• Title/Summary/Keyword: Brittleness

Search Result 707, Processing Time 0.024 seconds

The Influence of Pig Breeds on Qualities of Loin (돼지의 품종이 등심의 육질에 미치는 영향)

  • 진상근;김일석;허선진;김수정;정기종
    • Journal of Animal Science and Technology
    • /
    • v.48 no.5
    • /
    • pp.747-758
    • /
    • 2006
  • A total of 30 pigs (average 60kg) were used to investigate the influence of breeds on meat quality. Pigs were alloted into one of three experimental groups [A (Landrace×Yorkshire×Duroc), B (England Berkshire), and C (Kagoshima Berkshire)]. Pigs were slaughtered at approximately 110kg of live weight for measurement of meat qualities. Crude protein was significantly higher in B than those of other pig breed groups. Shear force value was higher and pH was lower in A than those of other pig breeds. In color, C was significantly higher in a* of meat color and lower in b* of fat color and in brittleness, hardness, springiness, chewiness as compared with other pig breeds. Essential fatty acid were significantly higher in A and lower in B than those of other pig breeds. Aspartic, threonine, serine, glutamic and phenylalanine were higher in C, whereas glycine, alanine, cystine, valine, leucine, tyrosine, histidine, lysine and arginine were significantly higher in A. In sensory evaluation of fresh meat, color was significantly higher in C. However, moisture, crude fat, crude ash and drip loss, marbling score, overall acceptability of fresh meat and all items in sensory evaluation of cooked meat were not significant difference among the pig groups. In conclusions, loin from Kagoshima Berkshire had the lowest shear force and the highest a* value. In the current study few effects of pig breeds were observed. Further studies are needed on the relationship between physico-chemical properties and the pig breeds.

Effects of a Mixed Proportion of Alaska Pollack, Chicken Breast Surimi and Starch on Textural Properties of Sausage (명태 및 닭가슴살수리미와 전분의 혼합비율이 소시지의 조직학적 특성에 미치는 영향)

  • Jin, Sang-Keun;Kim, Il-Suk;Yang, Mi-Ra;Hur, In-Chul;Jung, Hyun-Jung;Yang, Han-Sul;Choi, Yeung-Joon
    • Journal of Animal Science and Technology
    • /
    • v.50 no.4
    • /
    • pp.543-550
    • /
    • 2008
  • This study was conducted to determine the effect of different proportions of Alaska pollack surimi, chicken breast surimi and starch on textural properties of sausage. Sausage were manufactured such as Alaska pollack surimi(control), T1(90.91:0:9.09), T2(80:0:20), T3(62.5:37.5:0), T4(58.82:35.3:5.88), T5 (40:60:0) and T6(36.36:54.55:9.09) depending on different proportions of Alaska pollack surimi, chicken breast surimi and starch. Brittleness, breaking force and gel strength were significantly higher in T1 than the control(P<0.05), and breaking force, gel strength and folding test were significantly higher but sensory evaluation was significantly lower in T2 than the control(P<0.05). Breaking force, gel strength and jelly strength were significantly higher in T3 and T4 than the control(P<0.05). Gel characteristics and sensory scores were significantly higher but texture properties were significantly lower in T5 and T6 than the control(P<0.05). The T3 and T4 had similar textural and sensory properties in the surimi- sausage compared to the control. Therefore, the results of this study indicated that textural properties of sausage can be acceptable when chicken breast surimi replaced Alaska pollack up to 35%.

Optimization for Underwater Welding of Marine Steel Plates (선박용 강판의 수중 용접 최적화에 관한 연구)

  • 오세규
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.20 no.1
    • /
    • pp.49-59
    • /
    • 1984
  • Optimizing investigation of characteristics of underwater welding by a gravity type arc welding process was experimentally carried out by using six types of domestic coated welding electrodes for welding of domestic marine structural steel plates (KR Grade A-1, SWS41A, SWS41B,) in order to develop the underwater welding techniques in practical use. Main results obtained are summarized as follows: 1. The absorption speed of the coating of domestic coated lime titania type welding-electrode became constant at about 60 minutes in water and it was about 0.18%/min during initial 8 minutes of absorption time. 2. Thus, the immediate welding electrode could be used in underwater welding for such a short time in comparison with the joint strength of in-atmosphere-and on-water-welding by dry-, wet-or immediate-welding-electrode. 3. By bead appearance and X-ray inspection, ilmenite, limetitania and high titanium oxide types of electrodes were found better for underwater-welding of 10 mm KR Grade A-1 steel plates, while proper welding angle, current and electrode diameter were 6$0^{\circ}C$, above 160A and 4mm respectively under 28cm/min of welding speed. 4. The weld metal tensile strength or proof stress of underwater-welded-joints has a quadratic relationship with the heat input, and the optimal heat input zone is about 13 to 15KJ/cm for 10mm SWS41A steel plates, resulting from consideration upon both joint efficiency of above-100% and recovery of impact strength and strain. Meanwhile, the optimal heat input zone resulting from tension-tension fatigue limit above the base metal's of SWS41A plates is 16 to 19KJ/cm. Reliability of all the empirical equations reveals 95% confidence level. 6. The microstructure of the underwater welds of SES41A welded in such a zone has no weld defects such as hydrogen brittleness with supreme high hardness, since the HAZ-bond boundary area adjacent to both surface and base metal has only Hv400 max with the microstructure of fine martensite, bainite, pearlite and small amount of ferrite.

  • PDF

Effects of Additive materials on the Quality Characteristics of Dasik (다식의 제조시 첨가하는 부재료와 품질특성)

  • 정외숙;박금순
    • Korean journal of food and cookery science
    • /
    • v.18 no.2
    • /
    • pp.225-231
    • /
    • 2002
  • This study was carried out to investigate the possibility of improving the texture and flavor of Dasik by adding various types of sugar (syrup, honey) and flavor ingredients (omija, chija, coffee, green tea extract) to rice powder. Dasik samples were prepared, and the sensory quality and physical characteristics of those were compared. The moisture content of Dasik added with syrup was higher than that of honey. Coffee Dasik with syrup was the highest (23.6) in moisture content. In sensory quality, the omija and coffee Dasik showed the highest score in flavor quality (p<.001). Omija Dasik with honey and coffee Dasik with syrup showed the highest scores in overall acceptability (6.4, 6.2). Green tea Dasik with syrup showed the highest value in the lightness (L) of color. Omija Dasik with syrup showed the highest value in the redness (a) of color Chija Dasik was the highest in the yellowness(b) of color. In physical characteristics, the hardness was negatively correlated with the moistness, tenderness, and texture acceptability in sensory quality(p〈0.001). The cohesiveness was positively correlated with the overall acceptability in sensory quality (p〈0.01). In the relation of texture characteristics and sensory quality, the higher the moisture content, the lower the hardness and springiness were, but the higher the brittleness and the cohesiveness were(p〈.001). Overall, omija and coffee Dasik appeared to have desirable flavor, taste and overall acceptability.

Physicochemical and Sensory Properties of Pan Bread Made with Various Amounts of Squeezed Perilla Leaf Juice (깻잎착즙액을 이용하여 제조한 식빵의 이화학적 및 관능적 특성)

  • Oh, Suk-Tae;Kim, Kee-Hyuk;Kim, Won-Mo;Lee, Gyu-Hee
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.46 no.7
    • /
    • pp.833-840
    • /
    • 2017
  • For wide application of perilla leaf, which has various healthy functions and can be easily cultured across Korea, the physicochemical and sensory properties of pan bread made with various amounts of squeezed perilla leaf juice (SPLJ) were analyzed. When dough characteristics were analyzed by using farinograph, consistency and dough development time were not significantly different between the control and bread dough made with various amounts of SPLJ, whereas dough stability time increased with increasing SPLJ amount. Expansion rate of dough decreased with increasing SPLJ amount. The volume, specific volume, and baking loss rate of pan bread made with various SPLJ amounts decreased with increasing SPLJ amount. Pan bread crumb colors became thickened and greenish with increasing SPLJ amount. For physical properties of pan bread made with various SPLJ amounts, springiness and cohesiveness decreased with increasing SPLJ amount, whereas brittleness, chewiness, and hardness increased with increasing SPLJ amount. In the sensory strength analysis, pore uniformity and soft texture decreased with increasing SPLJ amount, whereas crumb color (dark greenish), perilla leaf odor, perilla leaf taste, and chewing texture increased with increasing SPLJ amount. In the overall acceptance analysis, 1.5% SPLJ was the most preferred with a score of 7.10. However, statistical differences between 1.5% and 1.0% SPLJ were not detected at P<0.05. In the partial least squares analysis, consumers liked bread with a green crumb color, perilla leaf odor, perilla leaf taste, and soft and chewing texture. In conclusion, physicochemical properties of pan bread made with SPLJ were less desirable than those of the control; however, consumer acceptance of pan bread made with 1.5% SPLJ was shown the highest. Therefore, methods for increasing physicochemical properties of pan bread made with SPLJ need to be developed for wide application of perilla leaf.

Quality Characteristics of Low-fat Emulsified Sausage Containing Tomatoes during Cold Storage (토마토가 함유된 저지방 유화형 소시지의 냉장 저장 중 품질 특성)

  • Hoe, Soon-Ku;Park, Ki-Hoon;Yang, Mi-Ra;Jeong, Ki-Jong;Kim, Dong-Hoon;Choi, Jine-Shang;Jin, Sang-Keun;Kim, Il-Suk
    • Food Science of Animal Resources
    • /
    • v.26 no.3
    • /
    • pp.297-305
    • /
    • 2006
  • This study was conducted to evaluate the quality characteristics of low-fat emulsion type sausages containing 0% tomato powder (C), 5.0% ground raw tomato paste (T1) and 0.5% freeze dried tomato powder (T2) during storage at $5{\pm}1^{\circ}C$ for 30 days. The crude protein content of T2 was significantly lower (p<0.05) than that of the other sausage types. Moisture, crude fat and crude ash contents of the sausages during storage were not affected by the addition of tomato. The pH and shear force ($kg/cm^2$) values of C were significantly higher (p<0.05) than those of T1 and T2. There was no significant difference among the different sausages in cooking loss, ranging from $13.00{\sim}14.98%$. The WHC values of T1 and T2 were significantly higher (p<0.05) than that of C. The values of TBARS were significantly (p<0.05) increased for ail sausages following storage. The TBARS value (mg MA/kg) of C was significantly higher (p<0.05) than those of T1 and T2 at 15 days of storage, however T1 was significantly higher (p<0.05) than the other sausages after 30 days of storage. The meat color values tended to decrease with increased storage time. Microorganism analysis revealed that all sausage types did not reach $4.4log_{10}CFU/g$ until 30 days of storage. The texture, brittleness, Hardness, and springiness of each sausage type were not significantly different after 1 day of storage, while the cohesiveness, gumminess and chewiness of T1 and T2 were significantly higher (p<0.05) than that of C. T1 and T2 sausages had a slightly higher score regarding color, aroma, tenderness and overall acceptability, however the sensory evaluation score among the different sausage types was not significantly different (p>0.05). In conclusion, low-fat sausage with added tomato showed higher lipid oxidative stability during storage than sausage to which no tomato was added.

Study on the Manufacturing techniques & Conservation of Iron Pot from Cheonmachong Ancient Tomb (천마총 출토 철부(鐵釜)의 제작기법 및 보존처리)

  • Lee, Seung Ryul;Shin, Yong Bi;Jung, Won Seob
    • Journal of Conservation Science
    • /
    • v.30 no.3
    • /
    • pp.263-275
    • /
    • 2014
  • It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.

Analysis of Flexural Behavior of Composite Beam with Steel Fiber Reinforced Ultra High Performance Concrete Deck and Inverted-T Shaped Steel with Tension Softening Behavior (인장연화거동을 고려한 강섬유 보강 초고성능 콘크리트 바닥판과 역T형 강재 합성보의 휨거동 해석)

  • Yoo, Sung-Won;Yang, In-Hwan;Jung, Sang-Hwa
    • Journal of the Korea Concrete Institute
    • /
    • v.27 no.2
    • /
    • pp.185-193
    • /
    • 2015
  • Ultra high performance concrete (UHPC) has been developed to overcome the low tensile strengths and brittleness of conventional concrete. Considering that UHPC, owing to its composition and the use of steel fibers, develops a compressive strength of 180 MPa as well as high stiffness, the top flange of the steel girder may be superfluous in the composite beam combining a slab made of UHPC and the steel girder. In such composite beam, the steel girder takes the form of an inverted-T shaped structure without top flange in which the studs needed for the composition of the steel girder with the UHPC slab are disposed in the web of the steel girder. This study investigates experimentally and analytically the flexural behavior of this new type of composite beam to propose details like stud spacing and slab thickness for further design recommendations. To that goal, eight composite beams with varying stud spacing and slab thickness were fabricated and tested. The test results indicated that stud spacing running from 100 mm to 2 to 3 times the slab thickness can be recommended. In view of the relative characteristic slip limit of Eurocode-4, the results showed that the composite beam developed ductile behavior. Moreover, except for the members with thin slab and large stud spacing, most of the specimens exhibited results different to those predicted by AASHTO LRFD and Eurocode-4 because of the high performance developed by UHPC.

Gel and Texture Properties of Fish-meat Gel Prepared with Pagrus major in Comparison to Different Grades of Alaska Pollock (도미를 활용하여 제조한 연제품의 겔 및 texture 특성)

  • Gao, Ya;Oh, Jung Hwan;Karadeniz, Fatih;Lee, Seul-Gi;Kim, Hyung Kwang;Kim, Se Jong;Jung, Jun Mo;Cheon, Ji Hyeon;Kong, Chang-Suk
    • Journal of Life Science
    • /
    • v.26 no.8
    • /
    • pp.955-962
    • /
    • 2016
  • Fish-meat gel is an intermediate product used in a variety of surimi-based seafood. One of the most-used raw materials of fish-meat gel is Alaska Pollock due to its high-quality meat in terms of gel strength and texture. However, increasing demand for fish-meat gel, along with overexploitation of the wild catch Alaska Pollock, has put the industry in need of low-cost sustainable alternative sources for fish-meat gel. Pagrus major (PM) is a widely aquacultured fish known for having white meat that is low in fat. The current study compares the quality of fish-meat gel prepared from aquacultured PM to that of high and mid-grade Alaska Pollock fish-meat gel. Gels were compared in terms of gel strength, texture, color, and protein pattern. Results indicated that fish-meat gels prepared from PM were superior to Alaska Pollock fish-meat gels with regard to gel strength, hardness, springiness, chewiness, cutting strength, and breaking force. In addition, although not matching in quality, PM exhibited a cohesiveness, whiteness, and expressible moisture content comparable to Alaska Pollock of both grades. Protein pattern analysis also showed that PM and Alaska Pollock fish-meat gels had similar protein profiles before and after gel preparation. Therefore, P. major is suggested as a potential substitute for Alaska Pollock in fish-meat gel production.

Experiment of Flexural Behavior of Composite Beam with Steel Fiber Reinforced Ultra High Performance Concrete Deck and Inverted-T Steel Girder (강섬유로 보강된 초고성능 콘크리트 바닥판과 역T형 강거더 합성보의 휨거동 실험)

  • Yoo, Sung-Won;Ahn, Young-Sun;Cha, Yeong-Dal;Joh, Chang-Bin
    • Journal of the Korea Concrete Institute
    • /
    • v.26 no.6
    • /
    • pp.761-769
    • /
    • 2014
  • Ultra high performance concrete (UHPC) has been developed to overcome the low strengths and brittleness of conventional concrete. Considering that UHPC, owing to its composition and the use of steel fibers, develops a compressive strength of 180 MPa as well as high stiffness, the top flange of the steel girder may be superfluous in the composite beam combining a slab made of UHPC and the steel girder. In such composite beam, the steel girder takes the form of an inverted-T shaped structure without top flange in which the studs needed for the composition of the steel girder with the UHPC slab are disposed in the web of the steel girder. This study investigates experimentally and analytically the flexural behavior of this new type of composite beam to propose details like stud spacing and slab thickness for further design recommendations. To that goal, eight composite beams with varying stud spacing and slab thickness were fabricated and tested. The test results indicated that stud spacing running from 100 mm to 2 to 3 times the slab thickness can be recommended. In view of the relative characteristic slip limit of Eurocode-4, the results showed that the composite beam developed ductile behavior. Moreover, except for the members with thin slab and large stud spacing, most of the specimens exhibited results different to those predicted by AASHTO LRFD and Eurocode-4 because of the high performance developed by UHPC.