• Title/Summary/Keyword: Broadband communication system

Search Result 274, Processing Time 0.024 seconds

Broadband Amplifier Using Active Feedback Technique (Active Feeback를 이용한 MMIC 광대역 증폭기 설계)

  • Kang, T. S.;An, D.;Yoon, Y. S.;Rhee, J. K.
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2000.11a
    • /
    • pp.197-201
    • /
    • 2000
  • In this paper, a MMIC(Monolithic Microwave Integrated Circuit) broadband drive amplifier for wireless communication system has designed using active feedback method. The MMIC brodband amplifier was designed using 0.5$\mu\textrm{m}$ MESFET of ETRI library. Simulation results show that gain is 22 dB, and gain flatness ${\pm}$1 dB. Maximum output power 15 dBm and noise figure 2.5 dB in bandwidth 500 MHz ~3.0 GHz. The MMIC Broadband amplifer's chip area is 14mm${\times}$1.4mm.

  • PDF

Design of Tx/Rx Broadband Antenna on LTCC at K/Ka Band (LTCC 공정을 이용한 K/Ka 대역 송수신 겸용 이중 급전 안테나)

  • 천영민;김성남;오민석;최재익;표철식;이종문;천창율
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.53 no.9
    • /
    • pp.481-487
    • /
    • 2004
  • The Ku band that has been using for the satellite communication and broadcasting would be changed to K/Ka bands. The satellite system requires the antenna structure to fabricate low loss and small antenna that is able to be integrated with other Rf circuits for both Rx and Tx. So we should design it with dual feed antennas at K/Ka bands, high isolation between two different feeds and broadband circular polarization. This paper proposes the LTCC(Low Temperature Co-fired Ceramic) process for integration with other Rf circuits and the Axial mode of the helical antenna to satisfy those requirements.

The Design of the Broadband Sleeve Monopole Antenna using Loading Coil (로딩 코일을 이용한 광대역 슬리브 모노폴 안테나의 설계)

  • 최광제
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.13 no.3
    • /
    • pp.250-256
    • /
    • 2002
  • In this paper, a broadband sleeve monopole antenna using a loading coil in sleeve is proposed. The center frequency of the proposed antenna is 1,990MHz. The antenna of the proposed structure has the same of the single sleeve monopole antenna, except for using the coil instead of the inner conductor in sleeve. As a result, it is found that the bandwidth is 1.239~2.154 GHz(above 53.9 %) for $S_{11}=-10\;d B$(VSWR<2), and the antenna impedance is good for a communication system and feeder which the impedance has 50 Ω.

Terminal-Assisted Hybrid MAC Protocol for Differentiated QoS Guarantee in TDMA-Based Broadband Access Networks

  • Hong, Seung-Eun;Kang, Chung-Gu;Kwon, O-Hyung
    • ETRI Journal
    • /
    • v.28 no.3
    • /
    • pp.311-319
    • /
    • 2006
  • This paper presents a terminal-assisted frame-based packet reservation multiple access (TAF-PRMA) protocol, which optimizes random access control between heterogeneous traffic aiming at more efficient voice/data integrated services in dynamic reservation TDMA-based broadband access networks. In order to achieve a differentiated quality-of-service (QoS) guarantee for individual service plus maximal system resource utilization, TAF-PRMA independently controls the random access parameters such as the lengths of the access regions dedicated to respective service traffic and the corresponding permission probabilities, on a frame-by-frame basis. In addition, we have adopted a terminal-assisted random access mechanism where the voice terminal readjusts a global permission probability from the central controller in order to handle the 'fair access' issue resulting from distributed queuing problems inherent in the access network. Our extensive simulation results indicate that TAF-PRMA achieves significant improvements in terms of voice capacity, delay, and fairness over most of the existing medium access control (MAC) schemes for integrated services.

  • PDF

AN ADAPTIVE BEAMFORMING TECHNIQUE FOR WiBro SMART ANTENNA SYSTEM IN MULTIPATH FADING CHANNEL (다중경로 페이딩 환경에서 와이브로 스마트 안테나 시스템의 적응 빔포밍 기술 연구)

  • Jo, Yong-Jin;Oh, Tae-Youl;Chung, Jae-Ho;Choi, Seung-Won
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2008.08a
    • /
    • pp.384-388
    • /
    • 2008
  • Multiple antenna technology, such as multiple input multiple output (MIMO), beamforming is one of the most promising technology for broadband wireless communication. In OFDM environment, we found that as the number of paths is increased, smart antenna system cannot fully exploit beamforming gain. In this paper, we propose a beamforming scheme and analyze the performance of the proposed beamforming scheme in WiBro smart antenna system. WiBro is an OFDMA-based multiple access service for wireless broadband multimedia environment. The proposed beamforming technique for WiBro smart antenna system can effectively improve the performance of the systems in multipath fading environment.

  • PDF

Performance Verification of Active Phased Array Broadband Antenna in Ka-Band (Ka대역 능동위상배열 광대역 안테나 성능 검증 )

  • Youngwan Kim;Jong-Kyun-Back;Hee-Duck Chae;Ji-Han Joo
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.24 no.1
    • /
    • pp.23-30
    • /
    • 2024
  • This paper dedcribes the design. verification, and analysis techniques for an advanced phased array antenna. When applying an active phased array antenna to an aircraft or missile, miniaturization of the array antenna and wide-angle beam steering characteristics can be unavoidable antenna design considerations. In particular, the active reflection coefficient characteristics when electronically steering a wide-angle beam is a design parameter that must be minimized in terms of system survival and system performance. As a radiator suitable for broadband characteristics and wide-angle beam steering, this paper designed an array structure using SFN and minimized the active reflection coefficient according to beam steering of up to 40° based on the spherical coordivate system angle. The bandwidth of the radiator was confirmed to be 3GHz based on active reflection in the Ka-band. In addition, the performance of the actually manufactured 8by8 array antenna wsa analyzed by measuring the single pattern of the radiator through a near-field test, mathematically synthesizing it, and predicting the Tx/TRx beam used in the seeker system.

An IPv6 based Fast Handover Deployment Scheme for WiBro Networks (광대역 무선 인터넷 망에서 IPv6 기반의 고속 핸드오버 도입을 위한 방안)

  • Shim, Min-Sik;Kim, Hwa-Sung
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.11A
    • /
    • pp.1101-1112
    • /
    • 2006
  • With the recent growth in demand for high-data rate multimedia services in the wireless environments, the Mobile Broadband Wireless Access (MBWA) technologies, such as WiBro (Wireless Broadband internet) system, are gradually coming into the spotlight. Unlike the conventional mobile communication networks based on cellular system, the WiBro system basically consists of IP based backbone networks that will be ultimately deployed by Ipv6 (IP version six) based backbone networks according to the All-IP trend for the network evolution. In such wireless mobile environments, it is needed to support the mobility management protocol on network layer as well as physical layer and Medium Access Control (MAC) layer in WiBro system. Accordingly, in this paper, we propose a fast handover scheme for improving the handover performance in IPv6 based WiBro system and show that the proposed scheme achieves loss-free and low handover latency during inter-subnet movement of the mobile stations through the simulation.

Aircraft Embedded Antenna Design for JTDLS Complete System (JTDLS 완성형 체계를 위한 항공기 내장형 안테나 설계)

  • Yeo, Su-Cheol;Kang, Byoung-Wook;Choi, Hyo-Gi
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.15 no.3
    • /
    • pp.451-456
    • /
    • 2020
  • In this paper, we studied the method of designing a embedded antenna for mounting on the JTDLS complete aircraft. The proposed antenna satisfies the MIDS-LVT operation frequency band and is designed as a broadband in consideration of expandability. As a result of the design, it was confirmed that the proposed antenna has similar electrical performance to the existing blade antenna and has broadband characteristics. As a result of EM analysis, the antenna was mounted on the top and bottom parts of the aircraft to check the mount of the aircraft, and it was confirmed that both the top and bottom parts had good radiation characteristics. The technology acquired through this study is judged to be applicable to the JTDLS completed aircraft.

A key-insulated CP-ABE with key exposure accountability for secure data sharing in the cloud

  • Hong, Hanshu;Sun, Zhixin;Liu, Ximeng
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.10 no.5
    • /
    • pp.2394-2406
    • /
    • 2016
  • ABE has become an effective tool for data protection in cloud computing. However, since users possessing the same attributes share the same private keys, there exist some malicious users exposing their private keys deliberately for illegal data sharing without being detected, which will threaten the security of the cloud system. Such issues remain in many current ABE schemes since the private keys are rarely associated with any user specific identifiers. In order to achieve user accountability as well as provide key exposure protection, in this paper, we propose a key-insulated ciphertext policy attribute based encryption with key exposure accountability (KI-CPABE-KEA). In our scheme, data receiver can decrypt the ciphertext if the attributes he owns match with the self-centric policy which is set by the data owner. Besides, a unique identifier is embedded into each user's private key. If a malicious user exposes his private key for illegal data sharing, his identity can be exactly pinpointed by system manager. The key-insulation mechanism guarantees forward and backward security when key exposure happens as well as provides efficient key updating for users in the cloud system. The higher efficiency with proved security make our KI-CPABE-KEA more appropriate for secure data sharing in cloud computing.

FPGA Implementation of SC-FDE Timing Synchronization Algorithm

  • Ji, Suyuan;Chen, Chao;Zhang, Yu
    • Journal of Information Processing Systems
    • /
    • v.15 no.4
    • /
    • pp.890-903
    • /
    • 2019
  • The single carrier frequency domain equalization (SC-FDE) technology is an important part of the broadband wireless access communication system, which can effectively combat the frequency selective fading in the wireless channel. In SC-FDE communication system, the accuracy of timing synchronization directly affects the performance of the SC-FDE system. In this paper, on the basis of Schmidl timing synchronization algorithm a timing synchronization algorithm suitable for FPGA (field programmable gate array) implementation is proposed. In the FPGA implementation of the timing synchronization algorithm, the sliding window accumulation, quantization processing and amplitude reduction techniques are adopted to reduce the complexity in the implementation of FPGA. The simulation results show that the algorithm can effectively realize the timing synchronization function under the condition of reducing computational complexity and hardware overhead.