• Journal of information and communication convergence engineering
• /
• 제8권3호
• /
• pp.258-262
• /
• 2010

This paper represents design broadband impedance matching circuit for Coupler to improve power transfer efficiency in the broadband power line communication(BPLC) systems. The Butterworth gain function equalizer is used to design broadband matching circuit. A practical PLC Coupler impedance matching circuit is designed, and the characteristics for S11 and S21 of PLC Coupler are enhanced comparing with unmatched one. This is done by maximizing the power transfer gain from modem to the load.

• Journal of information and communication convergence engineering
• /
• 제7권2호
• /
• pp.113-118
• /
• 2009

This paper is about design broadband impedance matching circuit for Coupler to improve power transfer efficiency in the power line communication (PLC) system. The Tchebycheff gain function algorithm is represented to design broadband matching circuit. A practical PLC Coupler impedance matching circuit is designed, and the characteristics for S11 and S21 of PLC coupler are enhanced comparing with unmatched one. This is done by maximizing the power transfer gain from modem to the load.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6839-6845
• /
• 2015

본 논문에서는 다수의 안테나가 필요한 다양한 기능의 광대역 무선 통신 시스템을 한 개의 안테나로 구현하기 위한 슬리브 모노폴 안테나의 광대역 특성 최적화 설계 방법을 제시하였다. 이를 위하여 슬리브 모노폴 안테나의 슬리브 부분이 개방형 스터브로 동작한다는 이론적 해석을 바탕으로 내부 모노폴과 슬리브 부분으로 구성되는 슬리브를 동축 선로로 동작하도록 하고 동축 선로의 특성 임피던스를 조절하여 슬리브의 임피던스 변환회로의 기능을 증대하였다. 슬리브 모노폴 안테나의 넓은 대역폭 확보를 위하여 두꺼운 모노폴을 사용하였고 슬리브의 임피던스 정합 회로로의 특성을 향상하기 위하여 동축 선로 역할을 하는 슬리브의 반경과 슬리브 내부를 구성하는 유전체의 유전율을 조절하여 슬리브 모노폴 안테나의 임피던스 대역폭을 최적화하였다. 두꺼운 모노폴을 사용하고 슬리브를 최적화하여 설계한 슬리브 모노폴 안테나는 반사 계수 10 dB 기준으로 0.80 GHz ~ 2.43 GHz 대역폭을 만족하는 3:1이 넘는 광대역 특성을 보였다. 제안한 슬리브 모노폴 안테나는 상용 이동 통신 주파수 대역에서 다기능 시스템에서 요구되는 다수의 안테나를 한 개의 안테나로 대체 가능할 것으로 기대한다.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.458-465
• /
• 2021

Borate nonlinear optical crystals have been used as frequency conversion devices in many fields due to their unique transparency and nonlinearity from ultraviolet to visible spectral range. In this study, we theoretically and numerically investigate the properties of broadband second harmonic generation (SHG) in the recently reported Pna2₁-Ba₃Mg₃(BO₃)₃F₃ (BMBF) crystal. The technique is based on the simultaneous achievement of birefringence phase matching and group velocity matching between interacting waves. We discussed all factors required for broadband SHG in the BMBF in terms of two types of phase matching and group velocity matching conditions, the beam propagation direction and the corresponding effective nonlinearity and spatial walk-off, and the spectral responses. The results show that bandwidths calculated in the broadband SHG scheme are 220.90 nm (for Type I) and 165.85 nm (for Type II) in full-width-half-maximum (FWHM). The central wavelength in each case is 2047.76 nm for Type I and 1828.66 nm for Type II at room temperature. The results were compared with the non-broadband scheme at the telecom C-band.

• 대한전자공학회논문지TC
• /
• 제40권6호
• /
• pp.247-252
• /
• 2003

본 논문에서는 ETRI의 0.5 ㎛ MESFET 공정을 이용하여 광대역 MMIC 2단 증폭기를 설계 및 제작하였다. 정합회로에 의한 보상 방법(Compensated matching network)을 응용하여 2단 증폭기에서 첫 번째 단과 두 번째 단의 이득 특성이 서로 보상되도록 설계하여 광대역 특성을 얻을 수 있었으며, 일반적인 광대역 증폭기가 넓은 대역폭과 낮은 이득 및 출력 전력을 갖지만 본 논문에서는 compensated matching network를 이용하여 넓은 대역폭뿐만 아니라 높은 이득 특성을 얻었다. 제작된 광대역 증폭기의 측정결과, 1.1∼2.8 ㎓의 대역폭을 가졌으며 S/sub 21/ 이득은 11.1±0.3 ㏈를 얻었다. 전력 특성의 경우 2.4 ㎓에서 입력전력이 4 ㏈m일 때 P1㏈는 12.6 ㏈m을 얻었다.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.453-458
• /
• 2009

This paper presents two methods of designing a Broadband Impedance Matching (BIM) circuit for maximizing a power line communication (PLC) equipment (or Modem) signal injection into its load at any power line connection port. This optimal (BIM) circuit design is achieved in two phases: Butterworth gain function and Tchebycheff gain function. According to the comparison of simulation and practical results, the performances of two gain functions on BIM are discussed.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.615-618
• /
• 2006

본 논문에서는 직접 변환 방식인 six-port의 RF 출력 신호를 검파하고 요구 대역폭에서 입력 주파수 신호에 대한 진폭 및 위상차를 선형적으로 출력하는 광역 power detector를 설계 제작한다. Six-port 출력단에 접속되는 power detector는 높은 정합도를 갖고 반사파로 인한 Six-port 간 위상 불일치를 방지하고, 넓은 대역폭에서 낮은 VSWR을 유지하여야 하는 광역 특성을 갖는 power detector 설계가 필요하다. L-band의 강제 정합 회로와 Ku-band의 정합 회로 그리고 isolator와 정합 회로를 갖는 power detector 회로를 구성하여 요구하는 Six-port 형 power detector 성능을 평가한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권5호
• /
• pp.1984-2002
• /
• 2020

With the appearance of wireless spectrum crisis in traditional cellular network, device-to-device (D2D) communication has been regarded as a promising solution to ease heavy traffic burden by enabling precise content delivery among mobile users. However, due to the channel sharing, the interference between D2D and cellular users can affect the transmission rate and narrow the throughput in the network. In this paper, we firstly present a weighted interference minimization cluster formation model involving both social attribute and physical closeness. The weighted-interference, which is evaluated under the susceptible-infected(SI) model, is utilized to gather user in social and physical proximity. Then, we address the cluster formation problem via spectrum clustering with iterative operation. Finally, we propose the stable matching theory algorithm in order to maximize rate oriented to accomplish the one-to-one resource allocation. Numerical results show that our proposed scheme acquires quite well clustering effect and increases the accumulative transmission rate compared with the other two advanced schemes.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.241-247
• /
• 2016

This paper proposes the design and measurement of a 6-18 GHz front-end receiver module that has been combined into a one- channel output from a two-channel input for electronic warfare support measures (ESM) applications. This module includes a limiter, high-pass filter (HPF), power combiner, equalizer and amplifier. This paper focuses on the design aspects of reducing the noise figure (NF) and matching the phase and amplitude. The NF, linear equalizer, power divider, and HPF were considered in the design. A broadband receiver based on a combined configuration used to obtain low NF. We verify that our receiver module improves the noise figure by as much as 0.78 dB over measured data with a maximum of 5.54 dB over a 6-18 GHz bandwidth; the difference value of phase matching is within $7^{\circ}$ between ports.

• Journal of electromagnetic engineering and science
• /
• 제5권3호
• /
• pp.112-116
• /
• 2005

This paper presents a broadband two-stage low noise amplifier(LNA) operating from 3 to 10 GHz, designed with 0.18 ${\mu}m$ RF CMOS technology, The cascode feedback topology and broadband matching technique are used to achieve broadband performance and input/output matching characteristics. The proposed UWB LNA results in the low noise figure(NF) of 3.4 dB, input/output return loss($S_{11}/S_{22}$) of lower than -10 dB, and power gain of 14.5 dB with gain flatness of $\pm$1 -dB within the required bandwidth. The input-referred third-order intercept point($IIP_3$) and the input-referred 1-dB compression point($P_{ldB}$) are -7 dBm and -17 dBm, respectively.