scheduling method that constructs the broadcast schedule by appending each query's data set in greedy way. When constructing the schedule, we use schedule expansion rules that reduce the QD's of lower-frequency queries while minimizing the QD's of the higher-frequency ones. With the use of examples we illustrate the mechanism of the proposed method and we test the performance of our method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.3 s.303
• /
• pp.31-40
• /
• 2005

In this paper, we develop an approach toward JSC(Joint Source-Channel Coding) method for MPEG-4 based FGS(Fine Granular Scalability) video coding and transmission in fixed and mobile receiving environment(Digital Audio Broadcasting, DAB). The source coder used MPEG-4 FGS video codec, the channel coder used RCPC(Rate Compatible Punctured Convolution) code and the modulation method used QPSK modulation. We have considered channel environment of AWGN and mobile receiving environment. This study determined optimum Trade-off point between source bit rate and channel coding rate in variable channel states. We compared FGS-JSC method and general single layer CBR(Constant Bit Rate) transmission. In this results, FGS-JSC was appeared better performance than CBR transmission.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.115-120
• /
• 2014

Many product line engineering methods use the feature model to structure commonality and variability among products in terms of features and to derive a product feature configuration, which is the set of features required for the development of a product. Features to be selected during product derivation are mainly determined based on the quality attributes required for a product. Most methods published so far derived an optimal product feature configuration through linear co-relationship between features and quality attributes. However, the co-relationship between features and quality attributes can be formulated as a non-linear function because of feature interactions. This paper proposes a method that derives an optimal product feature configuration considering feature interactions. Four product line cases are used to validate the proposed methods.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.173-183
• /
• 2018

It is a very difficult task to establish a collaborative procedure in a new business that requires multilateral collaboration or to revise the regulation by analyzing and proving objectively the problems in the collaborative process conducted already by multilateral collaboration. In this paper, we proposed an optimization model for collaborative process to establish the operation procedure between collaborative parties using PERT/CPM network diagram which allows us to calculate the processing time. In order to verify the effectiveness and usefulness of our model for the collaboration process optimization developed in this study, we applied the developed collaborative procedure to student selection of the work-and-study-in-parallel course associated with a degree executed by Ministry of Employment and Labor. This study can be useful not only for newly establishing or reconfiguring collaborative procedures but also for standardizing the business procedures for building information systems between collaborative organizations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.283-288
• /
• 2018

In this paper, it is required that the next generation wireless transmission system can support a large number of users without distortion of transmission signal with high data rate in various different propagation environment while using limited resources as efficiently as possible, and therefore an efficient transmission system is continuously required. Because of the large amount of data to be handled in a limited frequency band, a very complex digital modulation scheme is adopted. the linearity of the power amplifier determines the linearity of the entire communication system, and thus a linear amplifier is required. In cognitive radion systems, there is a power control issue in the relationship between primary and secondary users. This problem is solved by simulating the communication system so as to select the cognitive radio power while power control while overcoming linearity by using feed-forward PA.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.91-97
• /
• 2012

Recently, the performances of electrical and electronic devices are improving while the sizes are becoming smaller. As sound-generating systems, the two-dimensional speakers have been developed in place of conventional three-dimensional ones. Piezoelectric materials show the mechanical vibrations due to the voltage applied from outside the materials. The early film speakers had a limitations of output power in that it was not easy to make the conducting macromolecular films on the surfaces of the materials due to the internal chemical properties of materials. We have adopted the corona surface treatment in order to improve the output characteristics by increasing the adhesion of the coating material on to the surface of the center material of piezo film. The results showed the improvement of output power in the wider range of operating frequencies.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.161-166
• /
• 2012

In this paper, we constructed the systematic management and standardization of computerized landfill bringing system in Ansung landfill facility. During the system design process and database construction, we considered the specific items in Ansung landfill facility. And, we systemized and conventionalized the basic core data so as to we apply to another landfill facilities. And, we tried to standardize the system using the exception logic for specific items. For this purpose, we developed the landfill bringing management system which can help to manage a landfill efficiently. Basically We made efforts to standardize it's system architecture but also we considered it's localization to adapt An-sung Landfill's special requirements. We used RFID and LPR systems to distinguish a garbage truck from the others, and could establish more reliable landfill management system with this information. We expect that we can perform the systematic and the efficient landfill Bringing using the automated process of bringing in and taking out the waste process based on the developed system by automated RFID/LPR system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.75-80
• /
• 2014

Transportation culture is an inseparable part of a group's overall culture. Since the term "transportation" is directly related to vehicular movement, I would like to propose the more general term: transportation culture and use that in the following paragraphs. Transportation culture is on one hand expressed by the consumers of transportation services reflecting their overall social culture and on the other hand taken into account by transportation professionals. Ministry of Land and Transportation conducted the Transportation Culture Index, a nationally representative survey, to assess a few key indicators of the degree to which ttransportation culture is valued and is being pursued every year. In this study, recommendation for TCI are explained based on theoretical framework and changing environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.27-32
• /
• 2016

In general, IoT(Internet of things) designate the intelligence technologies and services which interact all necessity information between human and things, things and thing and things and systems with all things connecting through the internet based. The smart home in present of IoT environment fuses the daily supplies/equipment which needs to use for the private life with the internet of things that is the fruit of the converged business through all most private consumption related in vastly. The concept of smart home has been built around early 2000s due to the spread of high speed internet and advanced of smart electronics and internet, furthermore influencing by the enhancement of wireless network and smart devices, it is advanced as a smart home within the internet of things environment. Smart home service inside the house which most closely implemented with personal life is being developed and advanced in various forms. These developments may exert a positive effect, but if it does not resolve the security issues for the smart home service, then it may cause a big plague of privacy and personal life.