• 토지주택연구
• /
• 제11권2호
• /
• pp.75-86
• /
• 2020

As the urban regeneration project and the old housing maintenance project are actively progressing in Korea, small-scale building construction is being carried out in downtown areas. Small buildings in the downtown area are constructed on about 4 to 10 floors, and since they are carried out in small units in residential areas, it is difficult to enter large equipment to construct existing piles, and it is more vulnerable to complaints about noise and vibration. in this study, helical piles suitable for urban areas or small sites where it is difficult to enter large equipment, such as noise and vibration. Reliability analysis was performed on the results of the static load tests and dynamic load tests conducted at the LH site and the bearing capacity calculated by the hydrostatic method and the empirical formula (N value). As a result of comparing and analyzing the design formula and the results of static load test and dynamic load tests, the correlation between the design formula of the bored pile (Road bridge design standard) formula using N value and the design formula by the modified Davisson method frequently used by method commonly European helical file practitioners.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권4호
• /
• pp.146-154
• /
• 2011

최근 사회기반시설물에 대한 공공투자는 신규건설에 대한 지출이 감소하고 유지관리분야에 대한 지출이 점진적으로 늘어나는 추세로 변화되고 있다. 이에 따라 해외 도로시설물에 대한 유지관리분야에서도 선진 개념인 자산관리 방법론이 접목되고 있으며, 보다 근본적인 시스템 개선이 요구되고 있다. 따라서 본 연구에서는 중소규모 도로관리주체에서 사용할 수 있는 자산관리개념의 유지관리 프로그램을 개발하여 예산편성의 효율성을 높이고, 도로망 전체를 고려한 네트워크 방식의 합리적인 유지보수 방안을 제시하고자 한다. 또한, 향후 다수의 시설물을 통합적으로 관리할 수 있는 체계 및 방법론을 정립하였다.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.70-77
• /
• 2004

A Reasonable lighting should be provided for doing night work. All works far construction site can be exposed to potential hazard at night work The purpose of this study is to provide a standard of the lighting against accidents due to insufficient lighting at site. one pilot tea one at building work site, one at mad work site of it have been conducted for figuring out illumination change depending worker's activity direction, using lux checker to show it as numerical indication. The direction are changed with a range of 30, 60, 90, and 135 degree to be checked at site. Tests results show that $10\%\;and\;15\%$ of lighting could be decreased by changing the working direction of works at site. Therefore, steep slope place, cave work and backside of structural elements such as a column, deep beam should be considered for keeping sufficient and reasonable lighting. It is found that $50\%more$ illumination Lux needs f3r civil work than for building work.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 춘계학술대회
• /
• pp.199-212
• /
• 2005

Many countries of the world is driving forward development of large-scale hub port. They are now pushing ahead with setting up of effective marketing strategies to survive in keen competitions of the 21st century port industry. The port is of ever increasing importance for the bridge connecting sea and road transportation in handling international cargoes. The port, differently from general working places, is a closed area required for security, customs, and quarantine procedures. The loading and unloading is being done differently by ports, cargoes, and ships. To do loading and unloading, a lot of equipment and different types of labor are required, which flow is complicated and safe management is essential. As above mentioned the port is very unique and very deteriorated working place in its working environment. The purpose of this study is to propose ways to reduce and prevent from port accidents. As first step to do this, we have collected 923 accidents happened at Incheon Port during the period of 1994 to 2003. We have thoroughly analyzed characteristics, harmfulness, and risk of the loading/unloading they have done, as well as the accident frequency and relationship between the accidents. As second step to further analyze, We have employed DMAIC technology, an advanced process of 6 sigma presently in spotlight as the best program for management innovation. This analysis results in recognition of important accident characteristics, causes and effects analysis, critical causes of accident, and suggestions to decrease accidents.

• Wind and Structures
• /
• 제14권1호
• /
• pp.55-70
• /
• 2011

This study investigates the design criteria required for wind barriers to protect vehicles running on an expressway under a high side wind. At the first stage of this study, the lateral deviations of vehicles in crosswinds were computed from the commercial software, CarSim and TruckSim, and the critical wind speeds for a car accident were then evaluated from a predefined car accident index. The critical wind speeds for driving stability were found to be 35 m/s for a small passenger car, yet 30 m/s for a truck and a bus. From the wind tunnel tests, the minimum height of a wind barrier required to reduce the wind speed by 50% was found to be 12.5% of the road width. In the case of parallel bridges, the placement of two edge wind barriers plus one wind barrier at center was recommended for a separation distance larger than 20 m (four lanes) and 10 m (six lanes) respectively, otherwise two wind barriers were recommended.

• 대한안전경영과학회지
• /
• 제7권2호
• /
• pp.13-27
• /
• 2005

Many countries of the world is driving forward development of large-scale hub port. They are now pushing ahead with setting up of effective marketing strategies to survive in keen competitions of the 21st century port industry. The port is of ever increasing importance for the bridge connecting sea and road transportation in handling international cargoes. The port, differently from general working places, is a closed area required for security, customs, and quarantine procedures. The loading and unloading is being done differently by ports, cargoes, and ships. To do loading and unloading, a lot of equipment and different types of labor are required, which flow is complicated and safe management is essential. As above mentioned the port is very unique and very deteriorated working place in its working environment. The purpose of this study is to propose ways to reduce and prevent from port accidents. As first step to do this, we have collected 923 accidents happened at Incheon Port during the period of 1994 to 2003. We have thoroughly analyzed characteristics, harmfulness, and risk of the loading/unloading they have done, as well as the accident frequency and relationship between the accidents. As second step to further analyze, We have employed DMAIC technology, an advanced process of 6 sigma presently in spotlight as the best program for management innovation. This analysis results in recognition of important accident characteristics, causes and effects analysis, critical causes of accident, and suggestions to decrease accidents.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 추계학술발표대회 논문집
• /
• pp.191-192
• /
• 2005

This project is to establish an annex clinic center under 5 floors with gross floor area of 3,000 Pyeong behind existing Chosun university Hospital main building with 600 beds. The goal of the design is connecting the new clinic center with the existing main building and completing a combined hospital that has synergy effects. Given the old condition of the hospital and characteristics of the ground, I tried to embody the image of Medical Pulse, which is very alive with strong pulse, and suggest vision of 21st century hospital. First, one main entrance as a combined hospital. For optimum access and functions, I used the entrance of existing building as the only main entrance of new combined hospital, rearrange the road in front of the main building and improve traffic system, and upgrade the image and function of combined main entrance by planning new atrium united robby that makes link to the main building easier. Second, section planning considering the optimum functions and convenience. I established 4 floors linking functionally with the existing building, minimized vertical traffic line, and enhanced convenience through barrier free environment, which is a horizontal traffic line without barriers, crucial to hospital. Third, combined zoning generating synergy effects. I linked sterilizing room with logistics center by operating room and service bridge, and arranged central treatment department horizontally, Also, by horizontally arranging cancer center and department of nuclear medicine close with PET and cyclotron center, I established identity of specialized departments.

• 토지주택연구
• /
• 제12권3호
• /
• pp.87-96
• /
• 2021

국내는 유럽에서 널리 사용하고 있는 헬리컬 파일을 많이 사용하기 시작하였지만, 헬리컬 파일의 설계기준을 만들려고 하는 노력이 부족하여, 여전히 헬리컬 파일의 표준설계기준을 가지고 있지 못하다. 따라서, 본 연구는 현장에서 헬리컬 파일을 시공하고 재하시험을 실시한 후, 이전 데이터를 포함하여 신뢰도 분석을 실시하였다. 그 결과 매입 말뚝에 대한 도로교설계기준 식이 수정 Davisson 분석법과 연계하여 좋은 신뢰도와 일관성을 보여주었는데, 이 설계식의 저항편향계수가 '1.0'에 가까웠고 변동성도 '낮음' 수준을 보여 주었기 때문이다.

• Earthquakes and Structures
• /
• 제16권1호
• /
• pp.1-9
• /
• 2019

To provide a simplified method for the base isolation design of LNG tanks, such as $16{\times}104m^3$ LNG tanks, we conducted a derivation and calculation example analysis of the dynamic response of the base isolation of LNG storage tanks, using dynamic response analysis theory with consideration of pile-soil interaction. The ADINA finite element software package was used to conduct the numerical simulation analysis, and compare it with the theoretical solution. The ground-shaking table experiment of LNG tank base isolation was carried out simultaneously. The results show that the pile-soil interaction is not obvious under the condition of base isolation. Comparing base isolation to no isolation, the seismic response clearly decreases, but there is less of an effect on the shaking wave height after adopting pile top isolation support. This indicates that the basic isolation measures cannot control the wave height. A comparison of the shaking table experiment with the finite element solution and the theoretical solution shows that the finite element solution and theoretical solution are feasible. The three experiments are mutually verified.

• Computers and Concrete
• /
• 제27권5호
• /
• pp.407-416
• /
• 2021

The checking stresses in the Chinese codes for reinforced concrete (RC) or prestressed concrete (PC) bridges are aimed for the thin-web beam, which cannot reflect the actual behavior of the modern structures. The incompleteness of the checking stresses could give rise to the deficiency in the design and calculation, and unable to reveal the reason of some common cracks in the structure. In this paper, the complete stress checklist for RC or PC girder bridges are listed, as well as the corresponding crack shapes. The expression of the complete checking stresses is proposed in details. Spatial Grid Model can reflect all the concerned stresses in the structure. Through the comparison of the calculation results from the spatial grid model and the solid model, it is seen that the spatial grid model can reflect load effects such as shear lag effect, thin-wall effect and local effect. The stresses obtained from the spatial grid model could help engineers to have a good understanding of the structural behavior. Meanwhile, the stress checklist provides the information for analyzing and solving the deficiency in the structure.